nitaybz / homebridge-onkyo-pioneer Goto Github PK

This initially worked great, but after 2 days this plugin became unresponsive. Two things happened that may have caused it.

1. I had disabled a few sources and renamed one as well
2. The IP address on the receiver changed

I am now unable to add the receiver in Homekit.

I am receiving an error, which is:
This plugin generated a warning from the characteristic 'Volume': characteristic was supplied illegal value: number 108 exceeded maximum of 100. See https://git.io/JtMGR for more info.

Again, thank you very much for the great plugin.

One issue I have is that the zone 2 in home app shows On when it is off. This is what happens: turn on zone 2 works fine, home app show on. Turning Zone 2 off does switch zone 2 off. For one second the Home app shows zone 2 off but than it shows on but actually zone 2 is off.

Do you know what the issue could be. Thanks in advance.

[2/9/2021, 8:04:22 PM] [OnkyoPioneer] Onkyo - Getting State
[2/9/2021, 8:04:23 PM] [OnkyoPioneer] Onkyo - Got New State: {"power":1,"volume":47,"mute":false,"source":3}
[2/9/2021, 8:04:26 PM] [OnkyoPioneer] Onkyo Zone 2 - Getting State
[2/9/2021, 8:04:27 PM] [OnkyoPioneer] Error: Onkyo does not support ZVL command
[2/9/2021, 8:04:27 PM] [OnkyoPioneer] ERROR OCCURRED: RX: unknown event: Error: Onkyo does not support ZVL command
[2/9/2021, 8:04:31 PM] [OnkyoPioneer] SubError [TimeoutError]: Timeout when sending: !1ZVLQSTN
at afterTimeout (/usr/local/lib/node_modules/homebridge-onkyo-pioneer/node_modules/bluebird/js/release/timers.js:49:15)
at Timeout.timeoutTimeout [as _onTimeout] (/usr/local/lib/node_modules/homebridge-onkyo-pioneer/node_modules/bluebird/js/release/timers.js:76:13)
at listOnTimeout (internal/timers.js:554:17)
at processTimers (internal/timers.js:497:7)
[2/9/2021, 8:04:31 PM] [OnkyoPioneer] ERROR OCCURRED: Timeout when sending: !1ZVLQSTN
[2/9/2021, 8:04:31 PM] [OnkyoPioneer] Could NOT get state from "Onkyo Zone 2" : Timeout when sending: !1ZVLQSTN
[2/9/2021, 8:04:31 PM] [OnkyoPioneer] Onkyo Zone 2 - found cached state in storage
[2/9/2021, 8:04:31 PM] [OnkyoPioneer] Onkyo Zone 2 - Turning OFF
[2/9/2021, 8:04:33 PM] [OnkyoPioneer] Onkyo Zone 2 - Getting State
[2/9/2021, 8:04:33 PM] [OnkyoPioneer] Error: Onkyo does not support ZVL command
[2/9/2021, 8:04:33 PM] [OnkyoPioneer] ERROR OCCURRED: RX: unknown event: Error: Onkyo does not support ZVL command
[2/9/2021, 8:04:37 PM] [OnkyoPioneer] SubError [TimeoutError]: Timeout when sending: !1ZVLQSTN
at afterTimeout (/usr/local/lib/node_modules/homebridge-onkyo-pioneer/node_modules/bluebird/js/release/timers.js:49:15)
at Timeout.timeoutTimeout [as _onTimeout] (/usr/local/lib/node_modules/homebridge-onkyo-pioneer/node_modules/bluebird/js/release/timers.js:76:13)
at listOnTimeout (internal/timers.js:554:17)
at processTimers (internal/timers.js:497:7)
[2/9/2021, 8:04:37 PM] [OnkyoPioneer] ERROR OCCURRED: Timeout when sending: !1ZVLQSTN
[2/9/2021, 8:04:37 PM] [OnkyoPioneer] Could NOT get state from "Onkyo Zone 2" : Timeout when sending: !1ZVLQSTN
[2/9/2021, 8:04:37 PM] [OnkyoPioneer] Onkyo Zone 2 - found cached state in storage
[2/9/2021, 8:04:49 PM] [OnkyoPioneer] Onkyo Zone 2 - Turning OFF
[2/9/2021, 8:04:51 PM] [OnkyoPioneer] Onkyo Zone 2 - Getting State
[2/9/2021, 8:04:51 PM] [OnkyoPioneer] Error: Onkyo does not support ZVL command
[2/9/2021, 8:04:51 PM] [OnkyoPioneer] ERROR OCCURRED: RX: unknown event: Error: Onkyo does not support ZVL command
[2/9/2021, 8:04:53 PM] [OnkyoPioneer] Onkyo - Getting State
[2/9/2021, 8:04:53 PM] [OnkyoPioneer] Onkyo - Got New State: {"power":1,"volume":47,"mute":false,"source":3}
[2/9/2021, 8:04:55 PM] [OnkyoPioneer] SubError [TimeoutError]: Timeout when sending: !1ZVLQSTN
at afterTimeout (/usr/local/lib/node_modules/homebridge-onkyo-pioneer/node_modules/bluebird/js/release/timers.js:49:15)
at Timeout.timeoutTimeout [as _onTimeout] (/usr/local/lib/node_modules/homebridge-onkyo-pioneer/node_modules/bluebird/js/release/timers.js:76:13)
at listOnTimeout (internal/timers.js:554:17)
at processTimers (internal/timers.js:497:7)
[2/9/2021, 8:04:55 PM] [OnkyoPioneer] ERROR OCCURRED: Timeout when sending: !1ZVLQSTN
[2/9/2021, 8:04:55 PM] [OnkyoPioneer] Could NOT get state from "Onkyo Zone 2" : Timeout when sending: !1ZVLQSTN
[2/9/2021, 8:04:55 PM] [OnkyoPioneer] Onkyo Zone 2 - found cached state in storage
[2/9/2021, 8:04:57 PM] [OnkyoPioneer] Onkyo Zone 2 - Getting State
[2/9/2021, 8:04:57 PM] [OnkyoPioneer] Error: Onkyo does not support ZVL command
[2/9/2021, 8:04:57 PM] [OnkyoPioneer] ERROR OCCURRED: RX: unknown event: Error: Onkyo does not support ZVL command
[2/9/2021, 8:05:01 PM] [OnkyoPioneer] SubError [TimeoutError]: Timeout when sending: !1ZVLQSTN
at afterTimeout (/usr/local/lib/node_modules/homebridge-onkyo-pioneer/node_modules/bluebird/js/release/timers.js:49:15)
at Timeout.timeoutTimeout [as _onTimeout] (/usr/local/lib/node_modules/homebridge-onkyo-pioneer/node_modules/bluebird/js/release/timers.js:76:13)
at listOnTimeout (internal/timers.js:554:17)
at processTimers (internal/timers.js:497:7)
[2/9/2021, 8:05:01 PM] [OnkyoPioneer] ERROR OCCURRED: Timeout when sending: !1ZVLQSTN
[2/9/2021, 8:05:01 PM] [OnkyoPioneer] Could NOT get state from "Onkyo Zone 2" : Timeout when sending: !1ZVLQSTN
[2/9/2021, 8:05:01 PM] [OnkyoPioneer] Onkyo Zone 2 - found cached state in storage

success installed on raspberry pi and is showing on Homebridge web interface and I can control but not showing on home app.

Hi is it possible to how HomeKit discover the receiver? Instead as a speaker ? I got issue when I ask Siri to play music , she tell me she can’t find speakers. Thank you

I have an amplifier that does not allow for networked standby. It does, however, have a wired remote interface that also allows it to be powered on and off. I connected an Arduino to that port that is connected to my HomeBridge server. So far, I have a separate homebridge device set up to run a bash script that powers on my amplifier. Is it conceivable to add an optional config parameter to point to a script that, if provided, would execute instead of avr.pwrOn?

Thanks very much for the excelent plugin. Works great with my Onkyo TX-NR5010. Have got two devices, zone 1 and zone2 with volume and input control!!

It is working but the log shows one error message. Not sure what it means or it does something.

[1/8/2021, 11:47:36 AM] [OnkyoPioneer] Error: Onkyo does not support ZVL command
[1/8/2021, 11:47:36 AM] [OnkyoPioneer] ERROR OCCURRED: RX: unknown event: Error: Onkyo does not support ZVL command
[1/8/2021, 11:47:40 AM] [OnkyoPioneer] SubError [TimeoutError]: Timeout when sending: !1ZVLQSTN
at afterTimeout (/usr/local/lib/node_modules/homebridge-onkyo-pioneer/node_modules/bluebird/js/release/timers.js:49:15)
at Timeout.timeoutTimeout [as _onTimeout] (/usr/local/lib/node_modules/homebridge-onkyo-pioneer/node_modules/bluebird/js/release/timers.js:76:13)
at listOnTimeout (internal/timers.js:554:17)
at processTimers (internal/timers.js:497:7)
[1/8/2021, 11:47:40 AM] [OnkyoPioneer] Could NOT get state from "Onkyo Zone 2" : Timeout when sending: !1ZVLQSTN
[1/8/2021, 11:47:40 AM] [OnkyoPioneer] ERROR OCCURRED: Timeout when sending: !1ZVLQSTN
[1/8/2021, 11:47:40 AM] [OnkyoPioneer] Onkyo Zone 2 - found cached state in storage
[1/8/2021, 11:48:05 AM] [OnkyoPioneer] Onkyo - Getting State
[1/8/2021, 11:48:05 AM] [OnkyoPioneer] Onkyo Zone 2 - Getting State
[1/8/2021, 11:48:06 AM] [OnkyoPioneer] Onkyo - Got New State: {"power":0,"volume":53,"mute":false,"source":3}
[1/8/2021, 11:48:06 AM] [OnkyoPioneer] Error: Onkyo does not support ZVL command
[1/8/2021, 11:48:06 AM] [OnkyoPioneer] ERROR OCCURRED: RX: unknown event: Error: Onkyo does not support ZVL command

I'm getting this output in my logs every 30 seconds

[9/23/2021, 5:43:30 PM] [homebridge-onkyo-pioneer] This plugin generated a warning from the characteristic 'Volume': characteristic was supplied illegal value: number 108 exceeded maximum of 100. See https://git.io/JtMGR for more info.
[9/23/2021, 5:44:00 PM] [homebridge-onkyo-pioneer] This plugin generated a warning from the characteristic 'Volume': characteristic was supplied illegal value: number 108 exceeded maximum of 100. See https://git.io/JtMGR for more info.
[9/23/2021, 5:44:30 PM] [homebridge-onkyo-pioneer] This plugin generated a warning from the characteristic 'Volume': characteristic was supplied illegal value: number 108 exceeded maximum of 100. See https://git.io/JtMGR for more info.
[9/23/2021, 5:45:00 PM] [homebridge-onkyo-pioneer] This plugin generated a warning from the characteristic 'Volume': characteristic was supplied illegal value: number 108 exceeded maximum of 100. See https://git.io/JtMGR for more info.
[9/23/2021, 5:45:30 PM] [homebridge-onkyo-pioneer] This plugin generated a warning from the characteristic 'Volume': characteristic was supplied illegal value: number 108 exceeded maximum of 100. See https://git.io/JtMGR for more info.
[9/23/2021, 5:46:00 PM] [homebridge-onkyo-pioneer] This plugin generated a warning from the characteristic 'Volume': characteristic was supplied illegal value: number 108 exceeded maximum of 100. See https://git.io/JtMGR for more info.```

I’m getting constant timeout errors. It seems to come and go and I’m not sure why. Relevant section of log below:

[2/9/2021, 11:17:48 AM] [OnkyoPioneer] AV Receiver - Getting State
[2/9/2021, 11:17:52 AM] [OnkyoPioneer] SubError [TimeoutError]: Timeout when sending: !1PWRQSTN
at afterTimeout (/homebridge/node_modules/homebridge-onkyo-pioneer/node_modules/bluebird/js/release/timers.js:49:15)
at Timeout.timeoutTimeout [as _onTimeout] (/homebridge/node_modules/homebridge-onkyo-pioneer/node_modules/bluebird/js/release/timers.js:76:13)
at listOnTimeout (internal/timers.js:554:17)
at processTimers (internal/timers.js:497:7)
[2/9/2021, 11:17:52 AM] [OnkyoPioneer] Could NOT get state from "AV Receiver" : Timeout when sending: !1PWRQSTN
[2/9/2021, 11:17:52 AM] [OnkyoPioneer] AV Receiver - found cached state in storage
[2/9/2021, 11:17:52 AM] [OnkyoPioneer] ERROR OCCURRED: Timeout when sending: !1PWRQSTN

The plug-in is running but I can't add the receiver to HomeKit. After putting in the setup code, HomeKit is searching forever. Shouldn't the setup code be a unique number for the device? In my case it seems, that the setup code is the same as the Homebridge code.

[26/03/2021, 10:46:11] Please add [Onkyo 7781] manually in Home app. Setup Code: 031-45-154

I've configured a home scene, where my Onkyo AVR and my NVidia Shield (through adb) turned on. It work's well but about 7 seconds after triggering the scene, the source of the AVR is changed to a wrong input (TV).

That's strange, because the TV Input is not even assigned.

Maybe someone could help me. Thanks!

I have this app working and able to turn on/off the receiver, and added to my HomeKit. But how do I change the volume? I don't see that in HomeKit. I see I can change the inputs, but not the volume. Thanks in advance for your assistance.

Hello,

Good to know that someone decided to write a new plugin, I hope as a true "AV Receiver" accessory ? 🙂
I tried to install it and configure my Pioneer VSX-1123-K but it was not recognized.

It's working with other Pioneer plugins and via the Pioneer Remote App.

Wishing all good for your work, thanks !

Regards