evcape makes your caps lock key work as both ctrl and an esc key, depending on whether you combine it with another key (acts as ctrl) or release it immediately (acts as esc). this is ideal for vim bindings.

in general, evcape simulates an additional key press (e.g. escape or backspace) when a modifier key (e.g. shift or control) is pressed and immediately released.

evcape is a small daemon that listens to keyboard events using the linux input subsystem, and uses simple rules to detects patterns and take corresponding actions.

it uses evdev, udev and uinput and hence works with wayland and on the console, unlike evcape's inspiration, xcape.

WARNING: this is alpha quality software, use at your own risk!

• simple rule language for configuration works
• keyboard input event detection works
• keyboard simulation works
• monitoring of hotplug events (external keyboards) works

evcape is written using python 3.

make sure you have the python (3) libraries installed for:

• evdev
• pyudev
• six

on debian/ubuntu this would be:

apt install python3-evdev python3-pyudev python3-six

alternatively, use a virtualenv for isolation:

virtualenv --python=python3 venv
source venv/bin/activate
pip install -r requirements.txt

make caps lock an extra control. gnome has a ui for it: gnome-tweak-tool, keyboard, extra options, ‘caps lock is control’. alternatively, use something like this:

setxkbmap -option "ctrl:nocaps"

then run evcape:

./evcape.py

you may need to run with root permissions to access raw input devices:

sudo ./evcape.py

or, if you use a virtualenv:

source venv/bin/activate
python ./evcape.py

pass --help for usage options.

by default, the built-in rules make caps/control act as escape. alternatively, specify your own rules on the command line.

to start upon login, one option is to use a systemd user service, e.g. ~/.config/systemd/user/evcape.service. here is an example with some custom rules:

[Unit]
Description=evcape

[Service]
ExecStart=/path/to/evcape.py \
    press:leftctrl,release:leftctrl=press:esc,release:esc \
    press:capslock,release:capslock=press:esc,release:esc \
    press:rightshift,release:rightshift=press:backspace,release:backspace \
    press:rightctrl,release:rightctrl=press:backspace,release:backspace
Restart=always

[Install]
WantedBy=default.target

(note: this is based on an ubuntu system.)

evcape operates on a fairly low level of the input stack: it needs to access to raw input devices to read events and also needs to inject keyboard events. this means evcape is both a ‘key logger’ (without logging anything!) and a fake keyboard.

things like that can typically only be don by the root user, but this can be avoided by elevating your user's privileges to access input devices. this improves the situation somewhat, but keep in mind that evcape still has complete control over the input stack.

typically, input devices are owned by the group input:

$ ls -al /dev/input/event0
crw-rw---- 1 root input 13, 64 jan  3 13:26 /dev/input/event0

adding yourself to that group will enable you to use those devices:

$ sudo adduser $(whoami) input

to simulate key presses, /dev/uinput is used, which is owned by root directly. this can be changed to use a newly created uinput group:

$ sudo addgroup --system uinput
$ sudo adduser $(whoami) uinput

add a udev rule to make /dev/uinput use this group by creating a new file, /etc/udev/rules.d/99-uinput.rules, with these contents:

KERNEL=="uinput", GROUP="uinput", MODE:="0660"

now reboot to make all changes take effect. afterwards, it should look like this:

$ ls -al /dev/uinput
crw-rw---- 1 root uinput 10, 223 jan  3 13:26 /dev/uinput

wouter bolsterlee. wbolster.

https://github.com/wbolster on github. star my repos. fork them. and so on.

https://twitter.com/wbolster on twitter. follow me. or say hi.

• evcape is inspired by xcape (https://github.com/alols/xcape),s but is not limited to xorg.
• caps2esc (https://gitlab.com/interception/linux/plugins/caps2esc)s is a c implementation of xcape without the X dependency. it is part of a project called ‘interception tools’ (https://gitlab.com/interception/linux/tools).