philbishop / virtual-nvr Goto Github PK

Turn your Raspberry PI or spare Linux box into a 4 channel IP Camera Network Video Recorder.

• 1 to 4 IP camera channels
• Disoverable by 3rd party client software
• Continuous recording
• Motion detection
• Video playback with motion events

This software is free to use for home enthusiasts or for evalution by developers and system integrators looking to build their own products on the core funrtionality.

The software requires a 64bit version of bullseye, preferably running on a Pi 4 but also works on the Raspberry Pi 3B+

This software requires an Intel/AMD 64bit processor to run.

NOTE: The software has only been tested on Ubuntu 22.04

Make sure the device this software is installed on is connected to the same network as your IP cameras.

wget -c https://incax.com/vnvr/vnvr-linux-arm64.tar.gz -O - | tar -xz  && cd vnvr-linux-arm64 && sudo chmod +x configure && sudo ./configure && sudo ./nx-vnvr

wget -c https://incax.com/vnvr/vnvr-linux-ubuntu64.tar.gz -O - | tar -xz && cd vnvr-linux-ubuntu64 && sudo chmod +x configure && sudo ./configure && sudo ./nx-vnvr

If the software prompts you, please install the missing dependences

You may be prompted to install one or both of the following

sudo apt install -y ffmpeg
sudo apt install -y gpac

Then run the software

From the install directory

sudo ./nx-vnvr

On startup the software wil do a quick multicast discovery check and output information to the console.

For example:

TESTING MULTICAST DISCOVERY...
MULTICAST DISCOVERY found 192.168.1.105
MULTICAST DISCOVERY found 192.168.1.100
MULTICAST DISCOVERY found 192.168.1.107
MULTICAST DISCOVERY found 192.168.1.108
MULTICAST DISCOVERY found 192.168.1.109
MULTICAST DISCOVERY 5 cameras found

If no cameras are discovered, please check that the device running this software is connected to the same network as your cameras.

When you run the software it will output a web browser URL.

For example: where 192.168.1.105 is the Raspberry Pi's IP address

-------------------
WEB BROWSER URL
http://192.168.1.102:8127/web
-------------------

Note: If the IP address displayed is 127.0.0.1 then check your network connection for the LAN IP address. Theh pass that IP address as a parameter.

For example:

sudo ./nx-vnvr 192.168.1.105

Best to use a different computer to access the web page.

When you first connect to the web page the software will search for IP cameras on your network.

If successful you will see the CAMERA CHANNELS window.

Start with Channel #1 and click "Select camera"

Next select a camera from the dropdown list then enter the cameras' login details.

Click "Connect" and if authenticated OK, then click "Save"

The camera will now appear in the web page.

Repeat for your remaining three cameras.

There is some latency when viewing the live camera streams via the web browser user interface due to conversion to HLS.

Use one the client apps below to view the streams more effeciently.

You can access the NVR via your iPhone, Mac or Windows PC using the free NX-V IP Camera viewer app available in the respective app store, links below.

NX-V apps page