muccc / gr-iridium Goto Github PK
View Code? Open in Web Editor NEWIridium burst detector and demodulator.
gr-iridium's Issues
Problems with airspy Bandwidth...
hi, i-m trying to receive iridium data but the bandwidth that i obtain is 0... someone could help me?
root@sdr-GL552VW:~/gr-iridium# iridium-extractor -D 4 examples/airspy.conf > output.bits
gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.8.1.0
built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri hackrf bladerf rfspace airspy airspyhf soapy redpitaya freesrp
[INFO] [UHD] linux; GNU C++ version 9.2.1 20200304; Boost_107100; UHD_3.15.0.0-2build5
-- Using subdev spec '0:0'.
(RF) Gain: 21.0 (Requested 21)
Bandwidth: 0.0 (Requested 10000000)
Warning: Setting antenna to RX
1611582107 | i: 0/s | i_avg: 0/s | q: 0 | q_max: 0 | o: 0/s | ok: 0% | ok: 0/s | ok_avg: 0% | ok: 0 | ok_avg: 0/s | d: 0
[INFO] [UHDSoapyDevice] Using format CF32.
1611582108 | i: 0/s | i_avg: 0/s | q: 0 | q_max: 0 | o: 0/s | ok: 0% | ok: 0/s | ok_avg: 0% | ok: 0 | ok_avg: 0/s | d: 0
1611582109 | i: 0/s | i_avg: 0/s | q: 0 | q_max: 0 | o: 0/s | ok: 0% | ok: 0/s | ok_avg: 0% | ok: 0 | ok_avg: 0/s | d: 0
1611582110 | i: 0/s | i_avg: 0/s | q: 0 | q_max: 0 | o: 0/s | ok: 0% | ok: 0/s | ok_avg: 0% | ok: 0 | ok_avg: 0/s | d: 0
thank you very much
ppp-ethik-ascii-1621-16.cfile
plz who can help me to find this file ( ppp-ethik-ascii-1621-16.cfile ) because i didn't find it :(
USRP antenna Input is not selectable
At my USRP N210 i can not select the antenna Input.
Activation of the Bias tee in gr-iridium
Hi, I have an rtl-sdr.com v3 dongle and it works perfectly in Windows 10 when I activate the polarization tee. But in Kali Linux 2019 it is not like that, every time I run the command ./rtl_biast the biast is enabled without problems and I can check the output of the sma connector of the 4.5 volt dongle, but when I run gr-iridium it deactivates the dongle voltage and Of course, the GPS patch antenna does not work. I hope you can help me, because I am very interested in decoding the signals of the Iridium satellite system.
ImportError: No module named iridium.iridium_extractor_flowgraph
Hi there,
I have compiled the source here using the included instructions, however when I go to run "iridium_extractor" at the CLI, I get this error:
Traceback (most recent call last):
File "/usr/local/bin/iridium-extractor", line 10, in <module>
import iridium.iridium_extractor_flowgraph
ImportError: No module named iridium.iridium_extractor_flowgraph
Any ideas on why Python can't find the modules?
Thanks,
Geoff
Number of "OK" frames should be taken after duplicate suppression
Add Github topics to the repository
Hi, can you add the following topics to this repository?
- https://github.com/topics/sdr
- https://github.com/topics/gnu-radio
- https://github.com/topics/gnuradio
- https://github.com/topics/rtl-sdr
- https://github.com/topics/hackrf
- https://github.com/topics/iridium
Thanks!
Implement CI against different compiler versions
Online overflow detection
Hi!
I am using gr-iridium with hackrf (iridium-extractor -D 4 examples/hackrf.conf | grep "A:OK" > output.bits) and it works right.
Does anyone know how I can detect overflow during the online processing?
when I see "Detector in burst squelch at xxxx", first I have to check that it is not an interference, haven't I? (issue 26)
Thanks a lot in advanced.
BR
Marcus
Error in installation: GnuradioConfig.cmake missing
Hello
I am trying to install gr-iridium-master on my computer running Ubuntu 14.04.3.
In order to fix prerequisites I already installed (with the Linux package installer) Gnuradio 3.7.10 which works fine, having tested it with an SDR application.
Nevertheless when running the "cmake .." as in installation instructions I get the following error messages :
CMake Error at CMakeLists.txt:116 (find_package):
By not providing "FindGnuradio.cmake" in CMAKE_MODULE_PATH this project has
asked CMake to find a package configuration file provided by "Gnuradio",
but CMake did not find one.
Could not find a package configuration file provided by "Gnuradio"
(requested version 3.7.6) with any of the following names:
GnuradioConfig.cmake
gnuradio-config.cmake
Add the installation prefix of "Gnuradio" to CMAKE_PREFIX_PATH or set
"Gnuradio_DIR" to a directory containing one of the above files. If
"Gnuradio" provides a separate development package or SDK, be sure it has
been installed.
Actually the mentioned cmake files do not exist on my computer so I cannot manually insert the directory: any suggestion for workarounds?
Thanks. Mauro
fft_burst_tagger_impl.cc:134:34: error: expected ‘)’ before ‘PRIu64’
Just cloned current head. I'm in a Centos machine 3.10.0-327 kernel
All C++ references to using PRIu64 to format (inside fprintf, etc) get compiler failures.
My guess ... missing __STDC_FORMAT_MACROS definition somewhere. But then, when I insert that in the lib/*.cc file, the err still shows up.
- edited tagged_burst, fft_burst, and burst_downmix CC files in lib/ .... make clean && make ... still gives error on the PRIu64
- specifically defined PRIu64 as 'llu' in fft_burst*cc file, after intttypes include ... STILL fails. I'm starting to think this is NOT a 'definition' problem.
- I give up. I'm rewriting the fprintf/printf statements to simply use '%llu'
Error in '/usr/bin/python2': corrupted double-linked list 0x01292c68
Hello all, just built gr-iridium as per the instruction page. It all went well until when i try to run it, i get the error above. As i have gnuradio 3.7, i switched branch before building, but can't get it to work. I'm using a bladerf. I will keep investigating and post here if i get a solution, in the meantime would like any hint in order to get it running.
Thanks in advance!
lib/test-iridium floating point exception, fails
cloned gnuradio, current rep head -- built/installed
PYTHONPATH=/usr/local/lib64/python2.7/site-packages # - to include gnuradion python
cloned gr-iridium repo's current head -- built
make test fails
more detail from /usr/bin/ctest -VV --force-new-ctest-process command
it turns out that lib/test-iridium binary fails with floating point exception and gdb says SIGPE
Someone dividing by 0 ?
--joe
Weird Patterns in I/Q values
We are using the gr-iridium module with a USRP X310 and an ANT500 antenna in an open field environment. We are able to receive and decode some messages from time to time, thus we assume that the overall configuration is fine and properly working.
We logged the I/Q patterns from the function iridium_qpsk_demod_cpp_impl.cc(...), and specifically we are logging the values of the data structure d_burst_after_pll. We log only the values that pass the check at the lines 333-336 (valid IRIDIUM packets), and in particular, we keep only the values of the packets that are recognized as IRIDIUM Ring Alert packets after the processing with the iridium-toolkit.
By plotting the aforementioned I/Q values, we obtain Fig. 1 and (considering a 3-dimensional histogram) Fig. 2.
The constellation appears very noisy and it seems (from the 3d-histogram) that two symbols are more frequent than the others.
Should we assume this as normal? Do you have any suggestion on how to reduce the noise affecting the IQ parameters?
GR-iridium install issue
Hello guys,
I'm having this error with the cmake command
`nobsklu@nobsklu-HP-Elite-x2-1012-G1:~/Desktop/gr-iridium2/build$ cmake ..
-- Build type not specified: defaulting to release.
-- Checking for module 'mpir >= 3.0'
-- No package 'mpir' found
-- Could NOT find MPIR (missing: MPIRXX_LIBRARY MPIR_INCLUDE_DIR)
-- User set python executable /usr/bin/python3
CMake Error at CMakeLists.txt:128 (find_package):
By not providing "Findpybind11.cmake" in CMAKE_MODULE_PATH this project has
asked CMake to find a package configuration file provided by "pybind11",
but CMake did not find one.
Could not find a package configuration file provided by "pybind11" with any
of the following names:
pybind11Config.cmake
pybind11-config.cmake
Add the installation prefix of "pybind11" to CMAKE_PREFIX_PATH or set
"pybind11_DIR" to a directory containing one of the above files. If
"pybind11" provides a separate development package or SDK, be sure it has
been installed.
-- Configuring incomplete, errors occurred!
See also "/home/nobsklu/Desktop/gr-iridium2/build/CMakeFiles/CMakeOutput.log".
See also "/home/nobsklu/Desktop/gr-iridium2/build/CMakeFiles/CMakeError.log".`
Could Someone help me with this please ?
Many thanks
(Request) iridium_extractor_flowgraph with gr-soapy/sdrplay settings
I’ve noticed of course that the stock flow graph is using osmosdr. What’s interesting is that I can sort of get an rsp1a to work or at least recognized with the iridium extractor, however I think it’s impossible to pass across relevant gain settings etc.
If I open the example flow graph in the examples folder and alter the file input to that of the gr-soapy (soapy source) and change it to sdrplay in the drop down and then go and save the block each time I configure a relevant setting for sdrplay it appears to work when running the flow graph within gnuradio companion. Meaning the terminal window used to start gnuradio companion starts populating with lots of number, OK mentions, and % numbers.
I realize this is a very specific use case, but would it be possible for you to make a branch specific to soapy source/sdrplay? I suppose the ideal solution would be I just get it to work with osmosdr but I have had way better results with gr-soapy (soapy source) for sdrplay equipment with gnuradio 3.8.
ERROR on gr-iridium with gnuradio 3.10.* on run time
i just did a NEW UBUNTU-64 BIT INSTALL
and build gnuradio 3.10.* which is successful
BUT WHILE RUNNING gr-iridium
getting this error
File "/usr/local/bin/iridium-extractor", line 232, in
tb = iridium.iridium_extractor_flowgraph.FlowGraph(center_frequency=center, sample_rate=sample_rate, decimation=decimation,
File "/usr/local/lib/python3/dist-packages/iridium/iridium_extractor_flowgraph.py", line 244, in init
tb.connect(source, self._fft_burst_tagger)
File "/usr/local/lib/python3/dist-packages/gnuradio/gr/hier_block2.py", line 37, in wrapped
func(self, src, src_port, dst, dst_port)
File "/usr/local/lib/python3/dist-packages/gnuradio/gr/hier_block2.py", line 100, in connect
self.primitive_connect(*args)
TypeError: primitive_connect(): incompatible function arguments. The following argument types are supported:
1. (self: gnuradio.gr.gr_python.hier_block2_pb, block: gnuradio.gr.gr_python.basic_block) -> None
2. (self: gnuradio.gr.gr_python.hier_block2_pb, src: gnuradio.gr.gr_python.basic_block, src_port: int, dst: gnuradio.gr.gr_python.basic_block, dst_port: int) -> None
Invoked with: <gnuradio.gr.gr_python.top_block_pb object at 0x7fd45a65f170>, <Swig Object of type 'gr::basic_block_sptr *' at 0x7fd455b37180>, 0, <gnuradio.gr.gr_python.basic_block object at 0x7fd45a08b070>, 0
Tagged 0 bursts
gnuradio 3.9 breaks burst_downmix_impl reference to fft_complex
Error below, gnuradio commit gnuradio/gnuradio@eae138c added the fft_complex(const fft_complex&) = delete; line that appears to be breaking burst_downmix_impl. I'm trying to figure out how to fix this the right way, but it's not jumping out at me. Raising this issue to try and get some extra eyes on it.
Building CXX object lib/CMakeFiles/gnuradio-iridium.dir/burst_downmix_impl.cc.o
/home/user/gr-iridium/lib/burst_downmix_impl.cc: In constructor ‘gr::iridium::burst_downmix_impl::burst_downmix_impl(int, int, size_t, const std::vector<float>&, const std::vector<float>&, bool)’:
/home/user/gr-iridium/lib/burst_downmix_impl.cc:115:98: error: use of deleted function ‘gr::fft::fft_complex::fft_complex(const gr::fft::fft_complex&)’
115 | d_cfo_est_fft(fft::fft_complex(d_cfo_est_fft_size * d_fft_over_size_facor, true, 1))
| ^
In file included from /home/user/gr-iridium/lib/burst_downmix_impl.cc:28:
/opt/gnuradio/gnuradio/include/gnuradio/fft/fft.h:68:5: note: declared here
68 | fft_complex(const fft_complex&) = delete;
| ^~~~~~~~~~~
/home/user/gr-iridium/lib/burst_downmix_impl.cc: In member function ‘void gr::iridium::burst_downmix_impl::initialize_correlation_filter()’:
/home/user/gr-iridium/lib/burst_downmix_impl.cc:278:69: error: use of deleted function ‘gr::fft::fft_complex::fft_complex(const gr::fft::fft_complex&)’
278 | fft::fft_complex fft_engine = fft::fft_complex(d_corr_fft_size);
| ^
In file included from /home/user/gr-iridium/lib/burst_downmix_impl.cc:28:
/opt/gnuradio/gnuradio/include/gnuradio/fft/fft.h:68:5: note: declared here
68 | fft_complex(const fft_complex&) = delete;
| ^~~~~~~~~~~
/home/user/gr-iridium/lib/burst_downmix_impl.cc: In member function ‘virtual int gr::iridium::burst_downmix_impl::work(int, gr_vector_const_void_star&, gr_vector_void_star&)’:
/home/user/gr-iridium/lib/burst_downmix_impl.cc:741:5: warning: no return statement in function returning non-void [-Wreturn-type]
741 | }
| ^
make[2]: *** [lib/CMakeFiles/gnuradio-iridium.dir/build.make:122: lib/CMakeFiles/gnuradio-iridium.dir/burst_downmix_impl.cc.o] Error 1
make[1]: *** [CMakeFiles/Makefile2:292: lib/CMakeFiles/gnuradio-iridium.dir/all] Error 2
make: *** [Makefile:161: all] Error 2
Out-of-bounds memory access in burst downmix
The burst downmix block is affected by gnuradio/gnuradio#3393. It feeds the payload of a PDU (which might not have VOLK alignment) into filterNdec(), provoking out-of-bounds memory access at the start of the PDU payload.
I'm not aware of segfaults because of this, but it should be fixed anyway. The difference in alignment also somehow influences the floating point math (at least with the AVX kernel), creating slightly different results.
A few options:
- Copy PDU payload into VOLK aligned vector before processing it
- Perform the copy only if alignment is actually off
- Implement FIR filtering directly using a VOLK primitive which does not require alignment
- Fix this in GR 3.8 and GR 3.9
I guess number 2 and 3 are viable options. Not sure though which one has better performance (especially on ARM).
d_max_bursts calculation invalid
I was constantly getting errors about "Detector in burst squelch".
After looking through the code a bit, I think the logic for calculating d_max_bursts in fft_burst_tagger_impl is incorrect.
// Consider the signal to be invalid if more than 80%
// of all channels are in use.
d_max_bursts = (sample_rate / burst_width) * 0.8;
d_max_bursts is intended to be a count measured in FFT bins. However burst_width is measured in samples. As such, d_max_bursts actually winds up being measured in samples^2 per second instead of FFT bins.
I think the fix is to define d_max_bursts relative to d_burst_width (which is measured in FFT bins).
Airspy instead of HackRF?
I'm awaiting the arrival of a HackRF but thought I'd try with an Airspy. Since the .conf file uses 'osmo-sdr source' I thought it might work. When I enter:
iridium-extractor -D 4 examples/hackrf.conf | grep "A:OK" > output.bits
I get:
Traceback (most recent call last): File "/usr/local/bin/iridium-extractor", line 130, in <module> items = config.items("osmosdr-source") File "/usr/lib/python2.7/ConfigParser.py", line 642, in items raise NoSectionError(section) ConfigParser.NoSectionError: No section: 'osmosdr-source'
Reading output.bits file in Wireshark?
How does one prepare the raw output.bits file for Wireshark? I've had success with voice but wondering about sms as demonstrated in the CCC video?
LNA4ALL use?
Just wondering if an LNA4ALL is turned on automatically when running extractor or is there a command that could turn it on for extra amplification.
iridium-extractor No module named filter but gr-filter is installed
Running gnuradio 3.7.11.1 from ubuntu with all libs installed and dependencies. gr-iridium compiles, installs, then when run throws the below error message.
Traceback (most recent call last):
File "/usr/local/bin/iridium-extractor", line 10, in
import iridium.iridium_extractor_flowgraph
File "/usr/local/lib/python2.7/dist-packages/iridium/iridium_extractor_flowgraph.py", line 9, in
import gnuradio.filter
ImportError: No module named filter
*** Error in `/usr/bin/python2': corrupted double-linked list: 0x00cd9fe8 ***
Hi, I'm getting this error now on both my linux mint 18 build and my RPi 3 Raspbian build. The full text is: pi@raspberrypi:~/gr-iridium $ iridium-extractor -D 4 examples/rtl-sdr.conf | grep "A:OK" > output.bits
gr-osmosdr v0.1.4-98-gc653754d (0.1.5git) gnuradio 3.7.10
built-in source types: file fcd rtl rtl_tcp uhd hackrf rfspace redpitaya
*** Error in `/usr/bin/python2': corrupted double-linked list: 0x00cd9fe8 ***
shared_ptr reference don't track against gnuradio master (3.9 prep)
Not 100% sure this should go in to master, but also not sure where to put it. If possible can gr-iridium change branching to match gnuradio? add a maint-3.8/3.7 so master can track against gnuradio master?
Pull request 45 modifies the references, but may need to be rejected in favor of a repo refactor
Build error with gcc-11
I'm trying to build gr-iridium on Arch Linux (gcc-11.1.0, gnuradio-3.8.2.0), but I'm getting an error which, I suppose, is caused by the stricter requirements of gcc-11. Quite a lot of warnings & errors from doxygen, too. Also, you have not specified the python version gr-iridium needs... I assume python-3.x is OK?
Branch 'maint-3.8' set up to track remote branch 'maint-3.8' from 'origin'.
Switched to a new branch 'maint-3.8'
-- The CXX compiler identification is GNU 11.1.0
-- The C compiler identification is GNU 11.1.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Build type not specified: defaulting to release.
-- Found LOG4CPP: /usr/lib/liblog4cpp.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "1.7.3")
-- Checking for module 'gmp'
-- Found gmp, version 6.2.1
-- Found GMP: /usr/lib/libgmpxx.so
-- Checking for module 'mpir >= 3.0'
-- Package 'mpir', required by 'virtual:world', not found
-- Could NOT find MPIR (missing: MPIRXX_LIBRARY MPIR_LIBRARY MPIR_INCLUDE_DIR)
-- Found MPLIB: /usr/lib/libgmpxx.so
-- Found Boost: /usr/lib64/cmake/Boost-1.76.0/BoostConfig.cmake (found suitable version "1.76.0", minimum required is "1.76.0") found components: date_time program_options filesystem system regex thread unit_test_framework
-- Found Volk: Volk::volk
-- User set python executable /usr/bin/python3
-- Found PythonInterp: /usr/bin/python3 (found version "3.9.5")
-- Found PythonLibs: /usr/lib/libpython3.9.so (found suitable exact version "3.9.5")
-- Checking for module 'fftw3f >= 3.0'
-- Found fftw3f , version 3.3.9
-- Found FFTW3f: /lib/libfftw3f.so
-- Found Git: /usr/bin/git
-- Extracting version information from git describe...
-- Found Doxygen: /usr/bin/doxygen (found version "1.9.1") found components: doxygen dot
-- Using install prefix: /usr
-- Building for version: 48cdeafd / 1.0.0git
-- No C++ unit tests... skipping
--
-- Checking for module SWIG
-- Found SWIG version 4.0.2.
-- Found SWIG: /usr/bin/swig
-- Found PythonLibs: /usr/lib/libpython3.9.so (found version "3.9.5")
-- Configuring done
-- Generating done
-- Build files have been written to: /home/madmax/aur/gr-iridium-git/src/gr-iridium/build
[ 4%] Building CXX object swig/CMakeFiles/_iridium_swig_doc_tag.dir/_iridium_swig_doc_tag.cpp.o
[ 9%] Shebangin iridium-extractor
[ 14%] Generating documentation with doxygen
[ 19%] Building CXX object lib/CMakeFiles/gnuradio-iridium.dir/fft_burst_tagger_impl.cc.o
[ 33%] Building CXX object lib/CMakeFiles/gnuradio-iridium.dir/burst_downmix_impl.cc.o
[ 33%] Generating __init__.pyc, iridium_extractor_flowgraph.pyc, iridium_qpsk_demod.pyc, gr_iridium.pyc, gr_iridium_demod.pyc, iridium_frame_printer.pyc, frame_sorter.pyc
[ 33%] Building CXX object lib/CMakeFiles/gnuradio-iridium.dir/iuchar_to_complex_impl.cc.o
[ 42%] Building CXX object lib/CMakeFiles/gnuradio-iridium.dir/pdu_round_robin_impl.cc.o
[ 42%] Building CXX object lib/CMakeFiles/gnuradio-iridium.dir/tagged_burst_to_pdu_impl.cc.o
[ 47%] Generating __init__.pyo, iridium_extractor_flowgraph.pyo, iridium_qpsk_demod.pyo, gr_iridium.pyo, gr_iridium_demod.pyo, iridium_frame_printer.pyo, frame_sorter.pyo
[ 52%] Building CXX object lib/CMakeFiles/gnuradio-iridium.dir/iridium_qpsk_demod_cpp_impl.cc.o
[ 57%] Building CXX object lib/CMakeFiles/gnuradio-iridium.dir/pdu_null_sink_impl.cc.o
warning: Tag 'TCL_SUBST' at line 207 of file '/home/madmax/aur/gr-iridium-git/src/gr-iridium/build/docs/doxygen/Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Invalid value for 'FILTER_PATTERNS' tag at line 793, file /home/madmax/aur/gr-iridium-git/src/gr-iridium/build/docs/doxygen/Doxyfile: Values in list '*.py="/home/madmax/aur/gr-iridium-git/src/gr-iridium"/doc/doxygen/other/doxypy.py' are not properly space or comma separated
warning: Tag 'COLS_IN_ALPHA_INDEX' at line 886 of file '/home/madmax/aur/gr-iridium-git/src/gr-iridium/build/docs/doxygen/Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'PERL_PATH' at line 1686 of file '/home/madmax/aur/gr-iridium-git/src/gr-iridium/build/docs/doxygen/Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'MSCGEN_PATH' at line 1707 of file '/home/madmax/aur/gr-iridium-git/src/gr-iridium/build/docs/doxygen/Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
error: Illegal format for option FILTER_PATTERNS, no equal sign ('=') specified for item '/doc/doxygen/other/doxypy.py'
[ 61%] Linking CXX executable _iridium_swig_doc_tag
[ 61%] Built target pygen_apps_1b35f
[ 61%] Built target _iridium_swig_doc_tag
[ 61%] Built target pygen_python_088dd
[ 66%] Generating doxygen xml for iridium_swig_doc docs
warning: Tag 'TCL_SUBST' at line 207 of file '/home/madmax/aur/gr-iridium-git/src/gr-iridium/build/swig/iridium_swig_doc_swig_docs/Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'COLS_IN_ALPHA_INDEX' at line 854 of file '/home/madmax/aur/gr-iridium-git/src/gr-iridium/build/swig/iridium_swig_doc_swig_docs/Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'PERL_PATH' at line 1654 of file '/home/madmax/aur/gr-iridium-git/src/gr-iridium/build/swig/iridium_swig_doc_swig_docs/Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'MSCGEN_PATH' at line 1675 of file '/home/madmax/aur/gr-iridium-git/src/gr-iridium/build/swig/iridium_swig_doc_swig_docs/Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: argument 'a4wide' for option PAPER_TYPE is not a valid enum value
Using the default: a4!
[ 71%] Generating python docstrings for iridium_swig_doc
[ 71%] Built target iridium_swig_swig_doc
Scanning dependencies of target iridium_swig_swig_compilation
[ 76%] Swig source iridium_swig.i
[ 76%] Built target doxygen_target
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_null_sink_impl.cc: In constructor 'gr::iridium::pdu_null_sink_impl::pdu_null_sink_impl()':
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_null_sink_impl.cc:48:88: error: '_1' was not declared in this scope
48 | set_msg_handler(pmt::mp("pdus"), boost::bind(&pdu_null_sink_impl::handler, this, _1));
| ^~
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_null_sink_impl.cc:48:88: note: suggested alternatives:
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/iterator_adaptor.hpp:14,
from /usr/include/boost/iterator/reverse_iterator.hpp:10,
from /usr/include/boost/range/reverse_iterator.hpp:21,
from /usr/include/boost/range/rend.hpp:19,
from /usr/include/boost/foreach.hpp:82,
from /usr/include/gnuradio/basic_block.h:33,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/pdu_null_sink.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_null_sink_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_null_sink_impl.cc:26:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
In file included from /usr/include/boost/smart_ptr/detail/shared_count.hpp:37,
from /usr/include/boost/smart_ptr/shared_ptr.hpp:17,
from /usr/include/boost/shared_ptr.hpp:17,
from /usr/include/gnuradio/types.h:28,
from /usr/include/gnuradio/runtime_types.h:27,
from /usr/include/gnuradio/io_signature.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_null_sink_impl.cc:25:
/usr/include/c++/11.1.0/functional:225:34: note: 'std::placeholders::_1'
225 | extern const _Placeholder<1> _1;
| ^~
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/iterator_adaptor.hpp:14,
from /usr/include/boost/iterator/reverse_iterator.hpp:10,
from /usr/include/boost/range/reverse_iterator.hpp:21,
from /usr/include/boost/range/rend.hpp:19,
from /usr/include/boost/foreach.hpp:82,
from /usr/include/gnuradio/basic_block.h:33,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/pdu_null_sink.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_null_sink_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_null_sink_impl.cc:26:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
In file included from /usr/include/boost/bind/bind.hpp:2336,
from /usr/include/boost/thread/detail/thread.hpp:33,
from /usr/include/boost/thread/thread_only.hpp:22,
from /usr/include/boost/thread/thread.hpp:12,
from /usr/include/gnuradio/thread/thread.h:31,
from /usr/include/gnuradio/basic_block.h:31,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/pdu_null_sink.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_null_sink_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_null_sink_impl.cc:26:
/usr/include/boost/bind/placeholders.hpp:58:38: note: 'boost::placeholders::_ '
58 | BOOST_STATIC_CONSTEXPR boost::arg<1> _1;
| ^~
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/iterator_adaptor.hpp:14,
from /usr/include/boost/iterator/reverse_iterator.hpp:10,
from /usr/include/boost/range/reverse_iterator.hpp:21,
from /usr/include/boost/range/rend.hpp:19,
from /usr/include/boost/foreach.hpp:82,
from /usr/include/gnuradio/basic_block.h:33,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/pdu_null_sink.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_null_sink_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_null_sink_impl.cc:26:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_round_robin_impl.cc: In constructor 'gr::iridium::pdu_round_robin_impl::pdu_round_robin_impl(int)':
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_round_robin_impl.cc:52:88: error: '_1' was not declared in this scope
52 | set_msg_handler(pmt::mp("in"), boost::bind(&pdu_round_robin_impl::handler, this, _1));
| ^~
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_round_robin_impl.cc:52:88: note: suggested alternatives:
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/iterator_adaptor.hpp:14,
from /usr/include/boost/iterator/reverse_iterator.hpp:10,
from /usr/include/boost/range/reverse_iterator.hpp:21,
from /usr/include/boost/range/rend.hpp:19,
from /usr/include/boost/foreach.hpp:82,
from /usr/include/gnuradio/basic_block.h:33,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/pdu_round_robin.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_round_robin_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_round_robin_impl.cc:26:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
In file included from /usr/include/boost/smart_ptr/detail/shared_count.hpp:37,
from /usr/include/boost/smart_ptr/shared_ptr.hpp:17,
from /usr/include/boost/shared_ptr.hpp:17,
from /usr/include/gnuradio/types.h:28,
from /usr/include/gnuradio/runtime_types.h:27,
from /usr/include/gnuradio/io_signature.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_round_robin_impl.cc:25:
/usr/include/c++/11.1.0/functional:225:34: note: 'std::placeholders::_1'
225 | extern const _Placeholder<1> _1;
| ^~
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/iterator_adaptor.hpp:14,
from /usr/include/boost/iterator/reverse_iterator.hpp:10,
from /usr/include/boost/range/reverse_iterator.hpp:21,
from /usr/include/boost/range/rend.hpp:19,
from /usr/include/boost/foreach.hpp:82,
from /usr/include/gnuradio/basic_block.h:33,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/pdu_round_robin.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_round_robin_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_round_robin_impl.cc:26:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
In file included from /usr/include/boost/bind/bind.hpp:2336,
from /usr/include/boost/thread/detail/thread.hpp:33,
from /usr/include/boost/thread/thread_only.hpp:22,
from /usr/include/boost/thread/thread.hpp:12,
from /usr/include/gnuradio/thread/thread.h:31,
from /usr/include/gnuradio/basic_block.h:31,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/pdu_round_robin.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_round_robin_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_round_robin_impl.cc:26:
/usr/include/boost/bind/placeholders.hpp:58:38: note: 'boost::placeholders::_ '
58 | BOOST_STATIC_CONSTEXPR boost::arg<1> _1;
| ^~
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/iterator_adaptor.hpp:14,
from /usr/include/boost/iterator/reverse_iterator.hpp:10,
from /usr/include/boost/range/reverse_iterator.hpp:21,
from /usr/include/boost/range/rend.hpp:19,
from /usr/include/boost/foreach.hpp:82,
from /usr/include/gnuradio/basic_block.h:33,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/pdu_round_robin.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_round_robin_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/pdu_round_robin_impl.cc:26:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
[ 76%] Built target iridium_swig_swig_compilation
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/iridium_qpsk_demod_cpp_impl.cc: In constructor 'gr::iridium::iridium_qpsk_demod_cpp_impl::iridium_qpsk_demod_cpp_impl()':
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/iridium_qpsk_demod_cpp_impl.cc:65:98: error: '_1' was not declared in this scope
65 | set_msg_handler(pmt::mp("cpdus"), boost::bind(&iridium_qpsk_demod_cpp_impl::handler, this, _1));
| ^~
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/iridium_qpsk_demod_cpp_impl.cc:65:98: note: suggested alternatives:
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/iterator_adaptor.hpp:14,
from /usr/include/boost/iterator/reverse_iterator.hpp:10,
from /usr/include/boost/range/reverse_iterator.hpp:21,
from /usr/include/boost/range/rend.hpp:19,
from /usr/include/boost/foreach.hpp:82,
from /usr/include/gnuradio/basic_block.h:33,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/iridium_qpsk_demod_cpp.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/iridium_qpsk_demod_cpp_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/iridium_qpsk_demod_cpp_impl.cc:28:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
In file included from /usr/include/boost/smart_ptr/detail/shared_count.hpp:37,
from /usr/include/boost/smart_ptr/shared_ptr.hpp:17,
from /usr/include/boost/shared_ptr.hpp:17,
from /usr/include/gnuradio/types.h:28,
from /usr/include/gnuradio/runtime_types.h:27,
from /usr/include/gnuradio/io_signature.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/iridium_qpsk_demod_cpp_impl.cc:27:
/usr/include/c++/11.1.0/functional:225:34: note: 'std::placeholders::_1'
225 | extern const _Placeholder<1> _1;
| ^~
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/iterator_adaptor.hpp:14,
from /usr/include/boost/iterator/reverse_iterator.hpp:10,
from /usr/include/boost/range/reverse_iterator.hpp:21,
from /usr/include/boost/range/rend.hpp:19,
from /usr/include/boost/foreach.hpp:82,
from /usr/include/gnuradio/basic_block.h:33,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/iridium_qpsk_demod_cpp.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/iridium_qpsk_demod_cpp_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/iridium_qpsk_demod_cpp_impl.cc:28:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
In file included from /usr/include/boost/bind/bind.hpp:2336,
from /usr/include/boost/thread/detail/thread.hpp:33,
from /usr/include/boost/thread/thread_only.hpp:22,
from /usr/include/boost/thread/thread.hpp:12,
from /usr/include/gnuradio/thread/thread.h:31,
from /usr/include/gnuradio/basic_block.h:31,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/iridium_qpsk_demod_cpp.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/iridium_qpsk_demod_cpp_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/iridium_qpsk_demod_cpp_impl.cc:28:
/usr/include/boost/bind/placeholders.hpp:58:38: note: 'boost::placeholders::_ '
58 | BOOST_STATIC_CONSTEXPR boost::arg<1> _1;
| ^~
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/iterator_adaptor.hpp:14,
from /usr/include/boost/iterator/reverse_iterator.hpp:10,
from /usr/include/boost/range/reverse_iterator.hpp:21,
from /usr/include/boost/range/rend.hpp:19,
from /usr/include/boost/foreach.hpp:82,
from /usr/include/gnuradio/basic_block.h:33,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/iridium_qpsk_demod_cpp.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/iridium_qpsk_demod_cpp_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/iridium_qpsk_demod_cpp_impl.cc:28:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/burst_downmix_impl.cc: In constructor 'gr::iridium::burst_downmix_impl::burst_downmix_impl(int, int, size_t, const std::vector<float>&, const std::vector<float>&, bool)':
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/burst_downmix_impl.cc:157:89 error: '_1' was not declared in this scope
157 | set_msg_handler(pmt::mp("cpdus"), boost::bind(&burst_downmix_impl::handler, this, _1));
| ^~
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/burst_downmix_impl.cc:157:89 note: suggested alternatives:
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/advance.hpp:11,
from /usr/include/boost/next_prior.hpp:25,
from /usr/include/boost/thread/futures/wait_for_any.hpp:20,
from /usr/include/boost/thread/future.hpp:41,
from /usr/include/boost/thread.hpp:24,
from /usr/include/gnuradio/fft/fft.h:32,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/burst_downmix_impl.cc:28:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
In file included from /usr/include/boost/smart_ptr/detail/shared_count.hpp:37,
from /usr/include/boost/smart_ptr/shared_ptr.hpp:17,
from /usr/include/boost/shared_ptr.hpp:17,
from /usr/include/gnuradio/types.h:28,
from /usr/include/gnuradio/runtime_types.h:27,
from /usr/include/gnuradio/io_signature.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/burst_downmix_impl.cc:27:
/usr/include/c++/11.1.0/functional:225:34: note: 'std::placeholders::_1'
225 | extern const _Placeholder<1> _1;
| ^~
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/advance.hpp:11,
from /usr/include/boost/next_prior.hpp:25,
from /usr/include/boost/thread/futures/wait_for_any.hpp:20,
from /usr/include/boost/thread/future.hpp:41,
from /usr/include/boost/thread.hpp:24,
from /usr/include/gnuradio/fft/fft.h:32,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/burst_downmix_impl.cc:28:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
In file included from /usr/include/boost/bind/bind.hpp:2336,
from /usr/include/boost/thread/detail/thread.hpp:33,
from /usr/include/boost/thread/thread_only.hpp:22,
from /usr/include/boost/thread/thread.hpp:12,
from /usr/include/boost/thread.hpp:13,
from /usr/include/gnuradio/fft/fft.h:32,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/burst_downmix_impl.cc:28:
/usr/include/boost/bind/placeholders.hpp:58:38: note: 'boost::placeholders::_ '
58 | BOOST_STATIC_CONSTEXPR boost::arg<1> _1;
| ^~
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/advance.hpp:11,
from /usr/include/boost/next_prior.hpp:25,
from /usr/include/boost/thread/futures/wait_for_any.hpp:20,
from /usr/include/boost/thread/future.hpp:41,
from /usr/include/boost/thread.hpp:24,
from /usr/include/gnuradio/fft/fft.h:32,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/burst_downmix_impl.cc:28:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/burst_downmix_impl.cc: In member function 'virtual int gr::iridium::burst_downmix_impl::work(int, gr_vector_const_void_star&, gr_vector_void_star&)':
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/burst_downmix_impl.cc:833:5: warning: no return statement in function returning non-void [-Wreturn-type]
833 | }
| ^
make[2]: *** [lib/CMakeFiles/gnuradio-iridium.dir/build.make:132: lib/CMakeFiles/gnuradio-iridium.dir/pdu_null_sink_impl.cc.o] Error 1
make[2]: *** Waiting for unfinished jobs....
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/tagged_burst_to_pdu_impl.cc: In constructor 'gr::iridium::tagged_burst_to_pdu_impl::tagged_burst_to_pdu_impl(int, float, float, float, int, bool)':
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/tagged_burst_to_pdu_impl.cc:69:109: error: '_1' was not declared in this scope
69 | set_msg_handler(pmt::mp("burst_handled"), boost::bind(&tagged_burst_to_pdu_impl::burst_handled, this, _1));
| ^~
/home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/tagged_burst_to_pdu_impl.cc:69:109: note: suggested alternatives:
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/iterator_adaptor.hpp:14,
from /usr/include/boost/iterator/reverse_iterator.hpp:10,
from /usr/include/boost/range/reverse_iterator.hpp:21,
from /usr/include/boost/range/rend.hpp:19,
from /usr/include/boost/foreach.hpp:82,
from /usr/include/gnuradio/basic_block.h:33,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/tagged_burst_to_pdu.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/tagged_burst_to_pdu_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/tagged_burst_to_pdu_impl.cc:26:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
In file included from /usr/include/boost/smart_ptr/detail/shared_count.hpp:37,
from /usr/include/boost/smart_ptr/shared_ptr.hpp:17,
from /usr/include/boost/shared_ptr.hpp:17,
from /usr/include/gnuradio/types.h:28,
from /usr/include/gnuradio/runtime_types.h:27,
from /usr/include/gnuradio/io_signature.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/tagged_burst_to_pdu_impl.cc:25:
/usr/include/c++/11.1.0/functional:225:34: note: 'std::placeholders::_1'
225 | extern const _Placeholder<1> _1;
| ^~
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/iterator_adaptor.hpp:14,
from /usr/include/boost/iterator/reverse_iterator.hpp:10,
from /usr/include/boost/range/reverse_iterator.hpp:21,
from /usr/include/boost/range/rend.hpp:19,
from /usr/include/boost/foreach.hpp:82,
from /usr/include/gnuradio/basic_block.h:33,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/tagged_burst_to_pdu.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/tagged_burst_to_pdu_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/tagged_burst_to_pdu_impl.cc:26:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
In file included from /usr/include/boost/bind/bind.hpp:2336,
from /usr/include/boost/thread/detail/thread.hpp:33,
from /usr/include/boost/thread/thread_only.hpp:22,
from /usr/include/boost/thread/thread.hpp:12,
from /usr/include/gnuradio/thread/thread.h:31,
from /usr/include/gnuradio/basic_block.h:31,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/tagged_burst_to_pdu.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/tagged_burst_to_pdu_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/tagged_burst_to_pdu_impl.cc:26:
/usr/include/boost/bind/placeholders.hpp:58:38: note: 'boost::placeholders::_ '
58 | BOOST_STATIC_CONSTEXPR boost::arg<1> _1;
| ^~
In file included from /usr/include/boost/mpl/aux_/include_preprocessed.hpp:37,
from /usr/include/boost/mpl/placeholders.hpp:43,
from /usr/include/boost/iterator/iterator_categories.hpp:16,
from /usr/include/boost/iterator/iterator_adaptor.hpp:14,
from /usr/include/boost/iterator/reverse_iterator.hpp:10,
from /usr/include/boost/range/reverse_iterator.hpp:21,
from /usr/include/boost/range/rend.hpp:19,
from /usr/include/boost/foreach.hpp:82,
from /usr/include/gnuradio/basic_block.h:33,
from /usr/include/gnuradio/block.h:27,
from /usr/include/gnuradio/sync_block.h:27,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/../include/iridium/tagged_burst_to_pdu.h:25,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/tagged_burst_to_pdu_impl.h:24,
from /home/madmax/aur/gr-iridium-git/src/gr-iridium/lib/tagged_burst_to_pdu_impl.cc:26:
/usr/include/boost/mpl/aux_/preprocessed/gcc/placeholders.hpp:29:16: note: 'mpl_::_1'
29 | typedef arg<1> _1;
| ^~
make[2]: *** [lib/CMakeFiles/gnuradio-iridium.dir/build.make:160: lib/CMakeFiles/gnuradio-iridium.dir/pdu_round_robin_impl.cc.o] Error 1
make[2]: *** [lib/CMakeFiles/gnuradio-iridium.dir/build.make:146: lib/CMakeFiles/gnuradio-iridium.dir/iridium_qpsk_demod_cpp_impl.cc.o] Error 1
make[2]: *** [lib/CMakeFiles/gnuradio-iridium.dir/build.make:118: lib/CMakeFiles/gnuradio-iridium.dir/burst_downmix_impl.cc.o] Error 1
make[2]: *** [lib/CMakeFiles/gnuradio-iridium.dir/build.make:104: lib/CMakeFiles/gnuradio-iridium.dir/tagged_burst_to_pdu_impl.cc.o] Error 1
make[1]: *** [CMakeFiles/Makefile2:254: lib/CMakeFiles/gnuradio-iridium.dir/all] Error 2
make: *** [Makefile:146: all] Error 2
Aborting...
Error on iridium-extractor running fresh ubuntu installation
user@user-VirtualBox:~/Documents/gr-iridium$ iridium-extractor -D 4 examples/rtl-sdr.conf | grep "A:OK" > output.bits
gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.8.1.0
built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri hackrf bladerf rfspace airspy airspyhf soapy redpitaya freesrp
Using device #0 Realtek RTL2838UHIDIR SN: 00000001
Detached kernel driver
Found Rafael Micro R820T tuner
[R82XX] PLL not locked!
Exact sample rate is: 2000000.052982 Hz
[R82XX] PLL not locked!
(RF) Gain: 19.7 (Requested 19)
WARNING: Gain if not supported by source!
Supported gains: ('LNA',)
Bandwidth: 0.0 (Requested 0)
Warning: Setting antenna to RX
Traceback (most recent call last):
File "/usr/local/bin/iridium-extractor", line 244, in
tb = iridium.iridium_extractor_flowgraph.FlowGraph(center_frequency=center, sample_rate=sample_rate, decimation=decimation,
File "/usr/local/lib/python3/dist-packages/iridium/iridium_extractor_flowgraph.py", line 248, in init
tb.connect(source, self._fft_burst_tagger)
File "/usr/lib/python3/dist-packages/gnuradio/gr/hier_block2.py", line 37, in wrapped
func(self, src, src_port, dst, dst_port)
File "/usr/lib/python3/dist-packages/gnuradio/gr/hier_block2.py", line 100, in connect
self.primitive_connect(*args)
TypeError: primitive_connect(): incompatible function arguments. The following argument types are supported:
1. (self: gnuradio.gr.gr_python.hier_block2_pb, block: gnuradio.gr.gr_python.basic_block) -> None
2. (self: gnuradio.gr.gr_python.hier_block2_pb, src: gnuradio.gr.gr_python.basic_block, src_port: int, dst: gnuradio.gr.gr_python.basic_block, dst_port: int) -> None
Invoked with: <gnuradio.gr.gr_python.top_block_pb object at 0x7f478a079ef0>, <Swig Object of type 'gr::basic_block_sptr *' at 0x7f4789900210>, 0, <gnuradio.gr.gr_python.basic_block object at 0x7f47899c4270>, 0
Tagged 0 bursts
I have gnuradio installed version 3.9.2.0
(Note I also had to install osmosdr manually (apt-get install gr-osmosdr) and I also encountered the issue where I enter the python path command as described in issue 5. (Module iridium not found).
Ubuntu version was 20.04.2.0
This is a fresh ubuntu installation and I installed gnuradio from the gnuradio-releases repository as instructed in other issues)
Airspy Bias-T support
I tried adding 'bias=1' in my airspy.conf but it did not work. Is this option being passed into gr-osmosdr?
Thanks.
gr iridium
Tag releases compatible with GR 3.8 and 3.9
I suggested to @Sec42 that users would benefit from having a conda package available for gr-iridium. It looks like that should be easy enough dependency-wise, but it would also be really helpful for me in creating that package if you could tag some recent releases that are compatible with GNU Radio 3.8 and 3.9. Thanks!
FFT_burst error
Getting this error when I run iridium-extractor -D 4 hackrf.conf | grep "A:OK" > output.bits in the 'examples' folder:
gr-osmosdr 0.1.4 (0.1.4) gnuradio 3.7.9 built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri hackrf bladerf rfspace airspy redpitaya Using HackRF One with firmware 2014.08.1 (RF) Gain: 14.0 (Requested 20) IF Gain: 40.0 (Requested 40) BB Gain: 20.0 (Requested 20) Bandwidth: 10000000.0 (Requested 10000000) Traceback (most recent call last): File "/usr/local/bin/iridium-extractor", line 193, in <module> verbose=verbose) File "/usr/local/lib/python2.7/dist-packages/iridium/iridium_extractor_flowgraph.py", line 175, in __init__ self._fft_burst_tagger = iridium.fft_burst_tagger(center_frequency=self._center_frequency, AttributeError: 'module' object has no attribute 'fft_burst_tagger'
I'm using Ubuntu 16.04 LTS
can not run iridium extractor
Hi all ,
please help me as i can not run iridium extractor ? i am wondering why ?
1623837871 | i: 0/s | i_avg: 0/s | q: 0 | q_max: 0 | o: 0/s | ok: 0% | ok: 0/s | ok_avg: 0% | ok: 0 | ok_avg: 0/s | d: 0
Traceback (most recent call last):
File "/usr/local/bin/iridium-extractor", line 247, in
tb.run()
File "/usr/lib/python3/dist-packages/gnuradio/gr/top_block.py", line 123, in run
self.start(max_noutput_items)
File "/usr/lib/python3/dist-packages/gnuradio/gr/top_block.py", line 111, in start
top_block_start_unlocked(self._impl, max_noutput_items)
File "/usr/lib/python3/dist-packages/gnuradio/gr/runtime_swig.py", line 4832, in top_block_start_unlocked
return _runtime_swig.top_block_start_unlocked(r, max_noutput_items)
RuntimeError: list contains invalid format!
Conf file for SDRduo
Good afternoon everyone! I was thinking that within the most common and affordable SDR is the sdrplay duo, I wanted to know if someone has configured a conf file for that device, really, that would be a great improvement.
Greetings!
Implausible signal levels
gr-iridium sometimes outputs an implausible signal level e.g.
RAW: i-1474564631-t1 9738470 1625457152 A:OK I:00029974620 96% 17284762435584.000 179 0011...
voice message and sms not able to decode after output.parsed
Hello Everyone
I have received many message from iridium satellite but not able to play using play-iridium-ambe and decode IMS packet in text format. Even if i am running wire-shark command sudo wireshark -k -Y 'gsmtap && !icmp' -i lo, this command is not running at all and no output is visible. I am posting some message which i captured through iridium toolkit.
IMS: i-1487244202-t1 000038402 1626451072 96% 0.002 132 DL 00110011111100110011001111110011 odd:100001 4:A:06 1 c=02201 00000000 00000000000000000000 00000000000000000000 00000000000000000000 descr_extra:0110101101011110011100110011110001101011
VOC: i-1487751545-t1 000252522 1621335936 97% 0.002 179 DL LCW(0,T:rsrvd,C:<>(48),1048560 E0) [49.48.ce.db.82.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.44]
kindly help me what i have to run to get sms and voice using iridium toolkit.
Thanking You
Getting ERROR ON RUN TIME
gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.8.1.0
built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri hackrf bladerf rfspace airspy airspyhf soapy redpitaya freesrp
[INFO] [UHD] linux; GNU C++ version 9.2.1 20200304; Boost_107100; UHD_3.15.0.0-2build5
Detached kernel driver
Found Rafael Micro R820T tuner
Reattached kernel driver
Using device #0 Realtek RTL2838UHIDIR SN: 00000001
Detached kernel driver
Found Rafael Micro R820T tuner
[R82XX] PLL not locked!
Exact sample rate is: 2000000.052982 Hz
[R82XX] PLL not locked!
(RF) Gain: 19.7 (Requested 19)
WARNING: Gain if not supported by source!
Supported gains: ('LNA',)
Bandwidth: 0.0 (Requested 0)
Warning: Setting antenna to RX
1616693210 | i: 0/s | i_avg: 0/s | q: 0 | q_max: 0 | o: 0/s | ok: 0% | ok: 0/s | ok_avg: 0% | ok: 0 | ok_avg: 0/s | d: 0
Traceback (most recent call last):
File "/usr/local/bin/iridium-extractor", line 247, in
tb.run()
File "/usr/local/lib/python3/dist-packages/gnuradio/gr/top_block.py", line 123, in run
self.start(max_noutput_items)
File "/usr/local/lib/python3/dist-packages/gnuradio/gr/top_block.py", line 111, in start
top_block_start_unlocked(self._impl, max_noutput_items)
File "/usr/local/lib/python3/dist-packages/gnuradio/gr/runtime_swig.py", line 4832, in top_block_start_unlocked
return _runtime_swig.top_block_start_unlocked(r, max_noutput_items)
RuntimeError: list contains invalid format!
Getting Above error on both RTL-SDR AND HACKRF
gnuradio 3.8.1.0 is already build and installed
please help me out
Ability to specify RF Device
I just happen to be using this on a machine that has both a HackRF and an RTLSDR connected, and at the moment I have to unplug the RTLSDR in order for gr-iridium to select the proper device. Is there a simple way for me to select the proper radio device to use from the command-line?
jack server is not running or cannot be started
Hello
I am running ubuntu 18.04 LTS. I've got this error when I start.
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
Any ideas ?
Thank you
Overflowing some part of the chain with 6MSPS config
I am using an airspy mini with this config:
[osmosdr-source] device_args='airspy=0,bias=1' sample_rate=6000000 center_freq=1622000000 #bandwidth=6000000 gain=18
And a couple of seconds after running iridium-extractor, the output starts spitting OOOOOOOOOOOOOOOOOOOOOOOOOOOOOs:
iridium-extractor -D 4 airspy.conf | grep "A:OK" > nfs/output.bits gr-osmosdr v0.1.4-75-gae686c46 (0.1.5git) gnuradio v3.7.10.1-190-g3f14e437 built-in source types: file osmosdr fcd rtl rtl_tcp uhd hackrf bladerf rfspace airspy redpitaya Using AirSpy MINI v1.0.0-rc10-0-g946184a 2016-09-19, samplerates: 3M 6M (RF) Gain: 18.0 (Requested 18) Warning: Setting bandwidth to 10000000.0 1483815950 | i: 0/s | i_avg: 0/s | q: 0 | q_max: 0 | o: 0/s | ok: 0% | ok: 0/s | ok_avg: 0% | ok: 0 | ok_avg: 0/s | d: 0 1483815951 | i: 0/s | i_avg: 0/s | q: 0 | q_max: 0 | o: 0/s | ok: 0% | ok: 0/s | ok_avg: 0% | ok: 0 | ok_avg: 0/s | d: 0 OOOOOOOOOOOOOOOOOOOOOOOOOOOOOO1483815952 | i: 0/s | i_avg: 0/s | q: 0 | q_max: 1 | o: 0/s | ok: 0% | ok: 0/s | ok_avg: 0% | ok: 0 | ok_avg: 0/s | d: 0 OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO1483815953 | i: 1/s | i_avg: 0/s | q: 0 | q_max: 1 | o: 1/s | ok: 0% | ok: 0/s | ok_avg: 0% | ok: 0 | ok_avg: 0/s | d: 0 OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO1483815954 | i: 9/s | i_avg: 3/s | q: 0 | q_max: 4 | o: 8/s | ok: 20% | ok: 1/s | ok_avg: 15% | ok: 2 | ok_avg: 0/s | d: 0 OOOOOOOOOOOO^C
It seems to work, but I don't know how to fix this.
Segfault during live capture under OS X
I realise OS X may not be official supported (?), and I will try this under a Linux machine tomorrow to see if I encounter the same issue. That said, I'm not sure if this but may affect other platforms.
I'm running with a HackRF, and have tried various variations of the command iridium-extractor -D 4 Examples/hackrf.conf | grep "A:OK" >> output.bits for capture. It doesn't seen to error out after X seconds... sometimes it's after one second, other times a few minutes.
The full stack-trace is available here: https://gist.github.com/JosephRedfern/0e8f8482aba7305d64d9b540c6428542
I believe the relevant section is this:
Thread 5 Crashed:
0 libgnuradio-iridium.dylib 0x000000010e9755fd gr::iridium::burst_downmix_impl::process_next_frame(float, float, unsigned long long, unsigned long long, unsigned long, int) + 909 (burst_downmix_impl.cc:396)
1 libgnuradio-iridium.dylib 0x000000010e974b07 gr::iridium::burst_downmix_impl::handler(boost::intrusive_ptr<pmt::pmt_base>) + 5079 (burst_downmix_impl.cc:707)
2 libgnuradio-iridium.dylib 0x000000010e97c35d boost::_mfi::mf1<void, gr::iridium::burst_downmix_impl, boost::intrusive_ptr<pmt::pmt_base> >::operator()(gr::iridium::burst_downmix_impl*, boost::intrusive_ptr<pmt::pmt_base>) const + 141 (mem_fn_template.hpp:165)
3 libgnuradio-iridium.dylib 0x000000010e97c29e void boost::_bi::list2<boost::_bi::value<gr::iridium::burst_downmix_impl*>, boost::arg<1> >::operator()<boost::_mfi::mf1<void, gr::iridium::burst_downmix_impl, boost::intrusive_ptr<pmt::pmt_base> >, boost::_bi::list1<boost::intrusive_ptr<pmt::pmt_base> const&> >(boost::_bi::type<void>, boost::_mfi::mf1<void, gr::iridium::burst_downmix_impl, boost::intrusive_ptr<pmt::pmt_base> >&, boost::_bi::list1<boost::intrusive_ptr<pmt::pmt_base> const&>&, int) + 126 (bind.hpp:313)
4 libgnuradio-iridium.dylib 0x000000010e97c20d void boost::_bi::bind_t<void, boost::_mfi::mf1<void, gr::iridium::burst_downmix_impl, boost::intrusive_ptr<pmt::pmt_base> >, boost::_bi::list2<boost::_bi::value<gr::iridium::burst_downmix_impl*>, boost::arg<1> > >::operator()<boost::intrusive_ptr<pmt::pmt_base> >(boost::intrusive_ptr<pmt::pmt_base>&&) + 77 (bind.hpp:905)
5 libgnuradio-iridium.dylib 0x000000010e97c040 boost::detail::function::void_function_obj_invoker1<boost::_bi::bind_t<void, boost::_mfi::mf1<void, gr::iridium::burst_downmix_impl, boost::intrusive_ptr<pmt::pmt_base> >, boost::_bi::list2<boost::_bi::value<gr::iridium::burst_downmix_impl*>, boost::arg<1> > >, void, boost::intrusive_ptr<pmt::pmt_base> >::invoke(boost::detail::function::function_buffer&, boost::intrusive_ptr<pmt::pmt_base>) + 48 (function_template.hpp:160)
6 libgnuradio-iridium.dylib 0x000000010e95ee5f boost::function1<void, boost::intrusive_ptr<pmt::pmt_base> >::operator()(boost::intrusive_ptr<pmt::pmt_base>) const + 175 (function_template.hpp:772)
7 libgnuradio-iridium.dylib 0x000000010e95d0b5 gr::basic_block::dispatch_msg(boost::intrusive_ptr<pmt::pmt_base>, boost::intrusive_ptr<pmt::pmt_base>) + 165 (basic_block.h:134)
8 libgnuradio-runtime.3.7.8.dylib 0x000000010ea5e0ce gr::tpb_thread_body::tpb_thread_body(boost::shared_ptr<gr::block>, int) + 2930
9 libgnuradio-runtime.3.7.8.dylib 0x000000010ea532f2 gr::tpb_container::operator()() + 74
10 libgnuradio-runtime.3.7.8.dylib 0x000000010ea5311e gr::thread::thread_body_wrapper<gr::tpb_container>::operator()() + 26
11 libboost_thread-mt.dylib 0x000000010f0556c5 boost::(anonymous namespace)::thread_proxy(void*) + 53
12 libsystem_pthread.dylib 0x00007fff9bf85c13 _pthread_body + 131
13 libsystem_pthread.dylib 0x00007fff9bf85b90 _pthread_start + 168
14 libsystem_pthread.dylib 0x00007fff9bf83375 thread_start + 13
Any pointers as to debugging this problem? It's possible I've done something very obviously wrong, so please don't rule that out!
AttributeError: 'source_sptr' object has no attribute 'set_mix_gain'
Hello,
Trying with an AIRSPY MINI and getting:
iridium-extractor -D 4 airspy.conf|grep "A:OK" > output.airspy.bits
gr-osmosdr v0.1.4-72-g164a09fc (0.1.5git) gnuradio 3.7.10
built-in source types: file fcd rtl rtl_tcp uhd hackrf bladerf rfspace airspy redpitaya
Using AirSpy MINI v1.0.0-rc9-0-ga56adfd 2016-06-12, samplerates: 3M 6M
(RF) Gain: 15.0 (Requested 15)
IF Gain: 7.0 (Requested 7)
Traceback (most recent call last):
File "/usr/local/bin/iridium-extractor", line 199, in <module>
verbose=verbose)
File "/usr/local/lib/python2.7/dist-packages/iridium/iridium_extractor_flowgraph.py", line 129, in __init__
source.set_mix_gain(mix_gain, 0)
AttributeError: 'source_sptr' object has no attribute 'set_mix_gain'
Any ideas what could be wrong ?
'module' object has no attribute 'fft_burst_tagger'
Environment: Clean fedora 23 x86_64 install, GnuRadio built with build-gnuradio script.
After building gr-iridium and installing, iridium-extractor fails because the iridium module does not contain 'fft_burst_tagger':
[user@iridium gr-iridium]$ iridium-extractor -c 1626000000 -r 2000000 -f float --offline testfile
linux; GNU C++ version 5.3.1 20160406 (Red Hat 5.3.1-6); Boost_105800; UHD_003.011.000.git-47-g3e352429
Traceback (most recent call last):
File "/usr/local/bin/iridium-extractor", line 199, in <module>
verbose=verbose)
File "/usr/local/lib64/python2.7/site-packages/iridium/iridium_extractor_flowgraph.py", line 173, in __init__
self._fft_burst_tagger = iridium.fft_burst_tagger(center_frequency=self._center_frequency,
AttributeError: 'module' object has no attribute 'fft_burst_tagger'
It seems the built iridium module does not have any of the SWIG stuff, only the pure python code:
[user@iridium gr-iridium]$ python
Python 2.7.11 (default, Aug 9 2016, 15:45:42)
[GCC 5.3.1 20160406 (Red Hat 5.3.1-6)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import iridium
>>> dir(iridium)
['__builtins__', '__doc__', '__file__', '__name__', '__package__', '__path__', 'gr_iridium', 'gr_iridium_demod', 'iridium_qpsk_demod']
Build log (no obviously relevant errors that I can see):
buildfailure.txt
No signals
Hello there, I have been playing around with this with my rtlv3 dongle and patch and i get no signals. In gqrx i can see what looks like sporadic peaks at about 1.621 ghz onwards but no decode in gr-iridium. Anyone had the same issues?
Cheers Kev
Also output noise level in addition to signal level
At the same time, maybe convert both to dB.
Possibe implementation is to output both values separated by "," in the current level field.
Other ideas welcome ;-)
osmosdr in gr-iridium?
New to linux and trying to run gr-iridium in Skywave Linux. When I try to run the extractor in terminal,I am greeted with this failure message:
dougw65@aa0dw-2:~$ iridium-extractor -D 4 examples/airspy.conf | grep "A:OK" > output.bits
Traceback (most recent call last):
File "/usr/local/bin/iridium-extractor", line 10, in
import iridium.iridium_extractor_flowgraph
File "/usr/local/lib/python2.7/dist-packages/iridium/iridium_extractor_flowgraph.py", line 8, in
import osmosdr
ImportError: No module named osmosdr
Osmsdr appears to be in the directory but not sure if this is a problem with "osmosdr" or perhaps gnu-radio?
appreciate any help/guidance
Can't build in a RaspberryPI 3 - link error
I' m trying to compile gr-iridium in a RaspberryPI 3 but when I try to compile it I have a link error (http://pastebin.com/Vjn7t9Ja).
Any suggestion to solve the issue?
Thanks in advance
error: no matching function for call to ‘gr::filter::kernel::fir_filter
I've been unable to compile due to the following errors, I have all required modules installed.
[ 4%] Building CXX object lib/CMakeFiles/gnuradio-iridium.dir/burst_downmix_impl.cc.o
/home/stuart/gr-iridium/lib/burst_downmix_impl.cc: In constructor ‘gr::iridium::burst_downmix_impl::burst_downmix_impl(int, int, size_t, const std::vector<float>&, const std::vector<float>&, bool)’:
/home/stuart/gr-iridium/lib/burst_downmix_impl.cc:144:71: error: no matching function for call to ‘gr::filter::kernel::fir_filter<std::complex<float>, std::complex<float>, float>::fir_filter(const std::vector<float>&)’
144 | d_cfo_est_fft(d_cfo_est_fft_size * d_fft_over_size_facor)
| ^
In file included from /home/stuart/gr-iridium/lib/burst_downmix_impl.h:25,
from /home/stuart/gr-iridium/lib/burst_downmix_impl.cc:32:
/usr/include/gnuradio/filter/fir_filter.h:36:5: note: candidate: ‘gr::filter::kernel::fir_filter<IN_T, OUT_T, TAP_T>::fir_filter(gr::filter::kernel::fir_filter<IN_T, OUT_T, TAP_T>&&) [with IN_T = std::complex<float>; OUT_T = std::complex<float>; TAP_T = float]’
36 | fir_filter(fir_filter&&) = default;
| ^~~~~~~~~~
/usr/include/gnuradio/filter/fir_filter.h:36:16: note: no known conversion for argument 1 from ‘const std::vector<float>’ to ‘gr::filter::kernel::fir_filter<std::complex<float>, std::complex<float>, float>&&’
36 | fir_filter(fir_filter&&) = default;
| ^~~~~~~~~~~~
/usr/include/gnuradio/filter/fir_filter.h:28:5: note: candidate: ‘gr::filter::kernel::fir_filter<IN_T, OUT_T, TAP_T>::fir_filter(int, const std::vector<TAP_T>&) [with IN_T = std::complex<float>; OUT_T = std::complex<float>; TAP_T = float]’
28 | fir_filter(int decimation, const std::vector<TAP_T>& taps);
| ^~~~~~~~~~
/usr/include/gnuradio/filter/fir_filter.h:28:5: note: candidate expects 2 arguments, 1 provided
/home/stuart/gr-iridium/lib/burst_downmix_impl.cc:144:71: error: no matching function for call to ‘gr::filter::kernel::fir_filter<float, float, float>::fir_filter(const std::vector<float>&)’
144 | d_cfo_est_fft(d_cfo_est_fft_size * d_fft_over_size_facor)
| ^
In file included from /home/stuart/gr-iridium/lib/burst_downmix_impl.h:25,
from /home/stuart/gr-iridium/lib/burst_downmix_impl.cc:32:
/usr/include/gnuradio/filter/fir_filter.h:36:5: note: candidate: ‘gr::filter::kernel::fir_filter<IN_T, OUT_T, TAP_T>::fir_filter(gr::filter::kernel::fir_filter<IN_T, OUT_T, TAP_T>&&) [with IN_T = float; OUT_T = float; TAP_T = float]’
36 | fir_filter(fir_filter&&) = default;
| ^~~~~~~~~~
/usr/include/gnuradio/filter/fir_filter.h:36:16: note: no known conversion for argument 1 from ‘const std::vector<float>’ to ‘gr::filter::kernel::fir_filter<float, float, float>&&’
36 | fir_filter(fir_filter&&) = default;
| ^~~~~~~~~~~~
/usr/include/gnuradio/filter/fir_filter.h:28:5: note: candidate: ‘gr::filter::kernel::fir_filter<IN_T, OUT_T, TAP_T>::fir_filter(int, const std::vector<TAP_T>&) [with IN_T = float; OUT_T = float; TAP_T = float]’
28 | fir_filter(int decimation, const std::vector<TAP_T>& taps);
| ^~~~~~~~~~
/usr/include/gnuradio/filter/fir_filter.h:28:5: note: candidate expects 2 arguments, 1 provided
/home/stuart/gr-iridium/lib/burst_downmix_impl.cc:144:71: error: no matching function for call to ‘gr::filter::kernel::fir_filter<std::complex<float>, std::complex<float>, float>::fir_filter(std::vector<float>)’
144 | d_cfo_est_fft(d_cfo_est_fft_size * d_fft_over_size_facor)
| ^
In file included from /home/stuart/gr-iridium/lib/burst_downmix_impl.h:25,
from /home/stuart/gr-iridium/lib/burst_downmix_impl.cc:32:
/usr/include/gnuradio/filter/fir_filter.h:36:5: note: candidate: ‘gr::filter::kernel::fir_filter<IN_T, OUT_T, TAP_T>::fir_filter(gr::filter::kernel::fir_filter<IN_T, OUT_T, TAP_T>&&) [with IN_T = std::complex<float>; OUT_T = std::complex<float>; TAP_T = float]’
36 | fir_filter(fir_filter&&) = default;
| ^~~~~~~~~~
/usr/include/gnuradio/filter/fir_filter.h:36:16: note: no known conversion for argument 1 from ‘std::vector<float>’ to ‘gr::filter::kernel::fir_filter<std::complex<float>, std::complex<float>, float>&&’
36 | fir_filter(fir_filter&&) = default;
| ^~~~~~~~~~~~
/usr/include/gnuradio/filter/fir_filter.h:28:5: note: candidate: ‘gr::filter::kernel::fir_filter<IN_T, OUT_T, TAP_T>::fir_filter(int, const std::vector<TAP_T>&) [with IN_T = std::complex<float>; OUT_T = std::complex<float>; TAP_T = float]’
28 | fir_filter(int decimation, const std::vector<TAP_T>& taps);
| ^~~~~~~~~~
/usr/include/gnuradio/filter/fir_filter.h:28:5: note: candidate expects 2 arguments, 1 provided
/home/stuart/gr-iridium/lib/burst_downmix_impl.cc:144:71: error: no matching function for call to ‘gr::filter::kernel::fir_filter<std::complex<float>, std::complex<float>, float>::fir_filter(std::vector<float>)’
144 | d_cfo_est_fft(d_cfo_est_fft_size * d_fft_over_size_facor)
| ^
In file included from /home/stuart/gr-iridium/lib/burst_downmix_impl.h:25,
from /home/stuart/gr-iridium/lib/burst_downmix_impl.cc:32:
/usr/include/gnuradio/filter/fir_filter.h:36:5: note: candidate: ‘gr::filter::kernel::fir_filter<IN_T, OUT_T, TAP_T>::fir_filter(gr::filter::kernel::fir_filter<IN_T, OUT_T, TAP_T>&&) [with IN_T = std::complex<float>; OUT_T = std::complex<float>; TAP_T = float]’
36 | fir_filter(fir_filter&&) = default;
| ^~~~~~~~~~
/usr/include/gnuradio/filter/fir_filter.h:36:16: note: no known conversion for argument 1 from ‘std::vector<float>’ to ‘gr::filter::kernel::fir_filter<std::complex<float>, std::complex<float>, float>&&’
36 | fir_filter(fir_filter&&) = default;
| ^~~~~~~~~~~~
/usr/include/gnuradio/filter/fir_filter.h:28:5: note: candidate: ‘gr::filter::kernel::fir_filter<IN_T, OUT_T, TAP_T>::fir_filter(int, const std::vector<TAP_T>&) [with IN_T = std::complex<float>; OUT_T = std::complex<float>; TAP_T = float]’
28 | fir_filter(int decimation, const std::vector<TAP_T>& taps);
| ^~~~~~~~~~
/usr/include/gnuradio/filter/fir_filter.h:28:5: note: candidate expects 2 arguments, 1 provided
/home/stuart/gr-iridium/lib/burst_downmix_impl.cc: In member function ‘virtual int gr::iridium::burst_downmix_impl::work(int, gr_vector_const_void_star&, gr_vector_void_star&)’:
/home/stuart/gr-iridium/lib/burst_downmix_impl.cc:833:5: warning: no return statement in function returning non-void [-Wreturn-type]
833 | }
| ^
make[2]: *** [lib/CMakeFiles/gnuradio-iridium.dir/build.make:102: lib/CMakeFiles/gnuradio-iridium.dir/burst_downmix_impl.cc.o] Error 1
make[2]: Leaving directory '/home/stuart/gr-iridium/build'
make[1]: *** [CMakeFiles/Makefile2:249: lib/CMakeFiles/gnuradio-iridium.dir/all] Error 2
make[1]: Leaving directory '/home/stuart/gr-iridium/build'
make: *** [Makefile:141: all] Error 2
Errors on cmake and make
There is something wrong when I compile. I try my best but still cannot solve it. Could you give me some help? Thanks.
neil@neil-virtual-machine:~/Desktop/master2/build$ cmake ..
-- Build type not specified: defaulting to release.
-- Checking for module 'mpir >= 3.0'
-- No package 'mpir' found
-- Could NOT find MPIR (missing: MPIRXX_LIBRARY MPIR_LIBRARY MPIR_INCLUDE_DIR)
-- User set python executable /usr/bin/python3
-- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython3.8.so (found suitable exact version "3.8.10")
-- Using install prefix: /usr/local
-- Building for version: v1.0-compat-xxx-xunknown / 1.0.0git
-- No C++ unit tests... skipping
-- Checking for module SWIG
-- Found SWIG version 4.0.1.
-- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython3.8.so (found version "3.8.10")
-- Configuring done
-- Generating done
-- Build files have been written to: /home/neil/Desktop/master2/build
neil@neil-virtual-machine:~/Desktop/master2/build$ make
make[2]: *** No rule to make target '/usr/lib/x86_64-linux-gnu/liborc-0.4.so', needed by 'lib/libgnuradio-iridium.so.v1.0-compat-xxx-xunknown'. Stop.
make[1]: *** [CMakeFiles/Makefile2:252: lib/CMakeFiles/gnuradio-iridium.dir/all] Error 2
make: *** [Makefile:141: all] Error 2
Gnuradio 3.7.5
Hi,
How I can build gr-iridium on Gnuradio 3.7.5 instead 3.7.6?
I can not update gnuradio 3.7.5, and I am stuck here..is there a possibility to install somehow on 3.7.5?
Regards,
Raf
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.