nlkguy / archer-t2u-plus-linux Goto Github PK
View Code? Open in Web Editor NEWTP-Link Archer T2U Plus / AC600 High Gain USB Wifi Adapter Review & Driver installation Guide for various platforms.
Home Page: https://TechBuy.in
TP-Link Archer T2U Plus / AC600 High Gain USB Wifi Adapter Review & Driver installation Guide for various platforms.
Home Page: https://TechBuy.in
I've been trying to figure this out for a while and i can't find a solution, my router ONLY has 5ghz support and has zero way of changing it to 2.4ghz is there anything that can be done to fix this or do i need to find a new WIFI adapter?
Since Android is technically Linux, could you compile this driver on a rooted device and use it with a USB-A to USB-C adapter?
The only thing stopping you is the lack of kernel headers, which I'm not sure where to get. But Raspberry Pi and Kali ARM have their own compatible kernel headers, so could this be possible?
When I type: "sudo make dkms_install", I get this:
mkdir -p /usr/src/8812au-5.6.4.2_35491.20191025
cp -r * /usr/src/8812au-5.6.4.2_35491.20191025
dkms add -m 8812au -v 5.6.4.2_35491.20191025
Creating symlink /var/lib/dkms/8812au/5.6.4.2_35491.20191025/source ->
/usr/src/8812au-5.6.4.2_35491.20191025
DKMS: add completed.
dkms build -m 8812au -v 5.6.4.2_35491.20191025
Error! echo
Your kernel headers for kernel 5.10.17-v7+ cannot be found at
/lib/modules/5.10.17-v7+/build or /lib/modules/5.10.17-v7+/source.
make: *** [Makefile:2304: dkms_install] Error 1
Where can I find the correct kernel headers?
I have installed all the drivers for ubuntu 20.04 but it is not working on my system. I also reinstalled it but the same problem is happening. So, help me regarding this.
According to multiple sites, eg https://deviwiki.com/wiki/TP-LINK_Archer_T2U_Plus, the T2U Plus uses the RTL8811AU chipset, not the one described in the README here.
When using this driver, my adapter fails to see 5G networks. Using this one, everything works.
So, a pretty big deal as this name and README for this project seems to be wrong.
Error! Bad return status for module build on kernel: 5.15.30-v8+ (aarch64)
Consult /var/lib/dkms/8812au/5.6.4.2_35491.20191025/build/make.log for more information.
make: *** [Makefile:2304: dkms_install] Error 10
$ sudo make dkms_install
mkdir: created directory '/usr/src/8812au-5.6.4.2_35491.20191025'
cp -r * /usr/src/8812au-5.6.4.2_35491.20191025
dkms add -m 8812au -v 5.6.4.2_35491.20191025
Creating symlink /var/lib/dkms/8812au/5.6.4.2_35491.20191025/source ->
/usr/src/8812au-5.6.4.2_35491.20191025
DKMS: add completed.
dkms build -m 8812au -v 5.6.4.2_35491.20191025
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area...
'make' -j2 KVER=5.10.142-antix.2-amd64-smp KSRC=/lib/modules/5.10.142-antix.2-amd64-smp/build.......................(bad exit status: 2)
Error! Bad return status for module build on kernel: 5.10.142-antix.2-amd64-smp (x86_64)
Consult /var/lib/dkms/8812au/5.6.4.2_35491.20191025/build/make.log for more information.
make: *** [Makefile:1784: dkms_install] Error 10
ERROR:
make dkms_install
mkdir: created directory '/usr/src/8812au-5.6.4.2_35491.20191025'
cp -r * /usr/src/8812au-5.6.4.2_35491.20191025
dkms add -m 8812au -v 5.6.4.2_35491.20191025
Creating symlink /var/lib/dkms/8812au/5.6.4.2_35491.20191025/source ->
/usr/src/8812au-5.6.4.2_35491.20191025
DKMS: add completed.
dkms build -m 8812au -v 5.6.4.2_35491.20191025
Error! echo
Your kernel headers for kernel 5.15.44-Re4son+ cannot be found at
/lib/modules/5.15.44-Re4son+/build or /lib/modules/5.15.44-Re4son+/source.
make: *** [Makefile:1790: dkms_install] Error 1
tried the troubleshoot method mentioned but same issue
How do I set the SSID and password for it in my terminal? This is with a raspberry pi 3 with inbuilt WiFi as well as my to link adapter.
Thanks in advance.
Hey, new ubuntu 20.4 user here!
So, Installed the Dirver but immedietly after the resolution changed and stuck at 1024X768 & no other options are available.
Please tell me how to fix this.
Thanks.
My wifi adapter worked fine but after the kernel update it just shows the wifi connection as available but the adapter doesnt see any networks
I'm trying to use iwd to see if anything appears when i scan the networks with the device but i have the same result. Important to mention that iwd was enabled and running when i took these screenshots
Keep it in mind that i have at least 5 networks that appear on other devices that dont run linux
I have updated my kali to 2024.1 to 2024.2 but after that my it's showing wifi icon but not any available wifi my adaptor is fully fine it's working on windows so i guess it's driver issues
└─$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
usb0 no wireless extensions.
wlan0 unassociated ESSID:"" Nickname:"WIFI@REALTEK"
Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
┌──(kalihunter㉿kali)-[~]
└─$ dkms status
8812au/5.6.4.2_35491.20191025, 6.8.11-amd64, x86_64: installed
Here you can see it's showing Link Quality:0 but in previous version kali 2024.1 it used to show like 0/100 something like this. and was working fine every attacks. but this isn't working you can see attachments my adaptor is connected i'm using dual boot i even tried in virtual box but it's not working there too.
So how to fix this or driver need to be updated or what??? i'd appreciate your help
the driver is not working in kernel v5.10.xxx for ARM despite using correct kernel headers
the DKMS install is completed successfully, but the driver refuses to load on startup.
tried in both kali and raspbian (buster).
Hi,
this is not an issue, just want to seek information on which OS and kernel versions are best to run monitor mode for the TPlink archer t2u dongle.
I need to run monitor mode on VMware, I can run any OS or kernel versions that would suffice.
Thanks,
Shahab
I finished the process but know what do I do, I dont see my adapter necessarily
Hi, i have successfully installed this driver in Raspberry Pi 4 running Ubuntu 20.10 64-bit.
But I don't have the wifi adapter, since I decided to go for a later model, (Archer T3U plus).
So i was wondering if i should to prevent any conflict, delete this driver for T2U plus before I install anything else.
Thank you guys... u made the steps very easy to follow..
preciso baixar 0 B/94,3 MB de arquivos.
Depois desta operação, 325 MB adicionais de espaço em disco serão usados.
Você quer continuar? [S/n] -> clico em sim e e trava em 91%
Media change: please insert the disc labeled
'Ubuntu 22.04.2 LTS Jammy Jellyfish - Release amd64 (20230223)'
in the drive '/media/cdrom/' and press [Enter] clico em enter e fica repetindo para clicar em [Enter]
Hi,
I use the archer t2u in an embedded application, in which I need to shutdown the Ubuntu 20.04 computer by cutting its power source.
If I cut power like this and then restart, the USB wifi dongle is not detected anymore. The LED of the antenna is not green. It is even not possible to make it work by unplugging and plugging it back. I need to perform several restart to recover it.
However if I do a clean reboot using shutdown/reboot commands, the driver is loaded and is able to detect the antenna successfully straight away.
Any idea of what could be wrong in the loading of the driver at boot ?
Other USB devices are always detected/working no matter how I reboot. Which makes me think it is related to Dmks
Thanks in advance,
Im on a kali linux virtual machine
"sudo make dkms_install" gives me this output
mkdir -p /usr/src/8812au-5.6.4.2_35491.20191025
cp -r * /usr/src/8812au-5.6.4.2_35491.20191025
dkms add -m 8812au -v 5.6.4.2_35491.20191025
Error! DKMS tree already contains: 8812au-5.6.4.2_35491.20191025
You cannot add the same module/version combo more than once.
make: *** [Makefile:2303: dkms_install] Error 3
"sudo dkms remove 8812au/5.6.4.2_35491.20191025 --all" gives me this
------------------------------
Deleting module version: 5.6.4.2_35491.20191025
completely from the DKMS tree.
------------------------------
Done.
"sudo make dkms_install" after running "sudo dkms remove 8812au/5.6.4.2_35491.20191025 --all" gives this
mkdir -p /usr/src/8812au-5.6.4.2_35491.20191025
cp -r * /usr/src/8812au-5.6.4.2_35491.20191025
dkms add -m 8812au -v 5.6.4.2_35491.20191025
Creating symlink /var/lib/dkms/8812au/5.6.4.2_35491.20191025/source ->
/usr/src/8812au-5.6.4.2_35491.20191025
DKMS: add completed.
dkms build -m 8812au -v 5.6.4.2_35491.20191025
Error! echo
Your kernel headers for kernel 5.10.0-kali3-amd64 cannot be found at
/lib/modules/5.10.0-kali3-amd64/build or /lib/modules/5.10.0-kali3-amd64/source.
You can use the --kernelsourcedir option to tell DKMS where it's located.
make: *** [Makefile:2304: dkms_install] Error 1
"sudo make dkms_install" again gives this
mkdir -p /usr/src/8812au-5.6.4.2_35491.20191025
cp -r * /usr/src/8812au-5.6.4.2_35491.20191025
dkms add -m 8812au -v 5.6.4.2_35491.20191025
Error! DKMS tree already contains: 8812au-5.6.4.2_35491.20191025
You cannot add the same module/version combo more than once.
make: *** [Makefile:2303: dkms_install] Error 3
"iwconfig" gives this
lo no wireless extensions.
eth0 no wireless extensions.
After the next Ubuntu 20.04 update, wifi no longer connects. There is a list of available wifi, there is a connection indication, but the connection itself does not occur. Everything works on windows 10. Please tell me what can be done
The drivers don't work for 5.17 kernel is it possible to update to match with upcoming kernels
┌──(kali㉿kali)-[~]
└─$ sudo apt install build-essential libelf-dev linux-headers-$(uname -r)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package linux-headers-6.1.0-kali7-amd64
E: Couldn't find any package by glob 'linux-headers-6.1.0-kali7-amd64'
How to fix this? I followed the guide step by step
i installed the driver.but still it not detecting
Hi,
I have tried using the Linux driver from this repo on Ubuntu 22 on VMWare with host running Windows 10 and it only captures 11bg rates. I don't even see Beacons coming.
Is there anything wrong in the hardware I have received?
I have also configured the monitor mode in channel-36, still see only 6 mbps packets in 5 GHz.
I have also tried with Kali-22 which comes with default driver for TPlink t2u on VMware, the behavior is identical and it only captures 11bg packets.
Any help here is much appreciated!
Here is a screenshot of the capture
Thanks,
Shahab
Does this adapter work with Orange PI 3 LTS running armbian os? I have already ordered it, so I hope it will also work.
Error ! DKMS Tree Already contains : 8812au-5.6.4.2_35491.20191025
you cannot add the same module/version combo more than once .
make : *** [ Makefile : 2316 : dkms_install ] error 3
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.