A library to help you search, validate, and convert between US state names and postal codes.
License: MIT License
A library to help you search, validate, and convert between US state names and state codes.
npm install us-state-codes --savevar states = require('us-state-codes');
var stateCode = 'HI.';
var stateName = '(HawAiI) ';
assert(states.sanitizeStateCode(stateCode) === 'HI');
assert(states.sanitizeStateName(stateName) === 'Hawaii');
assert(states.getStateNameByStateCode(stateCode) === 'Hawaii');
assert(states.getStateCodeByStateName(stateName) === 'HI');
🚨 You need to enable Continuous Integration on all branches of this repository. 🚨
To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because it uses your CI build statuses to figure out when to notify you about breaking changes.
Since we didn’t receive a CI status on the greenkeeper/initial branch, it’s possible that you don’t have CI set up yet. We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.
If you have already set up a CI for this repository, you might need to check how it’s configured. Make sure it is set to run on all new branches. If you don’t want it to run on absolutely every branch, you can whitelist branches starting with greenkeeper/.
Once you have installed and configured CI on this repository correctly, you’ll need to re-trigger Greenkeeper’s initial pull request. To do this, please delete the greenkeeper/initial branch in this repository, and then remove and re-add this repository to the Greenkeeper App’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.
| Province | Code |
|---|---|
| Alberta, CA | AB |
| British Columbia, CA | BC |
| Manitoba, CA | MB |
| New Brunswick, CA | NB |
| Newfoundland and Labrador, CA | NL |
| Northwest Territories, CA | NT |
| Nova Scotia, CA | NS |
| Nunavut, CA | NU |
| Ontario, CA | ON |
| Prince Edward Island, CA | PE |
| Quebec, CA | QC |
| Saskatchewan, CA | SK |
| Yukon, CA | YT |
The code is just a few files, but there several kBs of lodash dependencies. Can we replace those dependencies with native JS functions?
I opened PR #55 with a potential solution.
We use this to sanitize US addresses, but just ran into an issue because Guam (GU) isn't supported. I guess it's not a state, but it would be nice if it was handled too (along with the Marshall Island, Virgin Islands, etc.).
See the USPS abbreviation list: https://pe.usps.com/text/pub28/28apb.htm
This issue lists Renovate updates and detected dependencies. Read the Dependency Dashboard docs to learn more.
These updates have been manually edited so Renovate will no longer make changes. To discard all commits and start over, click on a checkbox.
These updates have all been created already. Click a checkbox below to force a retry/rebase of any.
.circleci/config.yml
circleci/node 10.16
package.json
lodash.invert ^4.3.0lodash.isstring ^4.0.1lodash.map ^4.6.0chai ^4.2.0mocha ^6.0.0
🚨 You need to enable Continuous Integration on all branches of this repository. 🚨
To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because it uses your CI build statuses to figure out when to notify you about breaking changes.
Since we didn’t receive a CI status on the greenkeeper/initial branch, it’s possible that you don’t have CI set up yet. We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.
If you have already set up a CI for this repository, you might need to check how it’s configured. Make sure it is set to run on all new branches. If you don’t want it to run on absolutely every branch, you can whitelist branches starting with greenkeeper/.
Once you have installed and configured CI on this repository correctly, you’ll need to re-trigger Greenkeeper’s initial pull request. To do this, please delete the greenkeeper/initial branch in this repository, and then remove and re-add this repository to the Greenkeeper App’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.
There is an error with this repository's Renovate configuration that needs to be fixed. As a precaution, Renovate will stop PRs until it is resolved.
Error type: Cannot find preset's package (helpers:disableTypesNodeMajor). Note: this is a nested preset so please contact the preset author if you are unable to fix it yourself.
🚨 You need to enable Continuous Integration on all branches of this repository. 🚨
To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because it uses your CI build statuses to figure out when to notify you about breaking changes.
Since we didn’t receive a CI status on the greenkeeper/initial branch, it’s possible that you don’t have CI set up yet. We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.
If you have already set up a CI for this repository, you might need to check how it’s configured. Make sure it is set to run on all new branches. If you don’t want it to run on absolutely every branch, you can whitelist branches starting with greenkeeper/.
Once you have installed and configured CI on this repository correctly, you’ll need to re-trigger Greenkeeper’s initial pull request. To do this, please delete the greenkeeper/initial branch in this repository, and then remove and re-add this repository to the Greenkeeper App’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
Django
The Web framework for perfectionists with deadlines.
Laravel
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
Microsoft
Open source projects and samples from Microsoft.
Google
Google ❤️ Open Source for everyone.
Alibaba
Alibaba Open Source for everyone
D3
Data-Driven Documents codes.
Tencent
China tencent open source team.
