michaing / dietpi Goto Github PK
View Code? Open in Web Editor NEWLightweight justice for your single-board computer!
Home Page: https://dietpi.com/
License: GNU General Public License v2.0
Lightweight justice for your single-board computer!
Home Page: https://dietpi.com/
License: GNU General Public License v2.0
http://fuzon.co.uk/phpbb/viewtopic.php?f=9&t=35&p=200#p197
Notes:
Is it's save to dist-upgrade to debian jessie?!?
And when will this project switched to jessie?
NB: prevents brute-force attacks by banning IP address
I can't connect to my RPI2 dietpi V97 deluge with my Windows 10 deluge client.
When I configure the client, the deamon appear not start
I can connect to the webui
For headless and networkless setup. Connecting to the UART pins on the GPIO headers with a bridge allows you to read the boot log, but actually logging in and using it as a terminal requires some tweaking.
I believe I was able to do this in v61 by changing cmdline.txt to:
dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 elevator=deadline root=/dev/mmcblk0p2 init=/bin/systemd rootfstype=ext4 rootwait
And uncommenting the last line in inittab.
This results in additional startup text that may not be desirable, so there might be a better way of doing this.
Additionally, I was not able to get this working with v81, so either something change, or I have forgotten a step.
When I reboot Dietpi it returns to two subsonic processes showing in htop (which causes jetty to fail - I get a 503 error when trying to connect to the web interface) seems I have to kill both of them and do 'service subsonic start' to get it going properly.
Also I think the minimum memory size you've allocated in subsonic_args is a little too small as I was getting audio dropouts even in Jukebox mode (with no transcoding) - I've increased mine to 350 and it's smooth now, that may be overkill but I would suggest bumping it back up to maybe 150?
If the locale is set to de-de-UTF8 in the config dialog prior to setting up a static network address, there are erroneous strings prepended to the ip address and mask, i.e. instead of
192.168.0.1
the installer writes
Adresse:192.168.0.1
into /etc/network/interfaces
lightweight Mailserver such as nullmailer
http://fuzon.co.uk/phpbb/viewtopic.php?f=9&t=88postfix dovecot plus webmail
https://www.raspberrypi.org/forums/viewtopic.php?p=824649#p824649
I think all text menu is some kind of strange in usage flow...
The usage is a little "unnaturally"... From the sequential arrangement...
Hi Fourdee,
Since about a week it seems not possible anymore to run the dietpi update script on my rpi2.
I'm able to ping the host so it doesn't seem like a local network issue.
D I E T - P I | 05:43 | Sun 07/12/2015 ─────────────────────────────────────── V75 | Raspberry Pi 2 (1GB) ─────────────────────────────────────── DietPi-Update: Checking for DietPi updates, Please wait... --2015-07-12 05:43:02-- https://raw.githubusercontent.com/Fourdee/DietPi//dietpi/server_version Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 23.235.43.133 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|23.235.43.133|:443... connected.
HTTP request sent, awaiting response... 404 Not Found 2015-07-12 05:43:06 ERROR 404: Not Found. root@rpi2:~#
Kind regards,
Ronald
Hello,
ive freshly installed dietpi - its amazing. But if i reboot, apache2, munin... and others arent starting.
i have manually start them. Is this coused by the fact, that the logs are at the ram?
Is it possible to set a "slowdown" for the services, after all system tasks has been loaded?
Greetings.
http://fuzon.co.uk/phpbb/viewtopic.php?f=9&t=55&p=201#p201
Using webiopi-passwd to change password prevents future logins.
I am trying to install DietPi behind a proxy. So far I did the following:
At this point, apt-get update is working from the command line. However, the installer hangs with the message "Waiting for apt-get update to finish: Please wait ..."
Still the same problem.
Regards, Marc
To reproduce:
Connected via SSH, no connection to the outside world.
Hitting "Test network" in the network config menu results in this:
cat: /DietPi/dietpi/.installed: No such file or directory
/DietPi/dietpi/dietpi-config: line 1332: ((: == 2 : syntax error: operand expected (error token is "== 2 ")
cat: /DietPi/dietpi/.installed: No such file or directory
/DietPi/dietpi/dietpi-config: line 1352: ((: == 2 : syntax error: operand expected (error token is "== 2 ")
cat: /DietPi/dietpi/.installed: No such file or directory
/DietPi/dietpi/dietpi-config: line 1369: ((: == 2 : syntax error: operand expected (error token is "== 2 ")
Testing connection to http://mirrordirector.raspbian.org, please wait.....
Minor issue, doesn't seem to negatively impact anything.
Since the last Update, suddenly i got a kernel panic.
I cant connect via SSH.
Via HDMI, there only Shows the Kernel Panic message...
I got a clone from the SDCARD. If you want, i can upload it to any Hoster.
All my Datas are lost, im little bit angry...
Greetings.
Initial report
https://www.raspberrypi.org/forums/viewtopic.php?p=809287#p809287
My results
https://www.raspberrypi.org/forums/viewtopic.php?p=809932#p809932
Further test results
https://www.raspberrypi.org/forums/viewtopic.php?p=811954#p811954
LMS Forum
The first start (after some reboots) will end in:
So i answer the questions like which software to install...
Then i use dietpi-config and configurate everything... But then it will reboot, so that changes are made...
But then i'm back on the same "select software" GUI... and my answers (made before) are gone and i must select my software again...
that is confusing ;)
the default root password is "raspberry"... Nice. But on german keyboard with "english" layout you have to remember that "y" is under "z" key...
so, maybe it is a better idea to change the default to something else or set the keyboard layout before first login is needed...
DietPi : Bug Report
08-10-2015
Email address = HIDDEN
Name = Lloyd
Transmission daemon 403 unauthorized.
When does the issue occur?
transmission is returning 403 on web ui. whitelist is disabled.
transmission doesnt appear to be actually using settings.json
Hi,
Thanks for your work on DietPi for the C1. I was wondering if there were any plans for an Odroid XU3/XU4 release.
Best,
MZ
Just testing the new Jessie image, it seems that upstream have removed ffmpeg (replaced with libav - which doesn't seem to be a 'diet' solutions...)
Hello, your work is amazing!
I have one question. Is it possible to upgrade with safety dist from Wheezy to Jessie on clear installation, after first run?
Currently only supports swapfile want to support zram-swap
see https://www.raspberrypi.org/forums/viewtopic.php?t=19255&p=189838
I run the dietpi-update command and everything works and it tells me to reboot but once I reboot it displays v94 and that there is a new update
While booting a DietPi+WebServer (version 57 on Pi type B), the apache2 server seems to be started before ramlog:
`[FAIL] Starting ramlog-tmpfs 2.0Error: /var/log is in use... failed!
The list of open files: (You need to close below daemons if you want to start/stop ramlog manually)
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
apache2 1688 root 2w REG 179,2 1751 135108 /var/log/apache2/error.log
apache2 1688 root 6w REG 179,2 0 135109 /var/log/apache2/other_vhosts_access.log
apache2 1688 root 7w REG 179,2 1935 135107 /var/log/apache2/access.log
apache2 1746 www-data 2w REG 179,2 1751 135108 /var/log/apache2/error.log
apache2 1746 www-data 6w REG 179,2 0 135109 /var/log/apache2/other_vhosts_access.log
apache2 1746 www-data 7w REG 179,2 1935 135107 /var/log/apache2/access.log
Test result: ramlog cannot be started or stopped at the moment.
Please consider adding Nginx 1.8 not LEMP stack (latest stable) install option, and Redis 3.0.X (repo has old 2.4 option).
Btw. I have few sketches of design, so next week I'll add them inside design issue.
Rewrite installation to install latest version 6.0.9
http://fuzon.co.uk/phpbb/viewtopic.php?f=9&t=87&p=300#p300
Hello,
congratulations for creating this awesome distro! I'm using it in my company with Rpi2.
I want to help you with:
So I have some questions:
This wifi module has linux drivers from the manufacturer. I attempted to download and compile them, but it's not clear to me where to get the correct linux-headers
from. There doesn't seem to be a package available.
I am running DietPi V98, and have done rpi-update
to get the latest firmware.
root@benchpi:~# uname -a
Linux benchpi 4.1.11+ #822 PREEMPT Fri Oct 23 16:14:56 BST 2015 armv6l GNU/Linux
My first priority would be to figure out how to compile these drivers. Afterwards it would be nice to have them included in DietPi for others' benefit.
This error suddenly appears + segmentation fault at apt-get....
i think i switch to a stable version of the raspberry os
Is tehre something wrong with the drivers for this device?
I connect it to my Pi, fresh DietPi v94 Jessie install, no optimized software.
dmesg gives me this:
[ 323.845154] usb 1-1.4: new high-speed USB device number 8 using dwc_otg
[ 323.956490] usb 1-1.4: New USB device found, idVendor=148f, idProduct=7601
[ 323.956514] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 323.956531] usb 1-1.4: Product: 802.11 n WLAN
[ 323.956546] usb 1-1.4: Manufacturer: MediaTek
[ 323.956562] usb 1-1.4: SerialNumber: 1.0
[ 324.035135] usb 1-1.4: reset high-speed USB device number 8 using dwc_otg
[ 324.138207] mt7601u 1-1.4:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 324.139714] mt7601u 1-1.4:1.0: Direct firmware load for mt7601u.bin failed with error -2
[ 324.140411] mt7601u: probe of 1-1.4:1.0 failed with error -2
I copied that file mt7601u.bin
from the official Raspbian to /lib/firmware
and then it worked:
[ 32.405209] usb 1-1.4: new high-speed USB device number 5 using dwc_otg
[ 32.516566] usb 1-1.4: New USB device found, idVendor=148f, idProduct=7601
[ 32.516589] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 32.516606] usb 1-1.4: Product: 802.11 n WLAN
[ 32.516622] usb 1-1.4: Manufacturer: MediaTek
[ 32.516638] usb 1-1.4: SerialNumber: 1.0
[ 32.612980] cfg80211: Calling CRDA to update world regulatory domain
[ 32.795214] usb 1-1.4: reset high-speed USB device number 5 using dwc_otg
[ 32.898218] mt7601u 1-1.4:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 32.906620] mt7601u 1-1.4:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[ 33.306414] mt7601u 1-1.4:1.0: Warning: unsupported EEPROM version 0d
[ 33.306438] mt7601u 1-1.4:1.0: EEPROM ver:0d fae:00
[ 33.558164] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 33.559898] usbcore: registered new interface driver mt7601u
Is it supposed to work like this?
Going into setup and "Language and Regional Options" and choosing
Keyboard, the next menu do not appear, and i end back in "Language
and regional options"Get this error twice
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
Lighttpd + SQLite + PHP5
http://fuzon.co.uk/phpbb/viewtopic.php?f=9&t=88
Hello Daniel,
I use DietPi and it's works very good, many thanks for your work.
Could you add HAPROXY software ?
It's very good load balancer and reverse proxy :). I have best options to compile from source for a Rpi, I can sent to you if you need ;).
Thank you,
Jerome
The dietpi-banner is clearing the screen, making the startup sequence hard to debug
$ cat /DietPi/config.txt
This file has been moved to DietPi-Ramdisk.
New location = /DietPi/config.txt
NB: to replace unsupported Raspcontrol for RPi - Jessie.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.