A proper README will come, for the moment some fragmented information below.

• Download the Raspberry Imager and install the desktop version https://www.raspberrypi.org/downloads/

• Enable SSH (guide)

touch /Volumes/boot/ssh

• Configure WiFi

• https://www.raspberrypi.org/documentation/configuration/wireless/headless.md

• https://learn.adafruit.com/adafruits-raspberry-pi-lesson-3-network-setup/setting-up-wifi-with-occidentalis

vim /Volumes/boot/vim wpa_supplicant.conf

And copy the following configuration inside, remember to update the values:

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=De

network={
 ssid="<SSID>"
 psk="<PASSWORD>"
 scan_ssid=1
}

• Boot up your Pi

• add ssh key

ssh [email protected]

ssh-copy-id [email protected]

Or if you wanna use a custom key:

1. copy the key in the ~/.ssh/authorized_keys

cat ~/.ssh/id_raspi_rsa.pub | ssh [email protected] 'mkdir -p ~/.ssh && cat >> ~/.ssh/authorized_keys'

2. Add the new key locally to the agent

ssh-add ~/.ssh/id_raspi_rsa

• Stop the mechanical voice by following the welcome message

https://raspberrypi.stackexchange.com/questions/118911/how-do-i-stop-the-audio-message-to-install-the-screen-reader-press-control-alt

• Apparently, with the latest Buster version the waveshare is properly setup.

• Enabling VNC:

  • follow the instruction: https://www.raspberrypi.org/documentation/remote-access/vnc/

• Potentially change host name link

• Find your IP link

It should be the default, otherwise enable it manually