so with the new version of raspistill/vid the -t option has changed.
a -t 0 will continuously take pictures/video whereas your code is assuming
this to mean dont wait at all. Using -t 1 for a 1 millisecond wait is good enough
it seems.

also when calling setup_camera the part that checks to see if the raspivid is
working (with -t 1) returns something other then your python is expecting.
So it always thinks it fails. I just commented out the checks and all
is well.

i just follow the "INSTALLATION INSTRUCTIONS " to do the berryio function ,when it comes to the last step ,i input "sudo berryio email_ip" system comes errors like this:
pi@raspberrypi ~ $ sudo berryio email_ip
msmtp: authentication failed (method PLAIN)
msmtp: server message: 535-5.7.8 Username and Password not accepted. Learn more at
msmtp: server message: 535 5.7.8 http://support.google.com/mail/bin/answer.py?answer=14257 q4sm50897126pba.12 - gsmtp
msmtp: could not send mail (account default from /etc/msmtprc)
ERROR: Email could not be sent, please check your logs

is there anyone can help me? thanks!

I got this error when i try to install berryio

Invalid command 'php_admin_value', perhaps misspelled or defined by a module not included in the server configuration ...fail!

Searching for help i found out that i need to install additional package libapache2-mod-php5 for this to work. When i instaled it, i sucessfuly instaled berryio

Hi, I have installed berryio on a Raspberry Pi B+, latest Raspbian, fully updated. I followed the berryio install instructions. I have a Slice of Relay board installed. I can activate the relays using the command line:
sudo berryio gpio_set_mode 24 out; sudo berryio gpio_set_value 24 1; sudo berryio gpio_set_value 24 0
but when I access the web page I can get no response from the GPIO Status GUI elements. Although I get an indication that 'Not In Use', 'In' and 'Out' are clickable, when I click them nothing happens.
I have looked at the /etc/berryio/gpio.php but I can't see where to edit the In/Out status. When I use the gpio_set_mode command nothing seems to be saved; I have to repeat the command after a reboot.
I have javascript enabled in browser. The rest of the graphic elements (e.g. 'System') seem to work OK. Can you give me an idea what I need to do to get the GPIO Status GUI to work?
Thanks for this very useful programme.
Thanks, Ken

Another error, now with GPIO from web.

[Wed Jul 24 17:18:45 2013] [error] [client 192.168.1.102] PHP Warning: file_get_contents(/sys/class/gpio/gpio8/direction): failed to open stream: Permission denied in /usr/share/berryio/includes/functions/gpio.php on line 139, referer: http://192.168.1.106:81/welcome

I'm accessing from another PC on same network (192.168.1.102 is that pc) and raspbery have different IP on same network (106)

I need to rip down a raspberry pi and remove Berryio without having to do a clean install. The usual

sudo apt-get uninstall berryio

obviously doesn't work, and Debian and I aren't that familiar to be able to figure out the uninstall process. I like having the pi's email me on wakeup, but I have some conflicts to resolve, so would like to have an uninstall process. thanks

It's awesome that the repository has a file that sets the guidelines for contributing (CONTRIBUTING_CODE.README.txt).

However, since there is a movement which tries to standardize a CONTRIBUTE.MD file and GitHub also treats it well I believe it would make sense to move this file to at least CONTRIBUTING and also consider whether it would not make sense to convert that file to Markdown for better readability and nicer output on GitHub.

I'm trying to add momentary-on (pulse output) support for GPIO pins.
This is to replace a function that was available in WebIOPi.
I use to to momentarily close a relay that simulates pressing a button. One click should send a momentary pulse.

So, I'm trying to tweak the images and code. I want to change the GPIO mode switches to be four-way switches instead of three-way switches, to include a momentary-out option.
Anybody have the source (Photoshop/Gimp?) images for those in usr\share\berryio\www\images\gpio\mode ?

Or, is there a better way to do this?

There was a mistake in the install script in version 1.5.1 which meant it neglected to create the empty log file directories. This caused a problem when starting Apache and possibly msmtp (used for emails).

I have just fixed this, apologies if you tried to install BerryIO during the first week of January and it failed, please follow the instructions in here and try the installation again:
https://github.com/NeonHorizon/berryio/blob/master/INSTALL.README.txt

If you were upgrading this bug will not have affected you.

I have been running this on a couple of Pis and it happens on all of them.
After running Berryio for a while, I have to refresh the page to get updated Memory data.

It` seems to be working with php7.0 and Ubuntu Mate 16.04(.02 in my case). Just had to change the paths and the names of the packages into the install script. (Sorry, the code tag isn't working with this ahah) [EDIT] I've fixed the Markdown :)

apt-get -y install ethtool wireless-tools msmtp apache2 php libapache2-mod-php pwauth git || { echo -e "Install failed!" 1>&2; exit 1; }

echo -e "\nRemoving any old copies of BerryIO...."
rm -fr /usr/share/berryio || { echo -e "Install failed!" 1>&2; exit 1; }

echo -e "\nRetrieving latest copy of BerryIO from GitHub...."
git clone https://github.com/NeonHorizon/berryio.git /usr/share/berryio/

echo -e "\nCopying in the default config...."
cp -R /usr/share/berryio/default_config/berryio /etc || { echo -e "Install failed!" 1>&2; exit 1; }
cp -R /usr/share/berryio/default_config/apache2 /etc || { echo -e "Install failed!" 1>&2; exit 1; }
cp /usr/share/berryio/default_config/php5/apache2/conf.d/* /etc/php/7.0/apache2/conf.d || { echo -e "Install failed!" 1>&2; exit 1; }
cp /usr/share/berryio/default_config/php5/cli/conf.d/* /etc/php/7.0/cli/conf.d || { echo -e "Install failed!" 1>&2; exit 1; }

I think you can simply adapt the script, put a switch to know on wich OS you are installing it, and it will work fine as expected. Anyway this could be a "wishlist" label.

After several good installs on stretch, I'm finding the Rpi4 doesn't want to work.

Hello,

I'm using BerryIO + the nicholas smartapp

I was able to duplicate the reboot tile which launches api_command/reboot

I replced it with another command api_commnd/sudo ps4-waker

But its not working...

Can you please help point out what should I do?>

Just to note that BerryIO isn't working with the new PHP 7.4. Per the fix noted for 7.3, you must now run the below and restart the Pi.

sudo cp /etc/php/7.0/apache2/conf.d/berryio.ini /etc/php/7.4/apache2/conf.d/berryio.ini

sudo cp /etc/php/7.0/apache2/conf.d/msmtp.ini /etc/php/7.4/apache2/conf.d/msmtp.ini

sudo cp /etc/php/7.0/cli/conf.d/berryio.ini /etc/php/7.4/cli/conf.d/berryio.ini

sudo cp /etc/php/7.0/cli/conf.d/msmtp.ini /etc/php/7.4/cli/conf.d/msmtp.ini

When i run "berryio" it just prints the file on the terminal... i examine the file and it looks to be a php file with no <?php tag at the beggining... only <?

My understanding of php is that if there is no <?php tag it will interpret at html and thus just print the file. I examined more of the .php files and non of them have the opening tag. Please explain, im sure I am missing something.

i am trying to install berryio on my pi3. have done sudo apt-get update and sudo apt-get upgrade, installed apache2, but when i try and run the berryio_install.sh as per the installation instructions in the INSTALL.README.txt
I get the following output in terminal.

pi@TankPi:~ $ chmod +x berryio_install.sh
pi@TankPi:~ $ sudo ./berryio_install.sh

BerryIO Installer

Installing the prerequisites....
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package php5 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

Package libapache2-mod-php5 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'php5' has no installation candidate
E: Package 'libapache2-mod-php5' has no installation candidate
Install failed!

Can i get some help please

Hi,
after installing Berryio on RPI B and 2B (Jessie, with kernel 4.1.13 from November 2015)
GPIO access via web interface works fine. Second Step, applying camera_setup.
Camera works fine but GPIO Access via Web is no longer possible. No reaction, no change on
web site.

With user pi on console I can modify gpio ports with berryio commands.

Seems to be a grant problem for www-data after doing "sudo berryio camera_setup".
www-data is still member of gpio.

Every time I re-run installing berryio and camera-setup, same result.

Any idea?

Thanks
Ludger

The CONTRIBUTING_CODE.README is missing some steps as I didn't realise that 3rd parties have to set up their own separate repo and a pull request rather than simply push a branch into the main repo. wdjc100 has kindly offered to work with me on this to correct it.