miltanchoudhury / dense3dcrf Goto Github PK
View Code? Open in Web Editor NEWThis project forked from deepmedic/dense3dcrf
Fully-connected (dense) 3D CRF for processing biomedical scans
License: Other
This project forked from deepmedic/dense3dcrf
Fully-connected (dense) 3D CRF for processing biomedical scans
License: Other
# Author: Konstantinos Kamnitsas ([email protected]) # last modified: 27/May/2016 # This is a 3D Fully Connected CRF, made for easily processing 3D Volumetric scans. The method is highly efficient, capable of processing a mono-modal brain scan in under a minute, and multi-modal scans in 2-3 minutes, when run on the CPU. # The original CRF of Krähenbühl and Koltun (website: http://www.philkr.net/home/densecrf) was extended to 3D, for the processing of 3D volumetric scans. # The ITK library was integrated for the loading/saving of NIFTI files. # This 3D CRF can process multi-modal NIFTI scans, if it is given unary potentials (probability maps) for the classes. # It is capable of multi-class problems. # This version of the CRF for application on biomedical 3D volumes was developed and used for our works : # [1] Kamnitsas et al in "Efficient Multi-Scale 3D CNN with Fully Connected CRF for Accurate Brain Lesion Segmentation", arXiv preprint, arXiv:1603.05959, 2016. # [2] Kamnitsas et al in "Multi-Scale 3D Convolutional Neural Networks for Lesion Segmentation in Brain MRI", in Proceeding of ISLES challenge, MICCAI, 2015, winning submission. # If you are using this software, please cite the amazing work of Krähenbühl and Koltun, on which this project was based: # [3] Philipp Krähenbühl and Vladlen Koltun, "Efficient inference in fully connected crfs with gaussian edge potentials", in NIPS, 2011. # If you find this software helps you in your research, also consider citing our work [1], where the first successful application of this 3D version of the CRF on biomedical data was presented. # *********** License ************ # This software is licensed under the BSD license. A copy of the license is provided at the top of each source file. # The data provided for the accompanying examples are released under Open Database License (ODbL). Copy of the license can be found along with the data files. # *********** How to build it ************ # Requires CMake and ITK (https://itk.org/). # > "mkdir build" in the main folder. # > "cd build" # > "cmake .." # > "make" # The binary "dense3DCrfInferenceOnNiis" should now be in the /build/applicationAndExamples/ folder, which is the main application. # ************ How to run it *********** # Application can be run either # a) with a config file: use option "-c" followed by the config-file. # b) by passing all following input parameters straight from the command line. But the parameters are many, so config file is highly suggested. # As an example, from within the "build" folder run: ./applicationAndExamples/dense3DCrfInferenceOnNiis -c ../applicationAndExamples/example/configFileDenseCrf3d.txt # Results should appear in the applicationAndExamples/example/results/ folder. # As a template config file, this very readme file can be used. Below, is the explanation of all the parameters... # ************ Requirements for running the 3D CRF ************** # - All the channels (modalities) should have the same image-dimension and size, and co-registered in image space. # - Positional and bilateral std should be positives. # - Currently can process up to 5 modalities. Easily extendable to more (see src/densecrf.cpp). # - The various channels should be normalised to the same intensity range. A min and max intensity range is required to be given. Values below or above this will be set to the boundary value. # - Some care when filling this config file! See notes below! # - The arguments for each option should be given in separate, sequential lines. No empty lines or comments between an option and its corresponding value, or my custom parser breaks! # - A few minutes waiting time, for the inference :) # - The method has quite some parameters to configure. Manual configuration or grid/random search is common practice. Hopefully we ll update it with a learning method soon. # IMPORTANT NOTE: The -option and the corresponding values should be placed in sequential lines currently. No white lines or comments between. #-------BELOW ARE THE CONFIG FILE PARAMETERS TO RUN THE 3D CRF INFERENCE. This whole README file can be used as a config file! ------ #-------------------- INPUT PARAMETERS -------------------- # numberOfModalitiesAndFiles: (int) number of modalities to use, followed by the full paths-filenames of the corresponding Nifti (or nii.gz) files. -numberOfModalitiesAndFiles 2 ../applicationAndExamples/example/DWI_normalized.nii.gz ../applicationAndExamples/example/Flair_normalized.nii.gz # numberOfForegroundClassesAndProbMapFiles: (int) number of FOREGROUND classes, followed by full paths-filenames to the corresponding probability maps. # The prob-maps will be used for unary potentials! -numberOfForegroundClassesAndProbMapFiles 1 ../applicationAndExamples/example/lesionProbMap.nii.gz # imageDimensions: (int) the dimensions of the image (2 for 2D, 3 for 3D) # (TODO: This version should work for 2D too. But there is a bug in my config-parser that will not allow it >.< Will fix soon! So keep first value == 3 for 3D now!) # This should be followed by the dimension of the image in the corresponding R-C-Z axes (everything in separate lines, my config-file-parser is bad!) -imageDimensions 3 230 230 154 # minMaxIntensities: (float) min intensity, and followed by max intensity (in separate lines). # All the channels (modalities) should have already been normalised to the same intensity range. The min and max values to use should be given here. # Every value below or above these boundaries will be set the to min/max respectively. -minMaxIntensities -3.1 +3.1 #-------------------- OUTPUT PARAMETERS -------------------- # outputFolder: output folder, where the results should be saved (segmentation maps and probability maps generated by the CRF). NOTE: Folder should have been created beforehand! -outputFolder ../applicationAndExamples/example/results/ # prefixForOutputSegmentationMap: Essentially the filename for the resulting segmentation map (default is denseCrf3dOutputSegm). Will be saved as a .nii.gz automatically. -prefixForOutputSegmentationMap denseCrf3dSegmMap # prefixForOutputProbabilityMaps: Prefix of the filenames with which to save the resulting probability maps (default is denseCrf3dProbMapClass). # Each probability map will be saved as "prefix" + numberOfClass + ".nii.gz" automatically. -prefixForOutputProbabilityMaps denseCrf3dProbMapClass #------------------- HERE ARE THE CRF PARAMETERS---------------------- # pRCZandW: please provide 4 sequential floats (separate lines) for pR, pC, pZ, pW. # positional-std parameters and the corresponding weight. The higher the stds, the larger the neighbourhood that the pixel is influenced by the nearby pixel-labels. # Similary, higher positional-W means the energy function will require nearby voxels to have consistent labels. -pRCZandW 3.0 3.0 3.0 3.0 # bRCZandW: please provide 4 floats (separate lines) for bR, bC, bZ, bW. # bilateral-std parameters (bRCZ) and the corresponding weight (bW). bilateral RCZ are similar to the positional RCZ parameters. # But these contribute to the hybrid kernel, that is also influenced by the intensities in the images (-bMods section below). See original paper for more details. # bW the bilateral weight that defines the influence of the hybrid kernel (distance of pixel + intensity difference). # (Note: Imagine this as defining how far away from a pixel we require the intensities in the values to be rather homogeneous. bW values used were between 3-30, depends on number of modalities used too.) -bRCZandW 17.0 12.0 10.0 5.0 # bMods: as many floats as the channels (modalities) used (in separate sequential lines). # These bilateral stds define how much intensity-homogeneity is required within a region. # Higher values allow greater variations in the corresponding channel under the same label. -bMods 4.5 3.5 # numberOfIterations: How many times the CRF regularisation will be iteratively performed. Common choices are 5-10. But it is worth some experimentation for faster inference. -numberOfIterations 2
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.