test_bench.py: Snappy tests fail about cramjam HOT 7 CLOSED

No problem at all. v2.3.2 is made and should be on PyPI shortly

from cramjam.

Please disregard the previous log, it was build without python-snappy. Here is a corrected one: https://gist.github.com/veprbl/288bc21cede2c2aa676362ff0e033e0b

from cramjam.

The log is quite hard to read, but are you attempting to reverse cramjam.snappy.compress with decompress_raw_into? The pairings are

• compress_raw/decompress_raw[_into]
• compress/decompress[_into] (also known as the "framed" format in some places)

from cramjam.

Reproduced in https://github.com/milesgranger/pyrus-cramjam/runs/2707922230?check_suite_focus=true

from cramjam.

Thanks for the report, my mistake of creating some bad logic in the test, but @messense nailed it.
Don't hesitate to report back should you run into any other issues!

from cramjam.

@veprbl do you want a new release (2.3.2) for this change? I see your PR there is pulling from PyPI.

from cramjam.

@messense @milesgranger Thank you for the quick resolution! We certainly would not mind a release if that's not an inconvenience for you. Otherwise, we can pull in the relevant commits.

from cramjam.