philipellisis / arduino-virtual-pinball-board Goto Github PK

Is it possible to choose which outputs and activated or not initially. from 16 to 32 they are active in can we choose the configuration software?

Good morning

congratulations for your work. I'm looking to make a PCB with your system. I'm not sure I understand where everything connects

for the output and accelerometer extension I put them on SDA and SCL in series as in the first diagram.
for the three 74HC165 I'm not sure where or for the plunger can you let me know

can you tell me where I plug my hard input into the arduino

Best regards

PC immediately wakes up until I disconnect the USB. This happens with Virtual Pinball PinOne Mini Machine.

The firmware needs to handle suspend mode.

Related:

• https://forum.arduino.cc/t/joystick-and-windows-sleep/692663
• https://forum.arduino.cc/t/patch-detecting-computer-sleep-wake-through-usb/350185/4
• arduino/Arduino#4241

Can the code be updated to v1.13 to match the configurator?

Hi!
So I have my own pinone board build on the schematic and the readme file of this project. I'm using the feature/new-game-controller branch. I loaded the CSD Config tool and enabled the accelerometer and calibrated it. It works fine. However, the nudge won't work in VPX. I have configured VPX to use the buttons (no keyboard mapping) and this work.
I had this issue where Windows see 3 Arduino micro connected to it and I had to select the good one (randomly) in the advanced pane :

I looked at the documentation on your website on how to config VPX for the nudge and did the same.
What i'm missing?
Is there a way to have only one controller in Windows? I'm guessing it may be related.

Thank you.

Hi there.

i like to build this. is there any schematic on how to connect the MPU-6050, PCA9685 & 74HC165?

Thanks!
Joey