Simulation vo_server fail about pmb2_simulation HOT 6 CLOSED

Hi @AufarZakiev, we've disabled that node.

We're in the process of reviewing all our public simulations, the most currently updated are TALOS, REEM-C and TIAGo (which uses the PMB2 for navigation), so you may want to try that as well. We have plans to migrate the PMB2 simulation to Kinetic during this year.

from pmb2_simulation.

OK, now it complains on pal_python and so on

I feel that PMB simulation is in process of migration and there is huge pain to resolve all these dependencies, isn't it?
We can move to Kinetic and TIAGo simulations, however, we have real PMB2 robot. Is the software developed and tested in Kinetic TIAGo simulation suitable for real PMB2 robot (by its kinematics, interfaces, etc)? It seems like not suitable, because as far as I know PMB2 itself has Indigo installed.
Therefore, what should we do to synchronize our real and simulated robots software?

from pmb2_simulation.

Hi, if you already have the real PMB2 robot, we have provided you with an ISO image in order to install a development computer with all the simulation and software required to use the PMB2.

You should be using that, since you will have access to all the features that we haven't published and that are guaranteed to work.

from pmb2_simulation.

OK, we will try it ASAP.
We used it in the very beginning of the development, however, it has problems with USB, Wi-fi and video drivers and so on, so we tried to move to common Ubuntu to avoid them.
I had to mention about real robot in initial issue post, yeah? :)
Sorry for this, we will use Developer OS further.
Thank you very much for response and patience!

from pmb2_simulation.

@AufarZakiev

Dear Aufar, could you contact us by sending an email to [email protected] in order to have your official support account created?

Thanks in advance

from pmb2_simulation.

@jordi-pages
Sorry for long response, I will do it in seconds.

from pmb2_simulation.