ULX4M

Modular FPGA board

• Create few simple boards with different type of connectors
• Board will have powersupply and few leds -- changed to HDMI connector
• Order boards
• Study FPGA pinout and the way we can connect ECP5
• Have some pictures/animation of boards snapping together
• Assembly Board and test connections
• Start to work on module board that will have selected connectors
• Order board
• Have some pictures/animation of boards snapping together
• Assembly
• Board should slip into connector and blink some leds
• Starting to work on mainboard
• Add all ULX3S perifers to the board, and leave placeholders for new periferal
• User opinions, considering/fullfilling wishlists, beautification
• Blender animation
• Study other FPGA vendors
• Main board assembly
• Write verilog examples
• Test all onboard periferal
• Adding periferals to the board
• Ordering
• Start to work on some other vendor module board
• Do some blender animation with main board and different vendors
• Assembly main board
• Write some Verilog test examples
• Test onboard periferal