Missing option for generating trapezoid threads and other shapes about threadprofile HOT 2 OPEN

Thanks for the suggestion. I will look into it. Trapezoidal threads are not scalable in the same v threads are for the purposes of this workbench and the way the thread profiles are constructed.

from threadprofile.

Happy New Year to you!

My idea for trapezoid gears and also round gears is fully configurable threads.
Round gears should be relatively simple, comparable to V-threads. Would be good, if both radii (root and top of thread) and also base and outer diameter can be set, and this arcs are connected to each other by tangents. This would allow easy modification of profile.

Flat and trapezoid gears should be based on a few parameters. This way they can be generated by the same function.
Entering root diameter, outer diameter, pitch, width of profile on root and angle of sides gets into my mind.
This way I can define flat threads (side angle is 0 deg) and trapezoid threads (angle 10-20 deg), and also axial free play can be varied.

from threadprofile.