v.0.91 No TX audio with X6100 firmware 1.1.7.2 (September 2023) about ft8cn HOT 16 OPEN

FYI, I upgraded to v .91 a few weeks ago and the CAT and transmit audio seem to be working fine with the R1CBU alternate firmware. I believe that was also the case with the stock Xiegu firmware.

Hello, Using FT8CN with usb cable has no TX issues. My problem is related to WLAN connection from Android to X6100, where FT8CN connects wirelessly to WFserver on X6100. I am not using USB cable as X6100 is draining power from Android phone battery, this is a flaw (or feature) of USB OTG connectivity Thats why I desperately wait for FT8CN and X6100 to communicate wirelessly

请耐心，XIEGU的新固件一定会支持FT8CN+WLAN的。期待x6100新固件的发布。

from ft8cn.

hi, @djbr1

谢谢您提供的信息！我已经把此消息提供给XIEGU，希望能够有帮助！

谢谢！

bg7yoz

from ft8cn.

I'm having the same problem, no transmit audio, using X6100 fw v1.1.6 with FT8CN v.90. Going to try a factory reset. If that fails I'll reluctantly reflash with v1.1.7, fingers crossed.

from ft8cn.

Update:

Remaining on FT8CN v.90 I performed a factory reset which resulted in no change.
I flashed the radio with the new FW 1.1.7 (8/31/23), performed a factory reset as suggested here, and that solved the issue.
I think I'll stay with v.90 for the time being. If it ain't broke no more, don't fix it.

from ft8cn.

Update:

Remaining on FT8CN v.90 I performed a factory reset which resulted in no change. I flashed the radio with the new FW 1.1.7 (8/31/23), performed a factory reset as suggested here, and that solved the issue. I think I'll stay with v.90 for the time being. If it ain't broke no more, don't fix it.

建议使用0.91，因为0.91解决了一些已知的问题。

bg7yoz

from ft8cn.

I read the v.91 release notes and will probably update.
Thanks for commenting and for this excellent app.

from ft8cn.

hi, @djbr1 , @Rafltdcpa

关于XIEGU X6100在FT8CN使用网络模式无发射音频的问题，已经查到了问题的原因了：
是X6100固件的一个bug：在L-DIG和U-DIG模式切换时，音频路径选择出了问题。
这个bug已经反映给XIEGU，XIEGU已经针对这个问题做了改正。相信在XIEGU新的固件发布后，会解决此问题。

73！

bg7yoz

from ft8cn.

FYI, I upgraded to v .91 a few weeks ago and the CAT and transmit audio seem to be working fine with the R1CBU alternate firmware. I believe that was also the case with the stock Xiegu firmware.

from ft8cn.

FYI, I upgraded to v .91 a few weeks ago and the CAT and transmit audio seem to be working fine with the R1CBU alternate firmware. I believe that was also the case with the stock Xiegu firmware.

Hello,
Using FT8CN with usb cable has no TX issues. My problem is related to WLAN connection from Android to X6100, where FT8CN connects wirelessly to WFserver on X6100.
I am not using USB cable as X6100 is draining power from Android phone battery, this is a flaw (or feature) of USB OTG connectivity
Thats why I desperately wait for FT8CN and X6100 to communicate wirelessly

from ft8cn.

from ft8cn.

With regard to the draining of the phone battery see the pic attached. I'm using a Samsung Note 8 which has a usb C port. The splitter is a usb C male to usb A female/usb A female. This allows for CAT control and the simulcharging of the phone.

from ft8cn.

Typo correction....the splitter is usb C male to usb A female/ usb C female ( not usb A).

from ft8cn.

Hello,
I also have split OTG cable. It provides power to phone, however it does not prevent X6100 from draining from phone :(
BTW, it is X6100 behaviour with all attached devices (laptop, PC), approx 100-200 mA are drained from attached USB.
If you have current meter on your power supply, you can notice the difference in consumption when USB is attached or not
73 HB9TXB
NB: you can join discord server where x6100 is dissected past two years ( https://discord.gg/VD4AsYJH )

from ft8cn.

The power supply I use is just a simple 12v/10amp wall brick with no indicators so if there is a current drain I haven't noticed it. The phone always reflects a battery charge of 100%.
I would be curious to know if, when you used the X6100 with the usb cable and experienced the phone current drain, if the radio was using external power or battery power and, if battery power, was the charger set to on or off.

from ft8cn.

Hi @Rafltdcpa

I made measurement from my 12V/30A power supply, ampermeter precision is 0.1

Drain of 0.2 A from USB is visible in all scenarios

As I do not have ampermeter for USB cables, it was not possible to measure drain when X6100 runs on battery

73

from ft8cn.

Hi @bg7yoz
If you have contact with Xiegu developers, please ask when new FW will be released.
thanks

请耐心，XIEGU的新固件一定会支持FT8CN+WLAN的。期待x6100新固件的发布。

from ft8cn.