3-phase Power Inverter Development Repository
Important Information for SELE
- The guide to use the setup is presented in Guide
- The repository to import with DAVE is present in DAVE Project
- The 3-phase 30A@450V power inverter for academic/research purposes;
- This inverter has built-in measurements of AC currents, AC voltages and DC bus voltage;
- The inverter is based on infineon IPM IKCM30F60GA module (a low-cost module, with integrated drivers);
- The control board is based on XMC4500 Relax (lite) kit, a well known board in UP Laboratory of Power Electronics;
- Reduced cost of hardware (around 100€);
- Decrease the Hardware design, by using a generic multi-purpose power inverter;
- Decrease the Testing time and increase the Validation outcomes;
- Increase in Implementation and Control capabilities, without spending too much time in this step;
- Increase in new contributions to the Scientific Comunity, with more papers.
- Define functional requirements of this project
- Create BOM for 10 boards (expecting 1000€)
- Create "how to use" manual
FOLDER |
DESCRIPTION |
comments |
1. Functional |
Documentation folder for functional requirements of this project |
|
2. Hardware PCB |
Development folder for the PCB hardware |
|
3. Design |
Documentation for the hardware design requirements and BOM |
|
4. Software_WS |
Development folder having the DAVE workspace for XMC4500 programming |
|
5. Implementation |
Documentation and simulation of the simulated models/algorithms |
|
6. Testing&Validation |
Documentation of the product testing |
|
z_junk |
folder for not-structured content |
|
├── 1. Functional
│ └── draft.docx
├── 2. Hardware PCB
│ ├── CAMtastic_controlo_rev21.Cam
│ ├── CAMtastic_controlo_rev22.Cam
│ ├── CAMtastic_inversor_rev21.Cam
│ ├── CAMtastic_inversor_rev22.Cam
│ ├── History
│ ├── PCB_controlo_rev2.zip
│ ├── PCB_inversor_rev2.zip
│ ├── __Previews
│ ├── accets
│ ├── controlo_rev2.PcbDoc
│ ├── controlo_rev2.PrjPcb
│ ├── controlo_rev2.PrjPcbStructure
│ ├── controlo_rev2.SchDoc
│ ├── debug.log
│ ├── inversor_rev2.PcbDoc
│ ├── inversor_rev2.PrjPcb
│ ├── inversor_rev2.PrjPcbStructure
│ ├── inversor_rev2.SchDoc
│ ├── vmorais_libraries.PcbLib
│ └── vmorais_libraries.SchLib
├── 3. Design
│ └── BOM.xlsx
├── 4. Software_WS
│ └── OL_VSC_vitor
├── 5. Implementation
│ └── hardware.psimsch
├── 6. Testing&Validation
│ └── testing.docx
├── README.md
├── folder_structure_binary.txt
└── z_junk
├── flowchart_procedures.png
├── flowchart_procedures.svg
├── img1.png
├── img2.jpg
└── img3.jpg