Pebble smartwatch app using Pulse-Width-Modulation and Framebuffer tricks to render grayscale PNGs to Pebble E-Paper Black and White display.

(!Notice! : Uses Pebble SDK 2.0 from developer.getpebble.com/2 )

The Pebble Smartwatch display is a low-power E-Paper display, like E-Ink, that can only display black or white for each pixel. By turning pixels on and off quickly a third color, gray, can be created.

Includes Grayscale support for 1, 2, 4 and 8 bit Currently we only can support 1 and 2 bit for size And must be created without compression (not enough ram to decompress).

By turning pixels on and off very fast, the apparent average makes the pixel look gray. Unfortunately the effect can be seen on a large scale as screen flicker. By alternating consecutive pixels to opposite states ( x=0 off, x=1 on ) the effect can be minimized. Pulse width modulation is handled by switching state each pass, but anything more than 50% cycle ( on->off->on->off) is noticeable, so only 1 shade of gray works.

convert image_8bit.bmp -type Grayscale -colorspace Gray -depth 2 -define png:compression-level=0 image_2bit_nocompress.png

convert image_2bit.png -type Grayscale -colorspace Gray -depth 2 -define png:compression-level=0 image_2bit_nocompress.png

Under Image->Mode->Grayscale Under Colors->Posterize Choose 3 levels Export to PNG with compression=0 Still need to convert using imagemagic for 2-bit depth

To improve image before posterize, use Colors->Brightness_&_Contrast and slide contrast until image is closer to 3 colors, using brightness slider to get more favorable results.