Disclaimer: This project is experimental, still in development, and is recommended for experienced tinkerers and solderers. Don't let that disuade you, but know that documentation, methods, and peocedures are not production ready.

Frequently Asked Questions can be found here.

PVS-69 is a FOSSCAD Night Vision Device (NVD). It uses a fpv drone camera and a small screen, rather than a IIT tube, and is designed to be mounted to a combat helmet.

The current suggested components cost ~$500, about 10x less than the industry standard phosphor tube-based night vision.

The current version of the PVS-69 is the Gen3 FOXTROT. Housings for both V760 and V780 displays are available. The Gen3 FOXTROT also comes with a CS Mount Lens Adapter Assembly (see here for writeup on lenses), which is interchangable with the NE3 Stock Lens Cap.

PVS-69/Gen3 FOXTROT is the current version of the PVS-69 that is compatible with the V760A family of displays.

PVS-69/Wiring Diagrams contains the current wiring diagrams for the current version of the PVS-69.

PVS-69/_Older Versions/__Archive contains all the older versions of the PVS-69.

PVS-69/Gen4 ALPHA is an analog/'digital IIT' NVG housing, and is still in closed beta.

PVS-69/_Olders Versions/__Archive/VPNVG is the PVS-69 Gen1 pano version using the adafruit displays. The VBNVG was a binocular version which was made in tandem with the VPNVG.