A Serverless v1.x plugin to build your lambda functions with Webpack.

This plugin is for you if you want to use the latest Javascript version with Babel; use custom resource loaders; try your lambda functions locally and much more!

BREAKING CHANGE IN v2: webpack must now be installed alongside serverless-webpack as a peer dependency. This allows more control over which version of Webpack to run.

$ npm install serverless-webpack --save-dev

Add the plugin to your serverless.yml file:

plugins:
  - serverless-webpack

By default the plugin will look for a webpack.config.js in the service directory. Alternatively, you can specify a different file or configuration in serverless.yml:

custom:
  webpack: ./folder/my-webpack.config.js

An base Webpack configuration might look like this:

// webpack.config.js

module.exports = {
  entry: './handler.js',
  target: 'node',
  module: {
    loaders: [ ... ]
  }
};

serverless-webpack exposes a lib object, that can be used in your webpack.config.js to make the configuration easier and to build fully dynamic configurations.

You can let the plugin determine the correct handler entry points at build time. Then you do not have to care anymore when you add or remove functions from your service:

// webpack.config.js
const slsw = require('serverless-webpack');

module.exports = {
  ...
  entry: slsw.lib.entries,
  ...
};

Custom entries that are not part of the SLS build process can be added too:

// webpack.config.js
const _ = require('lodash');
const slsw = require('serverless-webpack');

module.exports = {
  ...
  entry: _.assign({
    myCustomEntry1: './custom/path/something.js'
  }, slsw.lib.entries),
  ...
};

The lib export also provides the serverless and options properties, through which you can access the Serverless instance and the options given on the command-line.

This enables you to have a fully customized dynamic configuration, that can evaluate anything available in the Serverless framework. There are really no limits.

Samples are: The current stage and the complete service definition. You thereby have access to anything that a Serverless plugin would have access to.

Both properties should be handled with care and should never be written to, as that will modify the running framework and leads to unpredictable behavior!

If you have cool use cases with the full customization, we might add your solution to the plugin examples as showcase.

Note that, if the output configuration is not set, it will automatically be generated to write bundles in the .webpack directory. If you set your own output configuration make sure to add a libraryTarget for best compatibility with external dependencies:

// webpack.config.js

module.exports = {
  // ...
  output: {
    libraryTarget: 'commonjs',
    path: '.webpack',
    filename: 'handler.js', // this should match the first part of function handler in `serverless.yml`
  },
  // ...
};

By default, the plugin will try to bundle all dependencies. However, you don't want to include all modules in some cases such as selectively import, excluding builtin package (ie: aws-sdk) and handling webpack-incompatible modules.

In this case you might add external modules in Webpack's externals configuration. Those modules can be included in the Serverless bundle with the webpackIncludeModules option in serverless.yml:

// webpack.config.js
var nodeExternals = require('webpack-node-externals')

modules.export = {
  // we use webpack-node-externals to excludes all node deps.
  // You can manually set the externals too.
  externals: [nodeExternals()],
}

# serverless.yml
custom:
  webpackIncludeModules: true # enable auto-packing of external modules

All modules stated in externals will be excluded from bundled files. If an excluded module is stated as dependencies in package.json, it will be packed into the Serverless artifact under the node_modules directory.

By default, the plugin will use the package.json file in working directory, If you want to use a different package file, set packagePath to your custom package.json:

# serverless.yml
custom:
  webpackIncludeModules:
    packagePath: '../package.json' # relative path to custom package.json file.

Note that only relative path is supported at the moment.

You can find an example setups in the examples folder.

The normal Serverless deploy procedure will automatically bundle with Webpack:

• Create the Serverless project with serverless create -t aws-nodejs
• Install Serverless Webpack as above
• Deploy with serverless deploy

The plugin integrates very well with serverless-offline to simulate AWS Lambda and AWS API Gateway locally.

Add the plugins to your serverless.yml file and make sure that serverless-webpack precedes serverless-offline as the order is important:

  plugins:
    ...
    - serverless-webpack
    ...
    - serverless-offline
    ...

Run serverless offline or serverless offline start to start the Lambda/API simulation.

In comparison to serverless offline, the start command will fire an init and a end lifecycle hook which is needed for serverless-offline and e.g. serverless-dynamodb-local to switch off resources (see below).

You can find an example setup in the examples folder.

If you do not use the default path and override it in your Webpack configuration, you have use the --location option.

Configure your service the same as mentioned above, but additionally add the serverless-dynamodb-local plugin as follows:

  plugins:
    - serverless-webpack
    - serverless-dynamodb-local
    - serverless-offline

Run serverless offline start.

You can reduce the clutter generated by serverless-offline with --dontPrintOutput and disable timeouts with --noTimeout.

To run your bundled functions locally you can:

$ serverless webpack invoke --function <function-name>

Options are:

• --function or -f (required) is the name of the function to run
• --path or -p (optional) is a JSON file path used as the function input event

Or to run a function every time the source files change use watch:

$ serverless webpack watch --function <function-name> --path event.json

Options are:

• --function or -f (required) is the name of the function to run
• --path or -p (optional) is a JSON file path used as the function input event

To just bundle and see the output result use:

$ serverless webpack --out dist

Options are:

• --out or -o (optional) The output directory. Defaults to .webpack.

The integrated simulation functionality will be removed in version 3 in favor of using serverless-offline (see #135) which already does the job perfectly and fully integrates with serverless-webpack. Please switch to serverless-offline if you do not use it already.

To start a local server that will act like API Gateway, use the following command. Your code will be reloaded upon change so that every request to your local server will serve the latest code.

$ serverless webpack serve

Options are:

• --port or -p (optional) The local server port. Defaults to 8000

The serve command will automatically look for the local serverless.yml and serve all the http events. For example this configuration will generate a GET endpoint:

functions:
  hello:
    handler: handler.hello
    events:
      - http:
          method: get
          path: hello

In the examples folder there is a Serverless project using this plugin with Babel. To try it, from inside the example folder:

• npm install to install dependencies
• serverless webpack run -f hello to run the example function

Plugin commands are supported by the following providers. ⁇ indicates that command has not been tested with that provider.

• 2.2.0

  • Allow full dynamic configurations #158
  • Fix a bug that prevented the entries lib export to work with TypeScript #165

• 2.1.0

  • Added support for webpack configuration in TypeScript format #129
  • Fixed bug with serverless-offline exec #154
  • Added unit tests for cleanup. Updated test framework #11
  • Support single function deploy and packaging #107
  • Fixed path exception bug with individual packaging and SLS 1.18 #159

• 2.0.0

  • Support arbitrary Webpack versions as peer dependency #83
  • Support serverless offline start invocation #131
  • Documentation updates #88, #132, #140, #141, #144
  • Print Webpack stats on recompile #127