I has created a staking pool to stake NUT mine WBNB, but when all the steps done I found that there was no pool in my community subpage. Check the bug please.

Tron Address：TKWJ2pSN5ZjEDhuYYQprnHGf6F9TPTKRPd
Thanks

Click "Add Pool" and try to add staking for BSC Steem and Hive but nothing shows up inside the create new pool

OK won't work

Fill in Start Block and make Stop Block to 10 years later or something and mint amout 1000 and then Add -> Deploy gives me this Contract error.

I got this error when deleting & create a new pool

UI error when it shows me both my community and creates new community button.
TRON
TKunHEFfVntKKTc9TTf4Q8R5b15D4S8ott

When staking mining, only the coins deployed at creation time can be pledged, but BNB cannot be pledged, and the contract that requires pledged coins cannot be seen in the direct interface. So how to pledge, it seems that only the owner of the deployment can see Own token contract

Logo and poster are not saved, although they meet the requirements.

MacBook Pro (Retina, 13-inch, Early 2015), macOS Motnerey v12.1
Browser: Brave v1.34.80 Chromium: 97.0.4692.71 (x86_64)

Community link: https://test.nutbox.io/#/sub-community/home/?id=0xecf3325c1babea8d97af8e2d7b5989459c696d02

Step-by-step:

When specifying blocks, the calculated date is displayed. But I can't select blocks via date picker.

Bug Description :

1. Wallet address is visible even though Wallet is not connected.
2. The 'Manage Your Community' button is activated. So there are errors on the sub-page and functions.

Path :
main > Community
main > Crowdstaking
etc.

Case / Action / Input data :
case1.

case2.
main > Community > 'Manage Your Community' button click
and on the sub-page('setting' and 'add staking pool') and functions etc error

My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg

there is still a lot that needs to be fixed by the dev, after today's update did not provide a complete fix, I've added a Steem Hive pool and with a success notification but when reloading the site page all pools are gone, only the bsc pool is left

and I did the addition of the pool again, the notification message failed

Bug Description :
In the setting your asset distribution, If you delete it does not changed to the previous startblock datetime.

Path :
main > community (click) > create your community (click) > get started (click)

Case / Action / Input data :

1. 'Confirm Add' Click
   
2. 'Delete Icon' Click
   
3. it does not changed to the previous startblock datetime
   

My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg

there is a spelling error in the uploading community .
Correct spelling is upload

Bsc address -0x814713ad02cFCAB77f6D27A23d28D755387f5b49

Tron Address:
TKunHEFfVntKKTc9TTf4Q8R5b15D4S8ott

Bug Description :
Community Name And Community Link - Unlimited Inputs and Input Error.
Community Link - url validation not check

Path :
main > community (click) > Manage Your Community (click) > setting (click) > Community Information Edit (Click)

Case / Action / Input data :

1. input community name = 'Test Nutbox Community..' repeat
   input community link = 'Url Link..' repeat
   click 'Commit' button
   
2. information popup
   click 'Sign and...' Button
   
3. wallet sign popup
   
4. error
   

My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg

https://www.youtube.com/watch?v=0iBB9sVOWgA

When you try to initiate stake mining with a community using Nutbox Walnut, some people may experience the issue that prompt dialogue box does not pop up after clicking "Approve Contract" and proceed to signing the smart contract. You may open the web log (press F12 key on your keyboard) to try and figure out what went wrong. Here are some of the measures you can try if you encounter this issue:

1. Close all browsers and log in again at MetaMask and revisit the Nutbox Walnut page https://nutbox.io/#/community (this is probably what most people would do).
2. Pause or disable adblocks extensions on all Nutbox Walnut sites.
3. Switch MetaMask to other networks and then switch back again and re-try.
4. Clear browser cache and re-try (not likely to be useful but could try it as the last resort).
5. Try with another Ethereum wallet.

If you have tried all the measures above and it still didn't work, it is most likely that your MetaMask extension is having problems. Confirm this by trying to create a community or deploy a new asset:

https://www.youtube.com/watch?v=bUra4shcp_k

If you also cannot create a community or deploy new asset (i.e. prompt dialogue box does not pop up after clicking "Approve Contract" or "Deploy" and proceed to signing the smarrt contract), it's most likely that your MetaMask extension is having issues connecting to Ethereum networks.

The easiest solution to this issue is to uninstall your MetaMask extension and re-install it again.

TronLink Wallet Address: TPnz69xHLvySMzQjXD2XVFh4seUS8GPjct

Step 1: Click "Choose Token"

Step2: There are no items in the list of "Choose a token as cToken"

BSC address: 0x3E00B4C929Ec88F35F4cbA7421bcef25cE0e4Cf4

Community name : Ethereum's Army
Issuer's Address : 0x9cf8650D5F6B678454f35999510Ce6EF5c08145A
Can't harvest for Ethereum token at staking platform reason : different smart contract between nutbox site & pancakeswap

Bug Description :
First time connection - no default language is set.
I think it's normal to set it in English instead of null.

Path :
main

Case / Action / Input data :

My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg

社区用户在质押时。UI显示的余额与钱包的余额不一致。看起来似乎是UI界面写死成了固定值如图。

界面刷新后。显示又正常了。。

Tron:
TJWFcfbMdBGHozHegd2ppdBiyeVSUaPBLs

On the Issue page of GitHub, fill in the bug information as shown in the figure below. Usually, it is needed to provide the phenomenon of the bug and the steps to reproduce the bug. If it is a security related issue, please contact the Nutbox official members directly instead of recording it here.
Finally, don't forget to write down your Tron address.
TKnYLrzM2dxwjuV2XHnQ1vUNsGvSdDd7Xd

Bug Description :
In the setting your asset distribution, the Block Number is entered even if it is not a number.
And deploy submit error.

Path :
main > community (click) > create your community (click) > get started (click)

Case / Action / Input data :

1. input start block = '5410822abcd', input stop block = '6000000abcd'
   
2. saved start / stop block NaN, input stop block = 'abcdeg', input reward amount = 'abcdeg'
   
3. saved start / stop block NaN, click deploy button
   
4. error
   

My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg

Bug Description :
Community Balance/Community commision ratio - The alphabet 'e' or 'Hangul' is entered And It can be sent.
Commnuity Balance 'Confirm charge' Button - a typing error AS-IS : 'Confirm charfe'

Path :
main > community (click) > Manage Your Community (click) > setting (click) > Community Information

Case / Action / Input data :
Case 1 : input Community Balance = '1e2' And Click 'Confirm charge' Button > wallet sign popup open
'Confirm charge' Button - a typing error AS-IS : 'Confirm charfe'

Case 2 : input Community commision ratio = '1e' And Click 'Confirm charge' Button

My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg

No minimum and maximum values.
I have set the values for (Pass) Threshold 0,0000001. Saved.
The displayed value has become 0.
And fields have no limits for max values.

https://test.nutbox.io/#/manage-community/vote

Also the social info needs some sort of error check before update.

This twitter link will go to https://test.nutbox.io/@yuzuT#/
and other links are all weird

Bug Description :
Select Nut as community asset will cause error when you create your community

Path :
community -> create your community -> step 1: choose your community asset-> choose 'NUT' and fill other information-> deploy

My Tron Wallet Address :
TXxg4B63BwAScb6GWjAgJ7mjRTcjtPZURc

there was an error using the ratio recommended by the notification too

Tron address: THGTz5kbcWKTQBPqxBu7EudGUos6R1gQe3

Website slightly lags while connecting and while visiting staking/blog etc... And sometimes staking/blog and other options dont work properly we must tap 2-3 times on them and then it opens.. Hope u fix it
Thank u

TS6EZk1PemgR1NWvnE4C977NuLBjpxXgCL

I made a community and got a link: https://test.nutbox.io/#/sub-community/home/0x00514D1e
But the community was disappeared.
Also, when I made the community, I made a staking pool with STEEM delegation pool and CAKE staking pool.
I already checked it was completed, but there's no staking pool when I checked again.

side scroller option is not showing in windows ,not able to go through the bottom of the test.nutbox.io webpage in my laptop (windows).

CSS error.
Icon not should be styled with cursor:pointer. Or the icon should be added to the link
https://test.nutbox.io/#/sub-community/home/?id=0xc5712e020be401129a89babc71414d77A9908592

Link community to web3.0 dialog box scrolling down is not working fine and i am not able to click Explore communities button in iphone . Interface is also not seen properly . Hope nutbox team will solve the problem asap 🙂

BSC address-0x814713ad02cFCAB77f6D27A23d28D755387f5b49

Bug Description :
start block, stop block number Error when compared.

Path :
main > community (click) > create your community (click) > get started (click)

Case / Action / Input data :

1. input start block = '5410882', input stop block = '6000000', click 'confirm add' button
   
2. saved success, click delete icon
   
3. delete success, input stop block = '6000000', click 'confirm add' button
   
4. add error (tip noti)
   

My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg

In the community sidebar.
Pop-up notifications duplicate the specified text. They do not carry any semantic load. It would be more logical to display Transaction Hash and Вate.

sum of ratio is 100% but error message shows up

when create a new pool same error shows up too

I can clearly see the community on the home page, but click on “More”to see more information, but the hint does not exist,I’m sure there’s nothing wrong with my network,I tried it a few times, and it was..

Аfter inserting the address of the contract, the icon is not displayed

MacBook Pro (Retina, 13-inch, Early 2015), macOS Motnerey v12.1
Browser: Brave v1.34.80 Chromium: 97.0.4692.71 (x86_64)
2560 × 1600

Hi Nutbox Team,

I found that I could not create my own community blog.
When I click Edit then the page just turn to another one.
Please fix it.
Thanks

Bug Description :
In the setting your asset distribution, the Reward Amount is entered even if it is not a number.
And deploy submit error.

Path :
main > community (click) > create your community (click) > get started (click)

Case / Action / Input data :

1. input reward amount = 'abcd'
   

2. saved NaN(Not a Number)
   

3. click deploy button
   

4. error
   

My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg

I found a bug in DeployCommunityToken Section the bug is when u enter block Number properly it shows error please check it thank You !

Layout error. The content does not fit, there is no scrolling.

MacBook Pro (Retina, 13-inch, Early 2015), macOS Motnerey v12.1
Browser: Brave v1.34.80 Chromium: 97.0.4692.71 (x86_64)
2560 × 1600

Bug Description :

1. If the block numbers are long, they overlap.
2. In the setting your asset distribution, the Reward Amount is entered can't add it from the 7th time.
   If this is right, it would be nice to have an help message.

Path :
main > community (click) > create your community (click) > get started (click)

Case / Action / Input data :

1. Case1 : block numbers overlap
2. Case2 : enter 7th Reward Amount >> 'Confirm Add' Button doesn't enable.

My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg

Fill in the Governance form and click Submit but Server error every time on "Update"

Bug Description :
If you don't have a wallet or if you don't have a wallet connection, the page won't load normally.
Is this right?
The normal site displays the page normally and provides a wallet connetion button or guidance.
The same goes for Tronlink on Peanut Site.
That way, I can see how many people use it, how many communities there are.

Path :
main > Community
main > Crowdstaking
etc.

Case / Action / Input data :
case1 :

case2 :

My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg

Manage community page -> Asset -> click update and type in percentage and Confirm gets this error

this looks like just an icon issue

one icon goes to github
the other goes to facebook but the same icon

but still it needs some kind of validation

Bug Description :
If you select a network other than the 'Goerli Test' network, the page loads. So there are errors on the sub-page and functions.

Path :
main > Community
main > Crowdstaking
etc.

Case / Action / Input data :
case1

case2

My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg

Community => Member => Sidebar
The button with the text "Administrator" has the css attribute "cursor: pointer;", it is active, but it does not have any events. The event is missing or there must be another html-element (span,label..)

Community name : Etarbucks
Community Balance : 500,000 ETH
Issuer's Metamask address : 0xd6F3d7FDB639f86eea83051435F1b9BC799348f1
Bug description : Popping up 'Contract invocation error' sign before progress

[Situations & Pictures]

1. In case of creating new pool

2. In case of configuring pool ratio

3. In case of delegating asset(Staking)

I'm starting to understand that after going back and forth from various features there is still a lot that needs to be added to make it more perfect to run in order for the tesnet to work better when used by participants, every time I perform an action or various button clicks it can't be recovered or reset but it happens automatically permanent, what about after I generate token but want to delete or edit because there are some errors that need to be added it doesn't seem to be fixed? and when i want to create new token or new contract this user can't do it either