I have a Netgear R9000 router and tried updating to the latest version (06-19-2024-r56941), but the router somehow bricks. Wireless networks wont start and several lights wont come on (probably because services aren't starting correct). Trying to reboot and do several resets (5-7) magically makes the wifi work but reset the whole router back with default dd-wrt settings. I assumed downgrading to earlier firmware would give more stability, but I experience the problems with several releases such as:
Somehow I got the 05-02-2024-r56182 to make it work.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux (LTO) version 4.9.337-rt197 (root@server2) (gcc version 14.1.0 (OpenWrt GCC 14.1.0 r26085-2aa6c875f8) ) #744 SMP Wed Jun 5 03:00:10 +07 2024
[ 0.000000] CPU: ARMv7 Processor [412fc0f4] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Annapurna Labs Alpine Dev Board
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0a2f340, node_mem_map ef7f8000
[ 0.000000] Normal zone: 1536 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 12 pages/cpu s20108 r8192 d20852 u49152
[ 0.000000] pcpu-alloc: s20108 r8192 d20852 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608
[ 0.000000] Kernel command line: root=/dev/mtdblock5 rootfstype=squashfs ubi.mtd=netgear pci=pcie_bus_perf console=ttyS0,115200
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1028456K/1048576K available (7168K kernel code, 195K rwdata, 664K rodata, 1024K init, 390K bss, 20120K reserved, 0K cma-reserved, 262144K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
[ 0.000000] .data : 0xc0a00000 - 0xc0a30e48 ( 196 kB)
[ 0.000000] .bss : 0xc0a32000 - 0xc0a93a79 ( 391 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] Registering 64 msixs, starting at 96
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
[ 0.000009] Switching to timer-based delay loop, resolution 20ns
[ 0.000064] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5096694524 ns
[ 0.000074] sched_clock: 32 bits at 375MHz, resolution 2ns, wraps every 5726622718ns
[ 0.000180] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
[ 0.000189] pid_max: default: 32768 minimum: 301
[ 0.000243] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000249] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000534] CPU: Testing write buffer coherency: ok
[ 0.000671] CPU0: update cpu_capacity 1024
[ 0.000677] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.000851] Setting up static identity map for 0x100000 - 0x100060
[ 0.001615] CPU1: update cpu_capacity 1024
[ 0.001619] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.002029] CPU2: update cpu_capacity 1024
[ 0.002033] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.002436] CPU3: update cpu_capacity 1024
[ 0.002439] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.002496] Brought up 4 CPUs
[ 0.002510] SMP: Total of 4 processors activated (400.00 BogoMIPS).
[ 0.002514] CPU: All CPU(s) started in HYP mode.
[ 0.002518] CPU: Virtualization extensions available.
[ 0.006265] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.006276] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.006853] NET: Registered protocol family 16
[ 0.006879] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.006981] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.007658] cpuidle: using governor ladder
[ 0.007689] Initializing System Fabric
[ 0.007719] Enabling IO Cache Coherency.
[ 0.011579] OF: amba_device_add() failed (-2) for /soc/timer1
[ 0.013043] msi override pcie-internal
[ 0.013133] msi override pcie-external0
[ 0.013221] msi override pcie-external1
[ 0.013309] msi override pcie-external2
[ 0.013990] Serial: AMBA PL011 UART driver
[ 0.018025] pps_core: LinuxPPS API ver. 1 registered
[ 0.018032] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.018044] PTP clock support registered
[ 0.018064] EDAC MC: Ver: 3.0.0
[ 0.018701] clocksource: Switched to clocksource arch_sys_counter
[ 0.019326] NET: Registered protocol family 2
[ 0.019407] IP idents hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019892] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.019929] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.020017] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.020047] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.020067] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.020158] NET: Registered protocol family 1
[ 0.020178] PCI: CLS 0 bytes, default 64
[ 0.021345] msi override pcie-internal
[ 0.021413] al-pcie soc:pcie-internal: PCI host bridge to bus 0000:00
[ 0.021421] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfeffffff]
[ 0.021428] pci_bus 0000:00: root bus resource [bus 00]
[ 0.021434] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 0.021451] pci 0000:00:00.0: [1c36:0002] type 00 class 0x020000
[ 0.021468] pci 0000:00:00.0: reg 0x10: [mem 0xfe000000-0xfe01ffff 64bit]
[ 0.021478] pci 0000:00:00.0: reg 0x18: [mem 0xfe020000-0xfe020fff 64bit]
[ 0.021487] pci 0000:00:00.0: reg 0x20: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.021508] pci 0000:00:00.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 0.021539] pci 0000:00:00.0: PME# supported from D3hot D3cold
[ 0.021557] pci 0000:00:00.0: reg 0x324: [mem 0x00000000-0x0001ffff 64bit]
[ 0.021563] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0005ffff 64bit] (contains BAR0 for 3 VFs)
[ 0.021726] pci 0000:00:01.0: [1c36:0001] type 00 class 0x020000
[ 0.021739] pci 0000:00:01.0: reg 0x10: [mem 0xfe040000-0xfe05ffff 64bit]
[ 0.021749] pci 0000:00:01.0: reg 0x18: [mem 0xfe060000-0xfe060fff 64bit]
[ 0.021758] pci 0000:00:01.0: reg 0x20: [mem 0xfe064000-0xfe067fff 64bit]
[ 0.021778] pci 0000:00:01.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 0.021802] pci 0000:00:01.0: PME# supported from D3hot D3cold
[ 0.021958] pci 0000:00:03.0: [1c36:0001] type 00 class 0x020000
[ 0.021972] pci 0000:00:03.0: reg 0x10: [mem 0xfe080000-0xfe09ffff 64bit]
[ 0.021982] pci 0000:00:03.0: reg 0x18: [mem 0xfe0a0000-0xfe0a0fff 64bit]
[ 0.021991] pci 0000:00:03.0: reg 0x20: [mem 0xfe0a4000-0xfe0a7fff 64bit]
[ 0.022010] pci 0000:00:03.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 0.022035] pci 0000:00:03.0: PME# supported from D3hot D3cold
[ 0.022166] pci 0000:00:04.0: [1c36:0011] type 00 class 0x100000
[ 0.022179] pci 0000:00:04.0: reg 0x10: [mem 0xfe0c0000-0xfe0dffff 64bit]
[ 0.022192] pci 0000:00:04.0: reg 0x20: [mem 0xfe0e0000-0xfe0e1fff 64bit]
[ 0.022211] pci 0000:00:04.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 0.022237] pci 0000:00:04.0: PME# supported from D3hot D3cold
[ 0.022253] pci 0000:00:04.0: reg 0x324: [mem 0x00000000-0x0001ffff 64bit]
[ 0.022258] pci 0000:00:04.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 1 VFs)
[ 0.022407] pci 0000:00:05.0: [1c36:0021] type 00 class 0x088000
[ 0.022420] pci 0000:00:05.0: reg 0x10: [mem 0xfe100000-0xfe11ffff 64bit]
[ 0.022433] pci 0000:00:05.0: reg 0x20: [mem 0xfe120000-0xfe121fff 64bit]
[ 0.022464] pci 0000:00:05.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 0.022489] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.022506] pci 0000:00:05.0: reg 0x324: [mem 0x00000000-0x0001ffff 64bit]
[ 0.022511] pci 0000:00:05.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 1 VFs)
[ 0.023245] PCI: bus0: Fast back to back transfers disabled
[ 0.023267] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
[ 0.023286] pci 0000:00:01.0: of_irq_parse_pci() failed with rc=-22
[ 0.023304] pci 0000:00:03.0: of_irq_parse_pci() failed with rc=-22
[ 0.023322] pci 0000:00:04.0: of_irq_parse_pci() failed with rc=-22
[ 0.023339] pci 0000:00:05.0: of_irq_parse_pci() failed with rc=-22
[ 0.023356] pci 0000:00:00.0: BAR 0: assigned [mem 0xfe000000-0xfe01ffff 64bit]
[ 0.023366] pci 0000:00:00.0: BAR 7: assigned [mem 0xfe020000-0xfe07ffff 64bit]
[ 0.023375] pci 0000:00:01.0: BAR 0: assigned [mem 0xfe080000-0xfe09ffff 64bit]
[ 0.023385] pci 0000:00:03.0: BAR 0: assigned [mem 0xfe0a0000-0xfe0bffff 64bit]
[ 0.023395] pci 0000:00:04.0: BAR 0: assigned [mem 0xfe0c0000-0xfe0dffff 64bit]
[ 0.023405] pci 0000:00:04.0: BAR 7: assigned [mem 0xfe0e0000-0xfe0fffff 64bit]
[ 0.023413] pci 0000:00:05.0: BAR 0: assigned [mem 0xfe100000-0xfe11ffff 64bit]
[ 0.023422] pci 0000:00:05.0: BAR 7: assigned [mem 0xfe120000-0xfe13ffff 64bit]
[ 0.023430] pci 0000:00:00.0: BAR 4: assigned [mem 0xfe140000-0xfe143fff 64bit]
[ 0.023440] pci 0000:00:01.0: BAR 4: assigned [mem 0xfe144000-0xfe147fff 64bit]
[ 0.023449] pci 0000:00:03.0: BAR 4: assigned [mem 0xfe148000-0xfe14bfff 64bit]
[ 0.023459] pci 0000:00:04.0: BAR 4: assigned [mem 0xfe14c000-0xfe14dfff 64bit]
[ 0.023469] pci 0000:00:05.0: BAR 4: assigned [mem 0xfe14e000-0xfe14ffff 64bit]
[ 0.023478] pci 0000:00:00.0: BAR 2: assigned [mem 0xfe150000-0xfe150fff 64bit]
[ 0.023488] pci 0000:00:01.0: BAR 2: assigned [mem 0xfe151000-0xfe151fff 64bit]
[ 0.023497] pci 0000:00:03.0: BAR 2: assigned [mem 0xfe152000-0xfe152fff 64bit]
[ 0.023593] PCIe 1: Link up. speed gen2 negotiated width 1
[ 0.023600] al-pcie fd800000.pcie-external0: link up: speed Gen 2 width x1
[ 0.023606] Configuring PCIE for IOCC
[ 0.023610] PCIE_1: snoop mode enable
[ 0.024651] msi override pcie-external0
[ 0.024715] al-pcie fd800000.pcie-external0: PCI host bridge to bus 0001:00
[ 0.024722] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff]
[ 0.024729] pci_bus 0001:00: root bus resource [mem 0xe0010000-0xe7ffffff]
[ 0.024735] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.024755] pci 0001:00:00.0: [1c36:0031] type 01 class 0x060400
[ 0.024771] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.024781] pci 0001:00:00.0: reg 0x14: [mem 0x00000000-0x00000fff pref]
[ 0.024809] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 0.024853] pci 0001:00:00.0: supports D1
[ 0.024858] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.025026] PCI: bus0: Fast back to back transfers disabled
[ 0.025034] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.025138] pci 0001:01:00.0: [1b21:1182] type 01 class 0x060400
[ 0.025199] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 0.025266] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.025429] PCI: bus1: Fast back to back transfers disabled
[ 0.025437] pci 0001:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.025556] pci 0001:02:03.0: [1b21:1182] type 01 class 0x060400
[ 0.025621] pci 0001:02:03.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 0.025686] pci 0001:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.025854] pci 0001:02:07.0: [1b21:1182] type 01 class 0x060400
[ 0.025920] pci 0001:02:07.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 0.025984] pci 0001:02:07.0: PME# supported from D0 D3hot D3cold
[ 0.026179] PCI: bus2: Fast back to back transfers disabled
[ 0.026188] pci 0001:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.026199] pci 0001:02:07.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.026324] pci 0001:03:00.0: [168c:0046] type 00 class 0x028000
[ 0.026353] pci 0001:03:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.026431] pci 0001:03:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 0.026516] pci 0001:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.026690] PCI: bus3: Fast back to back transfers disabled
[ 0.026699] pci_bus 0001:03: busn_res: [bus 03-ff] end is updated to 03
[ 0.026819] pci 0001:04:00.0: [168c:0046] type 00 class 0x028000
[ 0.026849] pci 0001:04:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.026926] pci 0001:04:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 0.027012] pci 0001:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.027185] PCI: bus4: Fast back to back transfers disabled
[ 0.027193] pci_bus 0001:04: busn_res: [bus 04-ff] end is updated to 04
[ 0.027200] pci_bus 0001:02: busn_res: [bus 02-ff] end is updated to 04
[ 0.027208] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 04
[ 0.027228] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
[ 0.027247] pci 0000:00:01.0: of_irq_parse_pci() failed with rc=-22
[ 0.027264] pci 0000:00:03.0: of_irq_parse_pci() failed with rc=-22
[ 0.027282] pci 0000:00:04.0: of_irq_parse_pci() failed with rc=-22
[ 0.027299] pci 0000:00:05.0: of_irq_parse_pci() failed with rc=-22
[ 0.027316] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.027332] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.027348] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.027363] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.027380] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.027396] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.027439] pci 0001:00:00.0: BAR 14: assigned [mem 0xe0200000-0xe05fffff]
[ 0.027447] pci 0001:00:00.0: BAR 0: assigned [mem 0xe0010000-0xe0010fff]
[ 0.027456] pci 0001:00:00.0: BAR 1: assigned [mem 0xe0011000-0xe0011fff pref]
[ 0.027465] pci 0001:01:00.0: BAR 14: assigned [mem 0xe0200000-0xe05fffff]
[ 0.027473] pci 0001:02:03.0: BAR 14: assigned [mem 0xe0200000-0xe03fffff]
[ 0.027480] pci 0001:02:07.0: BAR 14: assigned [mem 0xe0400000-0xe05fffff]
[ 0.027487] pci 0001:03:00.0: BAR 0: assigned [mem 0xe0200000-0xe03fffff 64bit]
[ 0.027504] pci 0001:02:03.0: PCI bridge to [bus 03]
[ 0.027512] pci 0001:02:03.0: bridge window [mem 0xe0200000-0xe03fffff]
[ 0.027524] pci 0001:04:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit]
[ 0.027540] pci 0001:02:07.0: PCI bridge to [bus 04]
[ 0.027548] pci 0001:02:07.0: bridge window [mem 0xe0400000-0xe05fffff]
[ 0.027558] pci 0001:01:00.0: PCI bridge to [bus 02-04]
[ 0.027566] pci 0001:01:00.0: bridge window [mem 0xe0200000-0xe05fffff]
[ 0.027575] pci 0001:00:00.0: PCI bridge to [bus 01-04]
[ 0.027583] pci 0001:00:00.0: bridge window [mem 0xe0200000-0xe05fffff]
[ 0.027599] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 256
[ 0.027615] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 256
[ 0.027632] pci 0001:02:03.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 256
[ 0.027653] pci 0001:03:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 256
[ 0.027670] pci 0001:02:07.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 256
[ 0.027690] pci 0001:04:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 256
[ 0.027771] PCIe 2: Link up. speed gen2 negotiated width 1
[ 0.027778] al-pcie fd820000.pcie-external1: link up: speed Gen 2 width x1
[ 0.027784] Configuring PCIE for IOCC
[ 0.027789] PCIE_2: snoop mode enable
[ 0.028836] msi override pcie-external1
[ 0.028905] al-pcie fd820000.pcie-external1: PCI host bridge to bus 0002:00
[ 0.028912] pci_bus 0002:00: root bus resource [io 0x20000-0x2ffff]
[ 0.028918] pci_bus 0002:00: root bus resource [mem 0xe8010000-0xefffffff]
[ 0.028924] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.028944] pci 0002:00:00.0: [1c36:0031] type 01 class 0x060400
[ 0.028960] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.028971] pci 0002:00:00.0: reg 0x14: [mem 0x00000000-0x00000fff pref]
[ 0.028998] pci 0002:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 0.029043] pci 0002:00:00.0: supports D1
[ 0.029047] pci 0002:00:00.0: PME# supported from D0 D1 D3hot
[ 0.029208] PCI: bus0: Fast back to back transfers disabled
[ 0.029216] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.029327] pci 0002:01:00.0: [1b21:1142] type 00 class 0x0c0330
[ 0.029354] pci 0002:01:00.0: reg 0x10: [mem 0xe8000000-0xe8007fff 64bit]
[ 0.029422] pci 0002:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 256
[ 0.029498] pci 0002:01:00.0: PME# supported from D3cold
[ 0.029642] PCI: bus1: Fast back to back transfers disabled
[ 0.029650] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.029671] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
[ 0.029689] pci 0000:00:01.0: of_irq_parse_pci() failed with rc=-22
[ 0.029706] pci 0000:00:03.0: of_irq_parse_pci() failed with rc=-22
[ 0.029723] pci 0000:00:04.0: of_irq_parse_pci() failed with rc=-22
[ 0.029740] pci 0000:00:05.0: of_irq_parse_pci() failed with rc=-22
[ 0.029755] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.029772] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.029787] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.029802] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.029819] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.029835] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.029849] irq: no irq domain found for /soc/pcie-external1/pcie-legacy-intc !
[ 0.029865] irq: no irq domain found for /soc/pcie-external1/pcie-legacy-intc !
[ 0.029884] pci 0002:00:00.0: BAR 14: assigned [mem 0xe8100000-0xe81fffff]
[ 0.029891] pci 0002:00:00.0: BAR 0: assigned [mem 0xe8010000-0xe8010fff]
[ 0.029900] pci 0002:00:00.0: BAR 1: assigned [mem 0xe8011000-0xe8011fff pref]
[ 0.029910] pci 0002:01:00.0: BAR 0: assigned [mem 0xe8100000-0xe8107fff 64bit]
[ 0.029925] pci 0002:00:00.0: PCI bridge to [bus 01]
[ 0.029933] pci 0002:00:00.0: bridge window [mem 0xe8100000-0xe81fffff]
[ 0.029949] pci 0002:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 256
[ 0.029968] pci 0002:01:00.0: Max Payload Size set to 256/ 512 (was 256), Max Read Rq 256
[ 0.029990] pci 0002:01:00.0: enabling device (0140 -> 0142)
[ 0.030078] PCIe 3: Link up. speed gen2 negotiated width 1
[ 0.030085] al-pcie fd840000.pcie-external2: link up: speed Gen 2 width x1
[ 0.030091] Configuring PCIE for IOCC
[ 0.030095] PCIE_3: snoop mode enable
[ 0.031138] msi override pcie-external2
[ 0.031204] al-pcie fd840000.pcie-external2: PCI host bridge to bus 0003:00
[ 0.031211] pci_bus 0003:00: root bus resource [io 0x30000-0x3ffff]
[ 0.031217] pci_bus 0003:00: root bus resource [mem 0xf0010000-0xf7ffffff]
[ 0.031223] pci_bus 0003:00: root bus resource [bus 00-ff]
[ 0.031244] pci 0003:00:00.0: [1c36:0031] type 01 class 0x060400
[ 0.031260] pci 0003:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.031271] pci 0003:00:00.0: reg 0x14: [mem 0x00000000-0x00000fff pref]
[ 0.031298] pci 0003:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 0.031343] pci 0003:00:00.0: supports D1
[ 0.031347] pci 0003:00:00.0: PME# supported from D0 D1 D3hot
[ 0.031510] PCI: bus0: Fast back to back transfers disabled
[ 0.031518] pci 0003:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.031621] pci 0003:01:00.0: [1ae9:0310] type 00 class 0x028000
[ 0.031645] pci 0003:01:00.0: reg 0x10: [mem 0xf0000000-0xf01fffff 64bit]
[ 0.031705] pci 0003:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
[ 0.031888] PCI: bus1: Fast back to back transfers disabled
[ 0.031896] pci_bus 0003:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.031916] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
[ 0.031935] pci 0000:00:01.0: of_irq_parse_pci() failed with rc=-22
[ 0.031952] pci 0000:00:03.0: of_irq_parse_pci() failed with rc=-22
[ 0.031969] pci 0000:00:04.0: of_irq_parse_pci() failed with rc=-22
[ 0.031986] pci 0000:00:05.0: of_irq_parse_pci() failed with rc=-22
[ 0.032001] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.032017] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.032032] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.032048] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.032064] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.032080] irq: no irq domain found for /soc/pcie-external0/pcie-legacy-intc !
[ 0.032094] irq: no irq domain found for /soc/pcie-external1/pcie-legacy-intc !
[ 0.032109] irq: no irq domain found for /soc/pcie-external1/pcie-legacy-intc !
[ 0.032123] irq: no irq domain found for /soc/pcie-external2/pcie-legacy-intc !
[ 0.032138] irq: no irq domain found for /soc/pcie-external2/pcie-legacy-intc !
[ 0.032156] pci 0003:00:00.0: BAR 14: assigned [mem 0xf0200000-0xf03fffff]
[ 0.032163] pci 0003:00:00.0: BAR 0: assigned [mem 0xf0010000-0xf0010fff]
[ 0.032172] pci 0003:00:00.0: BAR 1: assigned [mem 0xf0011000-0xf0011fff pref]
[ 0.032182] pci 0003:01:00.0: BAR 0: assigned [mem 0xf0200000-0xf03fffff 64bit]
[ 0.032196] pci 0003:00:00.0: PCI bridge to [bus 01]
[ 0.032204] pci 0003:00:00.0: bridge window [mem 0xf0200000-0xf03fffff]
[ 0.032220] pci 0003:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 256
[ 0.032237] pci 0003:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
[ 0.032890] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[ 0.036788] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.038547] bounce: pool size: 64 pages
[ 0.038554] io scheduler noop registered
[ 0.038559] io scheduler deadline registered (default)
[ 0.039049] pl061_gpio fd887000.gpio0: PL061 GPIO chip @0xfd887000 registered
[ 0.039398] pl061_gpio fd888000.gpio1: PL061 GPIO chip @0xfd888000 registered
[ 0.039724] pl061_gpio fd889000.gpio2: PL061 GPIO chip @0xfd889000 registered
[ 0.040050] pl061_gpio fd88a000.gpio3: PL061 GPIO chip @0xfd88a000 registered
[ 0.040378] pl061_gpio fd88b000.gpio4: PL061 GPIO chip @0xfd88b000 registered
[ 0.040707] pl061_gpio fd897000.gpio5: PL061 GPIO chip @0xfd897000 registered
[ 0.041096] pcieport 0001:01:00.0: enabling device (0140 -> 0142)
[ 0.041343] pcieport 0001:02:03.0: enabling device (0140 -> 0142)
[ 0.041587] pcieport 0001:02:07.0: enabling device (0140 -> 0142)
[ 0.042329] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.042384] aer 0002:00:00.0:pcie002: service driver aer loaded
[ 0.042433] aer 0003:00:00.0:pcie002: service driver aer loaded
[ 0.042475] pcieport 0001:00:00.0: Signaling PME through PCIe PME interrupt
[ 0.042482] pcieport 0001:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.042487] pcieport 0001:02:03.0: Signaling PME through PCIe PME interrupt
[ 0.042492] pci 0001:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.042497] pcieport 0001:02:07.0: Signaling PME through PCIe PME interrupt
[ 0.042502] pci 0001:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.042509] pcie_pme 0001:00:00.0:pcie001: service driver pcie_pme loaded
[ 0.042536] pcieport 0002:00:00.0: Signaling PME through PCIe PME interrupt
[ 0.042542] pci 0002:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.042549] pcie_pme 0002:00:00.0:pcie001: service driver pcie_pme loaded
[ 0.042574] pcieport 0003:00:00.0: Signaling PME through PCIe PME interrupt
[ 0.042580] pci 0003:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.042587] pcie_pme 0003:00:00.0:pcie001: service driver pcie_pme loaded
[ 0.042767] al_dma: Annapurna Labs DMA Driver 0.01
[ 0.159712] al_dma 0000:00:05.0: enabling device (0000 -> 0002)
[ 0.278713] pci 0000:00:05.1: [1c36:8021] type 00 class 0x088000
[ 0.278752] pci 0000:00:05.1: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
[ 0.399711] al_dma 0000:00:05.1: enabling device (0400 -> 0402)
[ 0.400520] serial8250_init
[ 0.400526] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.401320] console [ttyS0] disabled
[ 0.401341] fd883000.uart0: ttyS0 at MMIO 0xfd883000 (irq = 168, base_baud = 23437500) is a 16550A
[ 2.222271] console [ttyS0] enabled
[ 2.226004] fd884000.uart1: ttyS1 at MMIO 0xfd884000 (irq = 169, base_baud = 23437500) is a 16550A
[ 2.235390] al_nand_probe: AnnapurnaLabs nand driver
[ 2.240932] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xac
[ 2.247269] nand: Macronix MX30UF4G18AB
[ 2.251103] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.258672] oobavail 62
[ 2.261122] Total number of ECC bytes exceeded oobsize (ecc total 240, oobsize 64)
[ 2.268672] Scanning device for bad blocks
[ 2.555054] READ DNI CMDLINE!
[ 2.558015] dni_cmdline: Alpine nand flash:1920k(u-boot)ro,1152k(u-boot-env)ro,1280k(ART),1280k(ART.bak),4352k(kernel),40960k(rootfs),45312k@0x580000(linux),70144k(netgear),307200k(plex),89600k(reserve),512k(crashdump),3584k(language),1152k(nvram),1
52k(pot)
[ 2.580825] 14 cmdlinepart partitions found on MTD device Alpine nand flash
[ 2.587770] Creating 14 MTD partitions on "Alpine nand flash":
[ 2.593595] 0x000000000000-0x0000001e0000 : "u-boot"
[ 2.599035] 0x0000001e0000-0x000000300000 : "u-boot-env"
[ 2.604762] 0x000000300000-0x000000440000 : "ART"
[ 2.609919] 0x000000440000-0x000000580000 : "ART.bak"
[ 2.615399] 0x000000580000-0x0000009c0000 : "kernel"
[ 2.620833] 0x0000009c0000-0x0000031c0000 : "rootfs"
[ 2.626504] mtd: partition "rootfs" set to be root filesystem
[ 2.632411] mtd: partition "ddwrt" created automatically, ofs=2EE0000, len=2E0000
[ 2.639973] 0x000002ee0000-0x0000031c0000 : "ddwrt"
[ 2.645296] 0x000000580000-0x0000031c0000 : "linux"
[ 2.650936] 0x0000031c0000-0x000007640000 : "netgear"
[ 2.656911] 0x000007640000-0x00001a240000 : "plex"
[ 2.664297] 0x00001a240000-0x00001f9c0000 : "reserve"
[ 2.670411] 0x00001f9c0000-0x00001fa40000 : "crashdump"
[ 2.676048] 0x00001fa40000-0x00001fdc0000 : "language"
[ 2.681633] 0x00001fdc0000-0x00001fee0000 : "nvram"
[ 2.686934] 0x00001fee0000-0x000020000000 : "pot"
[ 2.692494] al_eth_drv: AnnapurnaLabs unified 1GbE and 10GbE Ethernet Driver al_eth v0.2 (Feb 18, 2013)
[ 2.701922] eth probe, board type=0
[ 2.705408] al_eth 0000:00:00.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected Yes. media 5
[ 2.720587] al_eth 0000:00:00.0 eth0: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe000000, mac addr 78:d2:94:58:6a:7f
[ 2.731497] eth probe, board type=0
[ 2.734983] al_eth 0000:00:01.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected No. media 1
[ 2.750029] al_eth 0000:00:01.0 eth1: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe080000, mac addr 78:d2:94:58:6a:7e
[ 2.760937] eth probe, board type=0
[ 2.764421] al_eth 0000:00:03.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected No. media 1
[ 2.779453] al_eth 0000:00:03.0 eth2: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe0a0000, mac addr a6:59:18:53:9c:b7
[ 2.790419] bq32k: probe of 0-0068 failed with error -5
[ 2.795656] i2c /dev entries driver
[ 2.820565] al_thermal_probe: Thermal Sensor Loaded at: 0xf08a5a00.
[ 2.826993] sp805-wdt fd88c000.wdt0: registration successful
[ 2.832714] al_mc_edac fb080000.mc: No ECC present, or ECC disabled
[ 2.839225] GACT probability NOT on
[ 2.842709] Mirror/redirect action on
[ 2.846376] Simple TC action Loaded
[ 2.850155] netem: version 1.3
[ 2.853213] u32 classifier
[ 2.855912] Performance counters on
[ 2.859746] input device check on
[ 2.863398] Actions configured
[ 2.866793] Netfilter messages via NETLINK v0.30.
[ 2.871651] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.878242] nf_conntrack_rtsp v0.7 loading
[ 2.882461] xt_time: kernel timezone is -0000
[ 2.886812] ip_set: protocol 6
[ 2.889952] gre: GRE over IPv4 demultiplexor driver
[ 2.895883] nf_nat_rtsp v0.7 loading
[ 2.899473] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.904872] NET: Registered protocol family 17
[ 2.909357] Bridge firewalling registered
[ 2.913358] 8021q: 802.1Q VLAN Support v1.8
[ 2.922543] Registering SWP/SWPB emulation handler
[ 2.927328] trying to register driver alpine
[ 2.931695] cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 2.942259] registered taskstats version 1
[ 2.947222] searching for nvram
[ 2.950377] nvram size = 1179648
[ 3.201298] found nvram at 100000
[ 3.229991] ubi0: attaching mtd8
[ 3.698478] ubi0: scanning is finished
[ 3.711155] ubi0 warning: 0xc04d7400: cannot reserve enough PEBs for bad PEB handling, reserved 38, need 80
[ 3.721699] ubi0: attached mtd8 (name "netgear", size 68 MiB)
[ 3.727432] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.734299] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.741076] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.748020] ubi0: good PEBs: 548, bad PEBs: 0, corrupted PEBs: 0
[ 3.754017] ubi0: user volume: 6, internal volumes: 1, max. volumes count: 128
[ 3.761228] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1504489638
[ 3.770344] ubi0: available PEBs: 0, total reserved PEBs: 548, PEBs reserved for bad PEB handling: 38
[ 3.779561] hctosys: unable to open rtc device (rtc0)
[ 3.779587] ubi0: background thread "ubi_bgt0d" started, PID 122
[ 3.790917] rootfs: allocate skip block area for 0x00000140 blocks with 0x02800000 bytes
[ 3.802580] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 3.810222] Freeing unused kernel memory: 1024K
[ 4.058772] random: crng init done
[ 5.530446] ART: allocate skip block area for 0x0000000A blocks with 0x00140000 bytes
[ 6.024432] ath9k: ath9k: Driver unloaded
[ 6.275194] ath10k_pci 0001:03:00.0: enabling device (0140 -> 0142)
[ 6.281835] ath10k_pci 0001:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 6.468410] ath10k_pci 0001:03:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 6.613611] ath10k_pci 0001:03:00.0: found firmware features ie (8 B)
[ 6.620058] ath10k_pci 0001:03:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 6.629963] ath10k_pci 0001:03:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 6.639183] ath10k_pci 0001:03:00.0: firmware ver 10.4-ddwrt-9984-tW-13-7768 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 eecea2d9
[ 8.960274] ath10k_pci 0001:03:00.0: boot get otp board id result 0x00040400 board_id 1 chip_id 0 ext_bid_support 1
[ 11.229302] ath10k_pci 0001:03:00.0: boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=1'
[ 11.238154] ath10k_pci 0001:03:00.0: boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=1'
[ 11.253196] ath10k_pci 0001:03:00.0: board_file api 2 bmi_id 0:1 crc32 2578b9d0
[ 11.312796] ath10k_pci 0001:03:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 0
[ 11.374876] ath10k_pci 0001:03:00.0: boot upload otp to 0x1234 len 9317
[ 14.466248] ath10k_pci 0001:03:00.0: Init Max Stations to 128
[ 14.472378] ath10k_pci 0001:03:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79fa vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000032 fw_build 0x00000000 phy_capab 0x00000001
um_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4800 high_5ghz_chan 6200 num_mem_reqs 0x00000007 min_pkt_size_enable 0x00000000
[ 14.584194] ath10k_pci 0001:03:00.0: ChipType 1100 ChipTypeID 0 BoardID 2 P 144/144 V 16 K 288 PH 464 T 346 msdu-desc: 2500 sw-crypt: 0
[ 14.596563] ath10k_pci 0001:03:00.0: free: 59316 iram: 14420 sram: 31524
[ 14.603263] ath10k_pci 0001:03:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 12:34:56:78:90:12 status 0
[ 14.645934] ath10k_pci 0001:03:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 128 raw 0 hwcrypto 1
[ 14.760738] ath10k_pci 0001:03:00.0: init channel number 281
[ 14.769525] ath10k_pci 0001:04:00.0: enabling device (0140 -> 0142)
[ 14.776137] ath10k_pci 0001:04:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 14.949844] ath10k_pci 0001:04:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 14.960539] ath10k_pci 0001:04:00.0: found firmware features ie (8 B)
[ 14.966970] ath10k_pci 0001:04:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 14.976874] ath10k_pci 0001:04:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 14.986101] ath10k_pci 0001:04:00.0: firmware ver 10.4-ddwrt-9984-tW-13-7768 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 eecea2d9
[ 17.275179] ath10k_pci 0001:04:00.0: boot get otp board id result 0x00040800 board_id 2 chip_id 0 ext_bid_support 1
[ 19.497742] ath10k_pci 0001:04:00.0: boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=2'
[ 19.506603] ath10k_pci 0001:04:00.0: boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=2'
[ 19.515875] ath10k_pci 0001:04:00.0: board_file api 2 bmi_id 0:2 crc32 2578b9d0
[ 19.575440] ath10k_pci 0001:04:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 0
[ 19.637523] ath10k_pci 0001:04:00.0: boot upload otp to 0x1234 len 9317
[ 22.728264] ath10k_pci 0001:04:00.0: Init Max Stations to 128
[ 22.734388] ath10k_pci 0001:04:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000032 fw_build 0x00000000 phy_capab 0x00000002
um_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4800 high_5ghz_chan 6200 num_mem_reqs 0x00000007 min_pkt_size_enable 0x00000000
[ 22.847601] ath10k_pci 0001:04:00.0: ChipType 1100 ChipTypeID 0 BoardID 1 P 144/144 V 16 K 288 PH 464 T 346 msdu-desc: 2500 sw-crypt: 0
[ 22.859966] ath10k_pci 0001:04:00.0: free: 59316 iram: 14420 sram: 31524
[ 22.866656] ath10k_pci 0001:04:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 00:03:7f:12:34:56 status 0
[ 22.945210] ath10k_pci 0001:04:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 128 raw 0 hwcrypto 1
[ 23.054814] ath10k_pci 0001:04:00.0: init channel number 86
[ 23.109342] wil6210 0003:01:00.0: enabling device (0140 -> 0142)
[ 23.315129] al eth open!
[ 23.317660] not exist phy!
[ 23.322771] al eth open!
[ 23.325301] not exist phy!
[ 23.328059] configured MAC to RGMII mode:
[ 23.332072] eth [al_eth_1]: set link speed to 1000Mbps. full duplex.
[ 23.339169] al_eth 0000:00:01.0 eth1: using MSI-X per Queue interrupt mode
[ 23.348963] al eth open!
[ 23.351493] not exist phy!
[ 23.354250] configured MAC to RGMII mode:
[ 23.358251] eth [al_eth_2]: set link speed to 1000Mbps. full duplex.
[ 23.365342] al_eth 0000:00:03.0 eth2: using MSI-X per Queue interrupt mode
[ 23.448047] 0-0020 supply vcc not found, using dummy regulator
[ 23.539537] ssdk_plat_init start
[ 23.542773] need alloc mdiobus now!
[ 23.546255] miibus=ee08b400
[ 23.549052] miibusslave=eeb32000
[ 23.552274] Register QCA PHY driver
[ 23.556059] PHY ID is 0x4dd036
[ 23.629302] qca probe f1 phy driver succeeded!
[ 23.634659] ssdk init for 1:1302!
[ 23.755732] qca probe f1 phy driver succeeded!
[ 23.760171] ssdk init for slave !
[ 23.763678] register_switch switch0 ok
[ 23.767422] register_switch switch1 ok
[ 25.399979] [lxx] qca phy switch reg enter
[ 25.404153] [lxx] create proc lan led
[ 25.411228] qca-ssdk module init succeeded!
[ 28.555713] device br0 entered promiscuous mode
[ 28.583522] al eth open!
[ 28.586058] not exist phy!
[ 28.597557] al eth open!
[ 28.600098] not exist phy!
[ 28.604614] br0: port 1(eth0) entered blocking state
[ 28.610964] br0: port 1(eth0) entered disabled state
[ 28.616050] device eth0 entered promiscuous mode
[ 28.642617] br0: port 2(vlan1) entered blocking state
[ 28.649055] br0: port 2(vlan1) entered disabled state
[ 28.654226] device vlan1 entered promiscuous mode
[ 28.660208] device eth1 entered promiscuous mode
[ 28.668738] br0: port 2(vlan1) entered blocking state
[ 28.674790] br0: port 2(vlan1) entered forwarding state
[ 28.680031] device br0 left promiscuous mode
[ 28.686549] device br0 entered promiscuous mode
[ 28.695733] device br0 left promiscuous mode
[ 28.753066] ART.bak: allocate skip block area for 0x0000000A blocks with 0x00140000 bytes
[ 29.994137] ath10k_pci 0001:04:00.0: Core CLK 300
[ 30.000172] ath10k_pci 0001:04:00.0: Mac CLK 150
[ 32.449664] ath10k_pci 0001:04:00.0: boot get otp board id result 0x00040800 board_id 2 chip_id 0 ext_bid_support 1
[ 34.724026] ath10k_pci 0001:04:00.0: boot upload otp to 0x1234 len 9317
[ 37.814686] ath10k_pci 0001:04:00.0: Init Max Stations to 128
[ 37.820440] ath10k_pci 0001:04:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000032 fw_build 0x00000000 phy_capab 0x00000002
um_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4800 high_5ghz_chan 6200 num_mem_reqs 0x00000007 min_pkt_size_enable 0x00000000
[ 37.933652] ath10k_pci 0001:04:00.0: ChipType 1100 ChipTypeID 0 BoardID 1 P 144/144 V 16 K 288 PH 464 T 346 msdu-desc: 2500 sw-crypt: 0
[ 37.946023] ath10k_pci 0001:04:00.0: free: 59316 iram: 14420 sram: 31524
[ 37.952732] ath10k_pci 0001:04:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 00:03:7f:12:34:56 status 0
[ 38.075342] ath10k_pci 0001:04:00.0: Init Channel Number 14
[ 38.126366] ath10k_pci 0001:04:00.0: set base mac addr 78:d2:94:58:6a:81
[ 52.587044] ath10k_pci 0001:04:00.0: boot get otp board id result 0x00040800 board_id 2 chip_id 0 ext_bid_support 1
[ 54.865043] ath10k_pci 0001:04:00.0: boot upload otp to 0x1234 len 9317
[ 57.972420] ath10k_pci 0001:04:00.0: Init Max Stations to 128
[ 57.978164] ath10k_pci 0001:04:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000032 fw_build 0x00000000 phy_capab 0x00000002
um_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4800 high_5ghz_chan 6200 num_mem_reqs 0x00000007 min_pkt_size_enable 0x00000000
[ 58.091342] ath10k_pci 0001:04:00.0: ChipType 1100 ChipTypeID 0 BoardID 1 P 144/144 V 16 K 288 PH 464 T 346 msdu-desc: 2500 sw-crypt: 0
[ 58.103735] ath10k_pci 0001:04:00.0: free: 59316 iram: 14420 sram: 31524
[ 58.110436] ath10k_pci 0001:04:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 00:03:7f:12:34:56 status 0
[ 58.236112] ath10k_pci 0001:04:00.0: Init Channel Number 14
[ 58.275493] ath10k_pci 0001:04:00.0: set base mac addr 78:d2:94:58:6a:81
[ 58.400885] ath10k_pci 0001:04:00.0: mac txpower 20
[ 58.688286] ath10k_pci 0001:04:00.0: mac txpower 20
[ 58.759668] br0: port 3(wlan1) entered blocking state
[ 58.766113] br0: port 3(wlan1) entered disabled state
[ 58.771317] device wlan1 entered promiscuous mode
[ 58.777288] br0: port 3(wlan1) entered blocking state
[ 58.782337] br0: port 3(wlan1) entered forwarding state
[ 58.824938] ath10k_pci 0001:03:00.0: Core CLK 300
[ 58.830385] ath10k_pci 0001:03:00.0: Mac CLK 150
[ 61.288072] ath10k_pci 0001:03:00.0: boot get otp board id result 0x00040400 board_id 1 chip_id 0 ext_bid_support 1
[ 63.562532] ath10k_pci 0001:03:00.0: boot upload otp to 0x1234 len 9317
[ 66.652745] ath10k_pci 0001:03:00.0: Init Max Stations to 128
[ 66.658488] ath10k_pci 0001:03:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79fa vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000032 fw_build 0x00000000 phy_capab 0x00000001
um_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4800 high_5ghz_chan 6200 num_mem_reqs 0x00000007 min_pkt_size_enable 0x00000000
[ 66.770279] ath10k_pci 0001:03:00.0: ChipType 1100 ChipTypeID 0 BoardID 2 P 144/144 V 16 K 288 PH 464 T 346 msdu-desc: 2500 sw-crypt: 0
[ 66.782650] ath10k_pci 0001:03:00.0: free: 59316 iram: 14420 sram: 31524
[ 66.789359] ath10k_pci 0001:03:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 12:34:56:78:90:12 status 0
[ 66.892828] ath10k_pci 0001:03:00.0: Init Channel Number 40
[ 66.923534] ath10k_pci 0001:03:00.0: set base mac addr 78:d2:94:58:6a:80
[ 87.702052] ath10k_pci 0001:03:00.0: boot get otp board id result 0x00040400 board_id 1 chip_id 0 ext_bid_support 1
[ 89.995510] ath10k_pci 0001:03:00.0: boot upload otp to 0x1234 len 9317
[ 93.123912] ath10k_pci 0001:03:00.0: Init Max Stations to 128
[ 93.129667] ath10k_pci 0001:03:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79fa vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000032 fw_build 0x00000000 phy_capab 0x00000001
um_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4800 high_5ghz_chan 6200 num_mem_reqs 0x00000007 min_pkt_size_enable 0x00000000
[ 93.241433] ath10k_pci 0001:03:00.0: ChipType 1100 ChipTypeID 0 BoardID 2 P 144/144 V 16 K 288 PH 464 T 346 msdu-desc: 2500 sw-crypt: 0
[ 93.253803] ath10k_pci 0001:03:00.0: free: 59316 iram: 14420 sram: 31524
[ 93.260509] ath10k_pci 0001:03:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 12:34:56:78:90:12 status 0
[ 93.363955] ath10k_pci 0001:03:00.0: Init Channel Number 40
[ 93.394573] ath10k_pci 0001:03:00.0: set base mac addr 78:d2:94:58:6a:80
[ 93.434489] br0: port 4(wlan0) entered blocking state
[ 93.439551] br0: port 4(wlan0) entered disabled state
[ 93.444790] device wlan0 entered promiscuous mode
[ 93.461196] ath10k_pci 0001:03:00.0: mac txpower 20
[ 93.732564] ath10k_pci 0001:03:00.0: mac txpower 20
[ 93.742705] br0: port 4(wlan0) entered blocking state
[ 93.747752] br0: port 4(wlan0) entered forwarding state
[ 93.804748] ath10k_pci 0001:04:00.0: Init Channel Number 14
[ 93.810871] ath10k_pci 0001:03:00.0: Init Channel Number 91
[ 94.076299] ath10k_pci 0001:04:00.0: Init Channel Number 11
[ 94.082268] ath10k_pci 0001:03:00.0: Init Channel Number 173
[ 94.100325] ath10k_pci 0001:03:00.0: Init Channel Number 40
[ 94.109491] ath10k_pci 0001:04:00.0: Init Channel Number 11
[ 94.212022] device vlan2 entered promiscuous mode
[ 94.735966] NET: Registered protocol family 10
[ 95.134256] device eth2 entered promiscuous mode
[ 95.139240] device vlan2 left promiscuous mode
[ 95.145002] device eth2 left promiscuous mode
Let me know if there is something I can do to help identify the issue.