Generic bootloader to be used in conjunction with Pelion Device Management Client.
- Install
mbed-clihttps://github.com/ARMmbed/mbed-cli - Run
mbed deployto pull in dependencies - Compile by running
mbed compile -t GCC_ARM -m [target] --profile release --app-config=configs/.json
An image that contains the bootloader and your application can then be flashed on your device.
If you use Mbed CLI 1.8.x then two images are created when you compile Pelion Device Management Client example application.
- A full image
mbed-cloud-client-example-internal.binwhich combines the application with the bootloader and is used for the initial programming of the device - An update image
mbed-cloud-client-example-internal_update.binwhich contains only the application and is used for updating the device over the air
In order for Mbed CLI to pick up the bootloader binary you built, set "target.bootloader_img": <path to bootloader binary> in your application's mbed_app.json For more details, see Arm Mbed OS managed bootloader.
Flash mbed-cloud-client-example-internal.bin to your device by drag and drop.
The metadata header is the bootloader update interface. Each stage of the boot sequence leading up to and including the application (except the root bootloader) is paired with a metadata header (containing version, size, hash etc.). Information contained in the metadata header allows validation and ordering of available firmwares.
The firmware metadata header structure can be found here. There are two header formats, internal and external. The external header format is used for storing firmware on external storage which is assumed to be insecure. Hence the external header format contains extra security information to prevent external tampering of the header data.
NOTE: All these configurations must be set the same in the Pelion Device Management Client when compiling the corresponding application for successful update operation.
update-client.application-details, Address at which the metadata header of the active firmware is written. Must align to flash erase boundarymbed-bootloader.application-start-address, Address at which the application starts Must align to vector table size boundary and flash write page boundary.mbed-bootloader.application-jump-address, Optional address for the application's entry point (vector table) if this is different frommbed-bootloader.application-start-address.
If the application-start-address is set less than one erase sector after the update-client.application-details, the two regions will be erased together. Otherwise the two regions will be erased separately in which case application-start-address must also align to flash erase boundary.
If application-jump-address is not set, the application-start-address will be used as the application's entry point. The entry point MUST be the same as "target.mbed_app_start" in the application.
MBED_CLOUD_CLIENT_UPDATE_STORAGE, This need to be set in the "macros" section ofmbed_app.json. Choices are ARM_UCP_FLASHIAP_BLOCKDEVICE and ARM_UCP_FLASHIAP. This determines whether the firmware is stored on a blockdevice or internal flash. If blockdevice is usedARM_UC_USE_PAL_BLOCKDEVICE=1must also be set.update-client.storage-address, The address in sd block device or internal flash where the firmware candidates are stored. Must align to flash erase boundaryupdate-client.storage-size, total size on the block device or internal flash reserved for firmware storage. It will be rounded up to align with flash erase sector size automatically.update-client.storage-locations, The number of slots in the firmware storage.
NOTE: See the Pelion Device Management Client documentation for more information about storage options available and porting to new platforms.
The bootloader uses device secret key to authenticate anything that is stored on external storage. The update client must be able to obtain the same key as the bootloader. The key is derived from a device root of trust using the algorithm here. If the firmware candidate is stored on internal storage, i.e. MBED_CLOUD_CLIENT_UPDATE_STORAGE=ARM_UCP_FLASHIAP then the device secret key is not needed by the bootloader hence any configuration will be ignored.
You may choose to use Mbed OS' KVSTORE feature to store and read the device RoT. During first boot Pelion Device Management Client will generate a random number from an available entropy source and storage it in KVSTORE on internal flash. On subsequent boots, the RoT will be read from KVSTORE. To enable KVSTORE RoT, you must set the following:
- Set
"mbed-bootloader.use-kvstore-rot": 1inmbed_app.jsonto enable the KVStore RoT implementation here. - Set
"storage.storage_type": "FILESYSTEM", this configurations will have RoT stored on internal flash. - Set
"storage_filesystem.internal_base_address". The addresses Must align to flash erase boundary. - Set
"storage_filesystem.rbp_internal_size". It must contain even number of sectors.
Alternatively you can choose to use a custom device specific RoT by implementing the function mbed_cloud_client_get_rot_128bit. An example can be found here.
Pelion Cloud Client reports some information about the bootloader to the cloud. The bootloader provides this information in the form of a arm_uc_installer_details_t struct:
const arm_uc_installer_details_t bootloader = {
.arm_hash = BOOTLOADER_ARM_SOURCE_HASH,
.oem_hash = BOOTLOADER_OEM_SOURCE_HASH,
.layout = BOOTLOADER_STORAGE_LAYOUT
};
For this information to propagate to the cloud, the 3 macros (BOOTLOADER_ARM_SOURCE_HASH, BOOTLOADER_OEM_SOURCE_HASH and BOOTLOADER_STORAGE_LAYOUT) in mbed_bootloader_info.h need to be populated manually before the bootloader binary is built.
BOOTLOADER_ARM_SOURCE_HASHshould be the SHA-1 git commit hash of the published mbed-bootloader source code.BOOTLOADER_OEM_SOURCE_HASHis used to indicate any modification that OEMs have made on top of the vanilla mbed-bootloader. Hence it should be populated with the OEM modified bootloader SHA-1 git commit hash.BOOTLOADER_STORAGE_LAYOUTis a proprietary enum to indicate the storage layout supported by this bootloader. The OEM is free to define the meaning of this number.
In order for the cloud client to recognise this struct and obtain the information. The offset of the symbol in the bootloader binary needs to be populated in the cloud client's configuration file. This information can be obtained from the map file of the compiled bootloader.
-
Example python code for obtaining the location:
with open("BUILD/K64F/GCC_ARM/mbed-bootloader.map", 'r') as fd: s = fd.read() regex = r"\.rodata\..*{}\s+(0x[0-9a-fA-F]+)".format("bootloader") match = re.search(regex, s, re.MULTILINE) offset = int(match.groups()[0], 16) print hex(offset)
-
In the
mbed_app.jsonof the Pelion Cloud Client Application, change the following:"update-client.bootloader-details" : "<boot_loader_info_address>"
User may set in mbed_app.json:
mbed-bootloader.max-copy-retries, The number of retries after a failed copy attempt.mbed-bootloader.max-boot-retries, The number of retries after a failed forward to application.mbed-bootloader.show-serial-output, Set to 0 to disable all serial output. Useful for reducing size on headless devices.mbed-bootloader.show-progress-bar, Set to 1 to print a progress bar for various processes.mbed-bootloader.max-application-size, Maximum size of the active application. The default value isFLASH_START_ADDRESS + FLASH_SIZE - APPLICATION_START_ADDRESS. Bootloader uses this value to reject candidate image that are too large.
+--------------------------+
| |
| |
| |
|Firmware Candidate Storage|
| |
| |
| |
+--------------------------+ <-+ update-client.storage-address
| |
| Active App |
+--------------------------+ <-+ mbed-bootloader.application-start-address
|Active App Metadata Header|
+--------------------------+ <-+ update-client.application-details
| |
| Bootloader |
| |
+--------------------------+ <-+ 0
- This is the default implementation at the default mbed_app.json
- The default flash layout is tested with GCC_ARM compiler with newlib-nano and release profile only. If a different compiler is used, the bootloader binary size will be larger and the offsets needs to be adjusted.
+--------------------------+
| |
| |
| |
|Firmware Candidate Storage|
| |
| |
| |
+--------------------------+ <-+ update-client.storage-address
| |
| KVSTORE |
| |
+--------------------------+ <-+ storage_tdb_internal.internal_base_address
| |
| |
| |
| Active App |
| |
| |
| |
+--------------------------+ <-+ mbed-bootloader.application-start-address
|Active App Metadata Header|
+--------------------------+ <-+ update-client.application-details
| |
| Bootloader |
| |
+--------------------------+ <-+ 0
- Internal Flash Only layout can be enabled by compiling the bootloader with the configuration file
--app-config configs/internal_flash_no_rot.json. By default the firmware storage region and filesystem is on external sd card. - The default flash layout is tested with GCC_ARM compiler with newlib-nano and release profile only. If a different compiler is used, the bootloader binary size will be larger and the offsets needs to be adjusted.
- The KVSTORE regions require even number of flash erase sectors. If the firmware candidate is stored on internal flash, the bootloader does not access the KVStore. But it still needs to be there for the benefit of the Pelion Device Management Client.
- Some micro-controller chips are designed with 2 banks of flash that can be read from and written to independently from each other. Hence it is a good idea to put your bootloader and active application on bank 1, your kvstore and firmware candidate storage on bank 2. This way when the application writes data to flash, it doesn't need to halt the processor execution to do it.
+--------------------------+
| |
| KVSTORE |
| |
+--------------------------+ <-+ storage_tdb_internal.internal_base_address
| |
| Free space |
| |
+--------------------------+
| |
| |
| |
| Active App |
| |
| |
| |
+--------------------------+ <-+ mbed-bootloader.application-start-address
|Active App Metadata Header|
+--------------------------+ <-+ update-client.application-details
| |
| Bootloader |
| |
+--------------------------+ <-+ 0
- This is the PSA default implementation using the default mbed_app.json
- The default flash layout is tested with GCC_ARM compiler with newlib-nano and release profile only. If a different compiler is used, the bootloader binary size will be larger and the offsets needs to be adjusted.
- The KVSTORE regions require even number of flash erase sectors. For PSA targets the KVStore is located at the ends of the flash.
Flash Erase Boundary: Flash can usually only be erased in blocks of specific sizes, this is platform specific and hence many regions need to align to this boundary.
Flash Page Boundary: Flash can usually only be written in blocks of specific sizes, this is platform specific and hence many regions need to align to this boundary.
Vector Table Size Boundary: The ARM architecture dictates that the Vector table of the application must be placed at an address that aligns to the next power of 2 of the size of the vector table.
The firmware update candidates is stored on an external sd card if the default configuration is used. The firmware is stored sequentially on the block device. The expected layout is as follows:
+--------------------------+<-+ End of SD card block device
| |
+--------------------------+<-+ update-client.storage-size + update-client.storage-address
| |
+--------------------------+
| |
| Firmware Candidate 1 |
| |
+--------------------------+
| Firmware Candidate 1 |
| Metadata Header |
+--------------------------+
| |
+--------------------------+
| |
| Firmware Candidate 0 |
| |
+--------------------------+
| Firmware Candidate 0 |
| Metadata Header |
+--------------------------+ <-+ update-client.storage-address
| |
+--------------------------+ <-+ Start of SD card block device (i.e. 0x0)
Debug prints can be turned on by enabling the define #define tr_debug(fmt, ...) printf("[DBG ] " fmt "\r\n", ##__VA_ARGS__) in source/bootloader_common.h and setting the ARM_UC_ALL_TRACE_ENABLE=1 macro on command line mbed compile -DARM_UC_ALL_TRACE_ENABLE=1.
Scenario: Your target is NUCLEO_F429ZI. You have added extra functionality to the bootloader such that the size of the bootloader exceeded the default 32KiB. How to configure your bootloader and application so that everything still work together.
NUCLEO_F429ZI has 2MiB of flash, and its sector sizes are as follows: 4x16KiB, 1x64KiB, 7x128KiB, 4x16KiB, 1x64KiB, 7x128KiB. Because the bootloader is larger than 32KiB, it will take the first 3 sectors. The KVStore area can no longer take 2x16KiB sectors. KVStore require even number of sectors. Hence we will move KVSTORE to the last 2x128KiB sectors in the flash region. So we will end up with the following layout:
0x08000000 - 0x0800C000 Bootloader
0x0800C000 - 0x0800C400 Application Header
0x0800C400 - 0x081C0000 Application
0x081C0000 - 0x08200000 KVSTORE
The update firmware candidate is still stored on sd-card.
Given the above flash layout the following configuration need to change in the mbed_app.json:
"storage_filesystem.internal_base_address": "(0x08000000+(2*1024-2*128)*1024)""storage_filesystem.rbp_internal_size": "(2*128*1024)""update-client.application-details": "(0x08000000+3*16*1024)""mbed-bootloader.application-start-address": "(0x08000000+(3*16+1)*1024)""mbed-bootloader.max-application-size" : "((1024*2-128*2-3*16-1)*1024)"
Now compile your bootloader. Flash and run the bootloader, on the serial UART you will see the following printout:
Layout: <layout_no> <boot_loader_info_address>
Keep a note of the boot_loader_info_address which we will use in the next step.
In mbed_app.json, change the following:
"update-client.application-details" : "(0x08000000+3*16*1024)""update-client.bootloader-details" : "<boot_loader_info_address>"
Change the following in mbed_app.json:
"storage_filesystem.internal_base_address": "(0x08000000+(2*1024-2*128)*1024)""storage_filesystem.rbp_internal_size": "(2*128*1024)""target.app_offset": "0x800c400","target.header_offset": "0x800c000","target.bootloader_img": "<path_to_your_newly_built_image>"
Now you can build the application following the Pelion Device Management Platform Documentation.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent