ohec / open-hardware-monitor Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/open-hardware-monitor
Automatically exported from code.google.com/p/open-hardware-monitor
System.NullReferenceException: Object reference not set to an instance of
an object.
at OpenHardwareMonitor.Hardware.Mainboard.Mainboard..ctor()
at OpenHardwareMonitor.Hardware.Mainboard.MainboardGroup..ctor()
at OpenHardwareMonitor.Hardware.Computer.Open()
at OpenHardwareMonitor.GUI.MainForm..ctor()
at OpenHardwareMonitor.Program.Main()
Original issue reported on code.google.com by [email protected]
on 8 Mar 2010 at 1:52
It is desirable to be able to run the program on multiple computers in
"service mode" and collect data from sensors at once from multiple
computers remotely.
Thank you!
Original issue reported on code.google.com by [email protected]
on 6 Apr 2010 at 5:36
New feature requested - "Run as a service".
Now, there is an option "Autorun". But this option is triggered when the
user login. I'd like setting "Run as a service" to run the program without
login of the user. Then you can connect from time to time to the computer
using RemoteAdmin and read sensors' values.
Thank you!
Original issue reported on code.google.com by [email protected]
on 6 Apr 2010 at 5:31
The complete exception message
---
System.IO.FileNotFoundException: Could not load file or assembly
'Aga.Controls, Version=1.7.0.0, Culture=neutral,
PublicKeyToken=fcc90fbf924463a3' or one of its dependencies. The system
cannot find the file specified.
File name: 'Aga.Controls, Version=1.7.0.0, Culture=neutral,
PublicKeyToken=fcc90fbf924463a3'
at OpenHardwareMonitor.GUI.MainForm..ctor()
at OpenHardwareMonitor.Program.Main()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind
failure logging.
To turn this feature off, remove the registry value
[HKLM\Software\Microsoft\Fusion!EnableLog].
---
I could neither identify the source of this error nor reproduce it. Maybe
trying to run the Open Hardware Monitor with "assembly bind failure
logging" enabled as described in the exception could give more hints about
what is going wrong.
Original issue reported on code.google.com by moel.mich
on 28 Apr 2010 at 9:32
If OHM is left open and then the machine is hibernated, it will hang on the
saving settings window, and never goes on to the black screen w/progress
bar. Windows XP 32 bit.
Original issue reported on code.google.com by [email protected]
on 26 Apr 2010 at 12:42
Hello !
Would be better to have a forum ....
I came to OpenHardwareMonitor, because usually, nothing fits my
needs:Monitor and optionally shut down my server, if temperature is too high.
The main cirumstance for this is, that usually no user is logged on. All
monitors I am aware of, are just starting in the users logon session.
I personally started with WingRing0 samples to make it by myself ...
But:OpenHardwareMonitor could be split into a service [you use .Net, which
means, this is really a no complicated task!] which is responsible for
monitoring and a user program, which just displays the values to any
persons, which are logged in in any session .... Especially a problem on
servers, which many times runs unattended.
Just my personal note.
Best regards!
++mabra
Original issue reported on code.google.com by [email protected]
on 26 Apr 2010 at 2:37
ADL_Overdrive5_CurrentActivity_Get can return the status ADL_OK even in
cases where only a part of the ADLPMActivity record is valid. If the ADL
reports a core voltage of 0.0 V, or a clock speed of 0 Mhz, then just
deactivate these sensors.
Original issue reported on code.google.com by moel.mich
on 10 Mar 2010 at 9:23
What steps will reproduce the problem?
1. Not really sure
2.
3.
What is the expected output? What do you see instead?
I've been using HWSensor and it detects the 4 cores of my cpu individually,
this doesn't. It does detect load indivually, just not temp. I didn't think
much of it until I saw the individual core temp on the screenshot of the
software so I began to wonder if it was a bug of some sort since I can't
find a setting for it.
What version of the product are you using? On what operating system?
0.1.23.2
Please provide any additional information below.
Phenom II x4 940 cpu on an Asus board. I'm not sure what info you requre so
just let me know..If this is normal for my system, ok.
Either way. This is very nice software and I will be switching from
HWmonitor as this provides more info and detects both my video cards which
is something HWmonitor was unable to do. So thanks!
Original issue reported on code.google.com by [email protected]
on 24 Feb 2010 at 1:16
What is the expected output? What do you see instead?
When shutting down I receive notification that OHM must be closed.
Also suspending machine causes OHM to shutdown, when machine is started
icons appear in tray but browsing other them causes them to disappear.
What version of the product are you using? On what operating system?
0.1.28 (all previous version don't display this behaviour).
Please provide any additional information below.
I have been migrating OpenHardwareMonitor.config from one version to the next.
Please attach an OpenHardwareMonitor.Report.txt, which can be created with
"File / Save Report" in the Open Hardware Monitor folder.
Original issue reported on code.google.com by [email protected]
on 4 Apr 2010 at 12:20
Attachments:
Sometimes the VCore displayed is incorrect. In a previous screenshot (Issue
#1) it was OK, now it's reading over 2V which is physically impossible.
Original issue reported on code.google.com by [email protected]
on 21 Feb 2010 at 4:30
Attachments:
What is the expected output? What do you see instead?
The program should be able to start when Windows starts up. We currently
manually start it up.
What version of the product are you using? On what operating system?
Latest version of Beta0.1.27. Windows 7
Please provide any additional information below.
Please ad an option "start with windows"
Please attach an OpenHardwareMonitor.Report.txt, which can be created with
"File / Save Report" in the Open Hardware Monitor folder.
Original issue reported on code.google.com by linasel
on 15 Mar 2010 at 2:02
When I run the monitor program, it is not showing no one sensor.
My board is G31M-ES2L (Gigabyte).
Regards,
Nikolay
Original issue reported on code.google.com by [email protected]
on 6 Apr 2010 at 5:23
No Information about sensors (fan and motherboard temp) of notebook
Compaq6910p. Only show icon named "30BE" without a tree.
Information about proc and HDD are showed.
PS
I attach first lines of the report file.
Original issue reported on code.google.com by [email protected]
on 6 Apr 2010 at 8:25
Attachments:
Using the navigator I found the reported fan speed is often a bit off and
erratical. Using the percentage seems better and more intuitive to me.
Original issue reported on code.google.com by [email protected]
on 19 Feb 2010 at 11:52
What is the expected output? What do you see instead?
Unable to build solution under Visual Studio 2008. Missing resource
reported.
What version of the product are you using? On what operating system?
Latest source code from Google SVN repository. Revision 104.
Please provide any additional information below.
Source code is missing file "mainboard.png" in Resources folder. Missing
file can be retrieved from compiled downloadable program, using Reflector.
Please attach an OpenHardwareMonitor.Report.txt, which can be created with
"File / Save Report" in the Open Hardware Monitor folder.
Original issue reported on code.google.com by [email protected]
on 22 Mar 2010 at 7:47
Attachments:
A useful option that would be welcome in OHM.
Original issue reported on code.google.com by [email protected]
on 24 Feb 2010 at 7:17
Right now only one CPU is supported. If a system has more than one CPU the
behaviour is undefined.
The mapping of operating system CPU affinity mask to hardware logical
processor id is assumed to be 1:1, which is wrong on certain (32-Bit
Windows) systems. This can lead to two core temperature sensors being read
twice, while two other are missing.
Implementing APIC based CPU topology enumeration should fix both issues.
Original issue reported on code.google.com by moel.mich
on 19 Apr 2010 at 7:53
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at OpenHardwareMonitor.Utilities.ReadOnlyArray`1.get_Item(Int32 index)
at OpenHardwareMonitor.Hardware.CPU.AMD0FCPU.Update()
at OpenHardwareMonitor.Hardware.CPU.AMD0FCPU..ctor(String name, UInt32
family, UInt32 model, UInt32 stepping, UInt32[,] cpuidData, UInt32[,]
cpuidExtData)
at OpenHardwareMonitor.Hardware.CPU.CPUGroup..ctor()
at OpenHardwareMonitor.Hardware.Computer.Open()
at OpenHardwareMonitor.GUI.MainForm..ctor()
at OpenHardwareMonitor.Program.Main()
Original issue reported on code.google.com by [email protected]
on 8 Mar 2010 at 7:48
Please add Power Profile change menu.
It will be useful for changing power consumption. I use profiles for limit
processor performance.
I suggest add this option with processor sensors.
Original issue reported on code.google.com by [email protected]
on 19 Mar 2010 at 7:03
What steps will reproduce the problem?
1. Downloaded
2. Started and checked all options available in View/Sensors menu
3. I can not see the fan speed and many others as presented on your web
site. Please see the attached file
What is the expected output? What do you see instead?
I would like to see the meters for all the hardware, as it is presented on
the website
What version of the product are you using? On what operating system?
I am using the latest version on a Windows 7 OS
Please provide any additional information below.
Original issue reported on code.google.com by linasel
on 23 Feb 2010 at 10:12
Attachments:
OHM would be even more useful if it could display on the Logitech G15
keyboard's LCD, similar to SpeedFan. Additionally, integration support
with LCDSirReal (http://www.linkdata.se/software/lcdsirreal) would be great
too.
Original issue reported on code.google.com by [email protected]
on 5 Apr 2010 at 5:06
Adding simple moving average to temperature readouts would increase
readability by smoothing out noise.
Original issue reported on code.google.com by [email protected]
on 12 Mar 2010 at 9:04
After testing with an older beta, today I installed the newest beta version
0.1.26.1 and am still experiencing the same incorrect spikes in either my
MB or CPU temperatures. Open Hardware Monitor reports spikes of 83 when
both Everest and CPUID Hardware Monitor both reported my temps never
exceeded 34. The image I sent you is from the older beta but the new one is
reporting the same thing. It has to be a bug because the spike is ALWAYS
83. Not once has it reported the spike as 81 or 82 or 84 or 85... but
ALWAYS 83 no matter if just surfing the Internet or maxing my system with
Orthos. The spike is always 83.
Original issue reported on code.google.com by [email protected]
on 9 Mar 2010 at 3:21
Attachments:
System.IndexOutOfRangeException: Der Index war außerhalb des Arraybereichs.
bei OpenHardwareMonitor.Hardware.Mainboard.SMBIOS..cto r()
bei OpenHardwareMonitor.Hardware.Mainboard.Mainboard.. ctor()
bei OpenHardwareMonitor.Hardware.Mainboard.MainboardGr oup..ctor()
bei OpenHardwareMonitor.Hardware.Computer.Open()
bei OpenHardwareMonitor.GUI.MainForm..ctor()
bei OpenHardwareMonitor.Program.Main()
Original issue reported on code.google.com by moel.mich
on 28 Mar 2010 at 5:52
Add the Intel CPU model 0x2C to get correct temperature TjMax and core
clock readings.
Original issue reported on code.google.com by moel.mich
on 12 Apr 2010 at 10:36
Attachments:
I'm sending report of open-hardware-monitor and screen-shot of gigabyte
Easy Tune6. Between programs are differences in temperature sensors.
And in your program is not has processor speed clock.
My system is windows7 home 64bit
Original issue reported on code.google.com by [email protected]
on 18 Mar 2010 at 3:47
Attachments:
I should be seeing the power voltages, and fan speed regulator output as
well as all temperature (ie CPUS both of them and N/S Bridges)..
All thermal and load data displayed is correct. Hard Disk detection is
correct as the associated thermal values.
Only much data is missing such as the following:
Missing all fan speeds, All Power voltage, and 1 of the 2 cpu is missing
not even showing as a second core. The single visible CPU Load displayed is
accurate.
Windows Vista Ultimate w/ SP2
The system is a dual Opteron 246 with 4 Gig Reg ECC DDRAM
Main-board is Tyan S2892 (Reference) Workstation/Server board
Chipset is Nforce 2000 Pro
GPU is Nvidia 7900 GTX
3 Hard disks (2 WD ) 1 Seagate 2 Internal SATA and 1 External IDE NAS
Please attach an OpenHardwareMonitor.Report.txt, which can be created with
"File / Save Report" in the Open Hardware Monitor folder.
Original issue reported on code.google.com by [email protected]
on 23 Apr 2010 at 12:13
Attachments:
Is there, or will be a way to translate open hardware monitor? I'd like to
contribute by translating it to portuguese and spanish.
Original issue reported on code.google.com by [email protected]
on 1 Apr 2010 at 9:25
For example on W83627EHF chips, some temperature sensors get added and
removed every other update of the display, which makes reading the display
difficult.
Original issue reported on code.google.com by moel.mich
on 20 Mar 2010 at 10:50
I see info on my processor, my video card and my hard drives, but no info
about fans or mobo sensors.
I am using Windows Vista Home Premium SP2
My mobo is an ASUS M4A785TD-V EVO
I can't set the program to run as administrator from the exe, since the
option appears greyed-out. I used the command "run as administrator", but
no changes.
Original issue reported on code.google.com by [email protected]
on 1 Apr 2010 at 7:33
Attachments:
The fan divisors have to be adjusted in realtime to avoid reading 0x00 or
0xff from the fan tacho register. The fan tacho should be kept at a high
value for better resolution, but with a margin to 0xff. Maybe a good window
is [96, 192].
Original issue reported on code.google.com by moel.mich
on 3 Mar 2010 at 10:24
What is the expected output? What do you see instead?
When laptop gos into hibernating, the monitoring software shuts down. Also
it shuts down (somethimes only) when it goes into sleep mode. The
monitoring software should stay open (in the tray bar) regardless the state
the laptop is in (except when it is completely turned off).
What version of the product are you using? On what operating system?
I am using the latest version of the software under Windows 7 OS
Please provide any additional information below.
This kind of behavior happens since the last upgrade (Beta0.1.28). I think
the "run in windows startup" feature is provoking it. I love the feature
but I think it needs a little tweak.
Please attach an OpenHardwareMonitor.Report.txt, which can be created with
"File / Save Report" in the Open Hardware Monitor folder.
Original issue reported on code.google.com by linasel
on 3 Apr 2010 at 11:21
Hello !
Have you noticed, that the WingRing0 lib is no longer present? I registered
this just yesterday, looking for help to compile the driver by myself [If I
use open source, I always try to being able, to manage the project by
myself, because ONE DAY, I'll possibly depend completely on it ;-) ].
Best regards!
++mabra
Original issue reported on code.google.com by [email protected]
on 26 Apr 2010 at 2:17
Most likely the problem is caused by moving the Update to a seperate timer
thread. All the GUI updates have to be done from the winform thread, or
strange things might happen.
http://stackoverflow.com/questions/661561/how-to-update-gui-from-another-thread-
in-c
Original issue reported on code.google.com by moel.mich
on 29 Mar 2010 at 5:56
Subject cpu shows 100% usage on cores 3 and 4; Task Manage shows these
cores idle.
Original issue reported on code.google.com by [email protected]
on 25 Feb 2010 at 5:40
Attachments:
In the manual and sensor labels, the T-Balancer uses a numbering which
starts at 0. This should be used as well for the default labels.
Original issue reported on code.google.com by moel.mich
on 28 Mar 2010 at 5:28
What is the expected output? What do you see instead?
I hope, that SMART and drives with their temperature are normally show!?
What version of the product are you using? On what operating system?
I am using 0.1.30.0 BETA on "Windows Server 2008 R2", en, x64
Please provide any additional information below.
Currently I am using Speedfan, having a similar problem. MAY be, the
problems appears, after I installed Intel Storage Manager and managing an
RAID5 array. The RAID5 contains three SATA drives, which are not shown by
Speedfan. My system drive is a Corsair SSD, which is displayed by Speedfan
including SMART data [but no temperature]. OpenHardwareMonitor does not
show any drives.
Please attach an OpenHardwareMonitor.Report.txt, which can be created with
"File / Save Report" in the Open Hardware Monitor folder.
My report was generated in a RDP session, running a local admin account.
Original issue reported on code.google.com by [email protected]
on 26 Apr 2010 at 2:30
Attachments:
It is good to have another option "Warning of high temperature or fan failure".
When the temperature rises above the threshold set by the user, a warning
is displayed on the screen / email / SMS / log
Original issue reported on code.google.com by [email protected]
on 6 Apr 2010 at 5:42
Add AMD CPU and bus clock readings.
Original issue reported on code.google.com by moel.mich
on 12 Apr 2010 at 10:44
It's working. Some of the voltage line are missing, and one of the temp
sensors (AUX) is disconnected but OHM shows it nonetheless.
I'm also attaching a screenshot of the voltage configuration screen from
SpeedFan, showing how the SuperIO is configured on the MSI K8 SLI Platinum.
Original issue reported on code.google.com by [email protected]
on 19 Feb 2010 at 11:31
Attachments:
i have a little bit changed.
And tested with P7P55, M3N78 and Everest 5.5.2100
You can use it in your code
Original issue reported on code.google.com by [email protected]
on 19 Apr 2010 at 6:15
Attachments:
What is the expected output? What do you see instead?
In OpenHandwareMonitor.Crash.TXT
System.IndexOutOfRangeException: Index outside the bounds of the array.
In OpenHardwareMonitor.Hardware.Mainboard.SMBIOS .. ctor ()
In OpenHardwareMonitor.Hardware.Mainboard.Mainboard .. ctor ()
In OpenHardwareMonitor.Hardware.Mainboard.MainboardGroup .. ctor ()
In OpenHardwareMonitor.Hardware.Computer.Open ()
In OpenHardwareMonitor.GUI.MainForm .. ctor ()
In OpenHardwareMonitor.Program.Main ()
What version of the product are you using? On what operating system?
v1.28bata
OS:
winxp sp3 home edition
Please provide any additional information below.
Clicked "OpenHardwareMonitor.exe",but it not run.
Please attach an OpenHardwareMonitor.Report.txt, which can be created with
"File / Save Report" in the Open Hardware Monitor folder.
No OpenHardwareMonitor.Report.txt File.
Original issue reported on code.google.com by sef96121
on 11 Apr 2010 at 5:05
Implementation is similar to Winbond chips, but creating a new class might
be a good idea.
Original issue reported on code.google.com by moel.mich
on 27 Apr 2010 at 6:33
The CPU VCore is wrong for this mainboard, it shows 0.86V when the correct
value is 1.26V. The EVGA X58 SLI Classified seems to use a voltage divider
with 4.7k and 10k resistors for the CPU VCore (and perhaps the DRAM as well).
http://hardforum.com/showpost.php?p=1035483713&postcount=58
Original issue reported on code.google.com by moel.mich
on 24 Mar 2010 at 8:36
Attachments:
What is the expected output? What do you see instead?
The CPU temperature is always 5 degree Celsius lower than other similar
software shows. I am not sure which software shows the real temp but I am
just making you aware of this fact so you may want to look into it.
What version of the product are you using? On what operating system?
Latest version on Windows 7
Please provide any additional information below.
Please attach an OpenHardwareMonitor.Report.txt, which can be created with
"File / Save Report" in the Open Hardware Monitor folder.
Original issue reported on code.google.com by linasel
on 24 Feb 2010 at 6:20
When OHM is left open for a long time, the graph becomes crowded. The only
way to fix this is to close OHM but that also mean losing the whole
backlog. What we need is a menu to select the amount of data to be plotted,
e.g. Show All/Show Last 30 min/Last 10 etc.
Original issue reported on code.google.com by [email protected]
on 13 Mar 2010 at 2:41
Add a global option to switch °C to °F (or to °C and °F) displays.
Original issue reported on code.google.com by moel.mich
on 3 Mar 2010 at 10:36
The information of voltage and of speed of the ventilator is not shown.
Is there any other way of showing them? (They are selected how visible in
the View Sensors)
Mobo DQ965GF Windows Vista Business 32bits.
(reposted from Issue 27)
Original issue reported on code.google.com by moel.mich
on 6 Apr 2010 at 2:40
Attachments:
What is the expected output? What do you see instead?
There are no fan speeds displayed.
What version of the product are you using? On what operating system?
V. 0.1.27 Beta on Windows 7
Please provide any additional information below.
In previous versions the fans were displayed, but all at 0 rpm.
Please attach an OpenHardwareMonitor.Report.txt, which can be created with
"File / Save Report" in the Open Hardware Monitor folder.
Original issue reported on code.google.com by [email protected]
on 22 Mar 2010 at 11:22
Attachments:
I have wrong defining CPU frequency and bus speed
OHM 0.1.28.0 Beta; Gygabite 8IPE1000-G; Intel Pentium 4 3.00Ghz (actualy
little bit more (3014.5Mhz shown by CPU-Z) Win XP SP3 32Bit
Screenshot:
[URL=http://img13.imageshack.us/i/bug1qy.jpg/][IMG=http://img13.imageshack.u
s/img13/5263/bug1qy.jpg][/IMG][/URL]
Original issue reported on code.google.com by [email protected]
on 22 Apr 2010 at 9:51
Attachments:
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.