When I get the "meshState.bin" from A iphone and set the file to B iphone. about ios-nrf-mesh-library HOT 3 CLOSED

@zhubin1987 exactly, as @trusbe recommends, if both phones have the same unicast things will not work, since the sequence numbers will be invalid and probably lower than previous values which will lead to messages being always dropped.

the fix is to simply copy over the state file, and then go to settings and change the unicast address of the phone to a new unused value, after that things should work as expected :)

Thanks for the help @trusbe !

from ios-nrf-mesh-library.

Mobile phone unicast address must be different.

If the unicast addresses of the two phones are the same, you need to ensure that the nRFMeshSequenceNumber is incremented.

@zhubin1987

from ios-nrf-mesh-library.

@trusbe @mostafaberg thanks for your answers. It works well with both of your two ways.Thank you

from ios-nrf-mesh-library.