• CIC Prefix : LTEIOT2
• Author : Katarina Perendic
• Verison : 1.0.0
• Date : maj 2018.

We provide a library for the LTE_IoT2 Click on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Library Description

Library carries generic command parser adopted for AT command based modules. Generic parser

Key functions :

• lteiot2_cmdSingle - Sends provided command to the module
• lteiot2_setHandler - Handler assignation to the provied command
• lteiot2_modulePower - Turn on module

Examples Description

The application is composed of three sections :

• System Initialization - Initializes all necessary GPIO pins, UART used for the communcation with LTE IOT 2 module and UART used for infromation logging
• Application Initialization - Initializes driver, power on module and sends few command for the default module configuration
• Application Task - Sends message to Quectel NB-IoT test server(bit.ly/quectel-udp-server) every 5 sec.

This code snippet shows how generic parser should be properly initialized. Before intialization module must be turned on and additionaly to that hardware flow control should be also

Commands :

• Command: ATI, product information
• Command: AT+IPR=115200;&W, set baudrate
• Command: AT+QCFG="nbsibscramble",0, Enable scrambling
• Command: AT+QCFG="band",0,0,80,1, set baud
• Command: AT+QCFG="nwscanmode",3,1, Set LTE mode
• Command: AT+QCFG="nwscanseq",030201,1, set priority NB1 > M1 > 2G
• Command: AT+QCFG="iotopmode",1,1, select CAT-NB1
• Command: AT+QCFG="servicedomain",1,1, Set PS domain
• Command: AT+CGDCONT=1,"IP","internet", set APN provided
• Command: AT+CFUN=1, Full functionality
• Command: AT+COPS=1,2,"22001",0, set MCC and MNC provided
• Command: AT+QIACT=1, activate PDP context
• Command: AT+QIOPEN=1,0,"UDP","79.114.83.116",16666, create an UDP socket
• Command: AT+QISENDEX=0,"48656C6C6F", Send message - Hello

// MODULE POWER ON
    lteiot2_hfcEnable( true );
    lteiot2_modulePower( true );

// MODULE INIT
    lteiot2_cmdSingle( &ATI[0] );
    lteiot2_cmdSingle( &AT_IPR[0] );
    lteiot2_cmdSingle( &AT_QCFG_1[0] );
    lteiot2_cmdSingle( &AT_QCFG_2[0] );
    lteiot2_cmdSingle( &AT_QCFG_3[0] );
    lteiot2_cmdSingle( &AT_QCFG_4[0] );
    lteiot2_cmdSingle( &AT_QCFG_5[0] );
    lteiot2_cmdSingle( &AT_QCFG_6[0] );
    lteiot2_cmdSingle( &AT_CGDCONT[0] );
    lteiot2_cmdSingle( &AT_CFUN[0] );
    lteiot2_cmdSingle( &AT_COPS[0] );
    lteiot2_cmdSingle( &AT_CGATT[0] );
    lteiot2_cmdSingle( &AT_CEREG[0] );
    lteiot2_cmdSingle( &AT_QIACT[0] );
    lteiot2_cmdSingle( &AT_QIOPEN[0] );
    lteiot2_cmdSingle( &AT_QISENDEX[0] );

Alongside with the demo application timer initialization functions are provided. Note that timer is configured acording to default develoment system and MCUs, changing the system or MCU may require update of timer init and timer ISR functions.

The full application code, and ready to use projects can be found on our LibStock page.

Other mikroE Libraries used in the example:

• String
• Conversion

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.