Micro Parser Combinators
mpc is a lightweight and powerful Parser Combinator library for C.
Using mpc might be of interest to you if you are...
- Building a new programming language
- Building a new data format
- Parsing an existing programming language
- Parsing an existing data format
- Embedding a Domain Specific Language
- Implementing Greenspun's Tenth Rule
Features
- Type-Generic
- Predictive, Recursive Descent
- Easy to Integrate (One Source File in ANSI C)
- Automatic Error Message Generation
- Regular Expression Parser Generator
- Language/Grammar Parser Generator
Alternatives
The current main alternative for a C based parser combinator library is a branch of Cesium3.
mpc provides a number of features that this project does not offer, and also overcomes a number of potential downsides:
- mpc Works for Generic Types
- mpc Doesn't rely on Boehm-Demers-Weiser Garbage Collection
- mpc Doesn't use
setjmp
andlongjmp
for errors - mpc Doesn't pollute the namespace
Quickstart
Here is how one would use mpc to create a parser for a basic mathematical expression language.
mpc_parser_t *Expr = mpc_new("expression");
mpc_parser_t *Prod = mpc_new("product");
mpc_parser_t *Value = mpc_new("value");
mpc_parser_t *Maths = mpc_new("maths");
mpca_lang(
" \
expression : <product> (('+' | '-') <product>)*; \
product : <value> (('*' | '/') <value> )*; \
value : /[0-9]+/ | '(' <expression> ')'; \
maths : /^/ <expression> /$/; \
",
Expr, Prod, Value, Maths);
mpc_result_t r;
if (mpc_parse("input", input, Maths, &r)) {
mpc_ast_print(r.output);
mpc_ast_delete(r.output);
} else {
mpc_err_print(r.error);
mpc_err_delete(r.error);
}
mpc_cleanup(4, Expr, Prod, Value, Maths);
If you were to set input
to the string (4 * 2 * 11 + 2) - 5
, the printed output would look like this.
>:
regex:
expression|>:
value|>:
char: '('
expression|>:
product|>:
value|regex: '4'
char: '*'
value|regex: '2'
char: '*'
value|regex: '11'
char: '+'
product|value|regex: '2'
char: ')'
char: '-'
product|value|regex: '5'
regex:
Getting Started
Introduction
Parser Combinators are structures that encode how to parse a particular language. They can be combined using intuitive operators to create new parsers of increasing complexity. Using these operators detailed grammars and languages can be parsed and processed in a quick, efficient, and easy way.
The trick behind Parser Combinators is the observation that by structuring the library in a particular way, one can make building parser combinators look like writing a grammar itself. Therefore instead of describing how to parse a language, a user must only specify the language itself, and the computer will work out how to parse it ... as if by magic!
mpc can be used in this mode, or, as shown in the above example, it can allow you to specify the grammar directly as a string or in a file.
Basic Parsers
String Parsers
All the following functions construct new basic parsers of the type mpc_parser_t *
. All of those parsers return a newly allocated char *
with the character(s) they manage to match. If unsuccessful they will return an error. They have the following functionality.
mpc_parser_t *mpc_any(void);
Matches any individual character
mpc_parser_t *mpc_char(char c);
Matches a single given character c
mpc_parser_t *mpc_range(char s, char e);
Matches any single given character in the range s
to e
(inclusive)
mpc_parser_t *mpc_oneof(const char *s);
Matches any single given character in the string s
mpc_parser_t *mpc_noneof(const char *s);
Matches any single given character not in the string s
mpc_parser_t *mpc_satisfy(int(*f)(char));
Matches any single given character satisfying function f
mpc_parser_t *mpc_string(const char *s);
Matches exactly the string s
Trivial Parsers
Several other functions exist that construct parsers with some other special functionality.
mpc_parser_t *mpc_pass(void);
Consumes no input, always successful, returns NULL
mpc_parser_t *mpc_fail(const char *m);
mpc_parser_t *mpc_failf(const char *fmt, ...);
Consumes no input, always fails with message m
.
mpc_parser_t *mpc_failf(const char *fmt, ...);
Consumes no input, always fails with formatted message given by fmt
and following parameters.
mpc_parser_t *mpc_lift(mpc_ctor_t f);
Consumes no input, always successful, returns the result of function f
mpc_parser_t *mpc_lift_val(mpc_val_t *x);
Consumes no input, always successful, returns x
Parsing
Once you've build a parser, you can run it on some input using one of the following functions. These functions return 1
on success and 0
on failure. They output either the result, or an error to a mpc_result_t
variable. This type is defined as follows.
typedef union {
mpc_err_t *error;
mpc_val_t *output;
} mpc_result_t;
where mpc_val_t *
is synonymous with void *
and simply represents some pointer to data - the exact type of which is dependant on the parser. For almost all of the basic parsers the return type for a successful parser will be char *
.
int mpc_parse(const char *filename, const char *string, mpc_parser_t *p, mpc_result_t *r);
Run a parser on some string.
int mpc_parse_file(const char *filename, FILE *file, mpc_parser_t *p, mpc_result_t *r);
Run a parser on some file.
int mpc_parse_pipe(const char *filename, FILE *pipe, mpc_parser_t *p, mpc_result_t *r);
Run a parser on some pipe (such as stdin
).
int mpc_parse_contents(const char *filename, mpc_parser_t *p, mpc_result_t *r);
Run a parser on the contents of some file.
Combinators
Combinators are functions that take one or more parsers and return a new parser of some given functionality.
These combinators work independently of exactly what data type the parsers given as input return on success. In languages such as Haskell ensuring you don't input one type of data into a parser requiring a different type of data is done by the compiler. But in C we don't have that luxury. So it is at the discretion of the programmer to ensure that he or she deals correctly with the outputs of different parser types.
A second annoyance in C is that of manual memory management. Some parsers might get half-way and then fail. This means they need to clean up any partial data that has been collected in the parse. In Haskell this is handled by the Garbage Collector, but in C these combinators will need to take destructor functions as input, which say how clean up any partial data that has been collected.
Here are the main combinators and how to use then.
mpc_parser_t *mpc_expect(mpc_parser_t *a, const char *e);
mpc_parser_t *mpc_expectf(mpc_parser_t *a, const char *fmt, ...);
Returns a parser that runs a
, and on success returns the result of a
, while on failure reports that e
was expected.
mpc_parser_t *mpc_apply(mpc_parser_t *a, mpc_apply_t f);
mpc_parser_t *mpc_apply_to(mpc_parser_t *a, mpc_apply_to_t f, void *x);
Returns a parser that applies function f
(optionality taking extra input x
) to the result of parser a
.
mpc_parser_t *mpc_not(mpc_parser_t *a, mpc_dtor_t da);
mpc_parser_t *mpc_not_lift(mpc_parser_t *a, mpc_dtor_t da, mpc_ctor_t lf);
Returns a parser with the following behaviour. If parser a
succeeds, then it fails and consumes no input. If parser a
fails, then it succeeds, consumes no input and returns NULL
(or the result of lift function lf
). Destructor da
is used to destroy the result of a
on success.
mpc_parser_t *mpc_maybe(mpc_parser_t *a);
mpc_parser_t *mpc_maybe_lift(mpc_parser_t *a, mpc_ctor_t lf);
Returns a parser that runs a
. If a
is successful then it returns the result of a
. If a
is unsuccessful then it succeeds, but returns NULL
(or the result of lf
).
mpc_parser_t *mpc_many(mpc_fold_t f, mpc_parser_t *a);
Keeps running a
until it fails. Results are combined using fold function f
. See the Function Types section for more details.
mpc_parser_t *mpc_many1(mpc_fold_t f, mpc_parser_t *a);
Attempts to run a
one or more times. Results are combined with fold function f
.
mpc_parser_t *mpc_count(int n, mpc_fold_t f, mpc_parser_t *a, mpc_dtor_t da);
Attempts to run a
exactly n
times. If this fails, any partial results are destructed with da
. If successful results of a
are combined using fold function f
.
mpc_parser_t *mpc_or(int n, ...);
Attempts to run n
parsers in sequence, returning the first one that succeeds. If all fail, returns an error.
mpc_parser_t *mpc_and(int n, mpc_fold_t f, ...);
Attempts to run n
parsers in sequence, returning the fold of the results using fold function f
. First parsers must be specified, followed by destructors for each parser, excluding the final parser. These are used in case of partial success. For example: mpc_and(3, mpcf_strfold, mpc_char('a'), mpc_char('b'), mpc_char('c'), free, free);
would attempt to match 'a'
followed by 'b'
followed by 'c'
, and if successful would concatenate them using mpcf_strfold
. Otherwise would use free
on the partial results.
mpc_parser_t *mpc_predictive(mpc_parser_t *a);
Returns a parser that runs a
with backtracking disabled. This means if a
consumes any input, it will not be reverted, even on failure. Turning backtracking off has good performance benefits for grammars which are LL(1)
. These are grammars where the first character completely determines the parse result - such as the decision of parsing either a C identifier, number, or string literal. This option should not be used for non LL(1)
grammars or it will produce incorrect results or crash the parser.
Another way to think of mpc_predictive
is that it can be applied to a parser (for a performance improvement) if either successfully parsing the first character will result in a completely successful parse, or all of the referenced sub-parsers are also LL(1)
.
Function Types
The combinator functions take a number of special function types as function pointers. Here is a short explanation of those types are how they are expected to behave. It is important that these behave correctly otherwise it is easy to introduce memory leaks or crashes into the system.
typedef void(*mpc_dtor_t)(mpc_val_t*);
Given some pointer to a data value it will ensure the memory it points to is freed correctly.
typedef mpc_val_t*(*mpc_ctor_t)(void);
Returns some data value when called. It can be used to create empty versions of data types when certain combinators have no known default value to return. For example it may be used to return a newly allocated empty string.
typedef mpc_val_t*(*mpc_apply_t)(mpc_val_t*);
typedef mpc_val_t*(*mpc_apply_to_t)(mpc_val_t*,void*);
This takes in some pointer to data and outputs some new or modified pointer to data, ensuring to free the input data if it is no longer used. The apply_to
variation takes in an extra pointer to some data such as state of the system.
typedef mpc_val_t*(*mpc_fold_t)(int,mpc_val_t**);
This takes a list of pointers to data values and must return some combined or folded version of these data values. It must ensure to free and input data that is no longer used once after combination has taken place.
Case Study - Identifier
Combinator Method
Using the above combinators we can create a parser that matches a C identifier.
When using the combinators we need to supply a function that says how to combine two char *
.
For this we build a fold function that will concatenate zero or more strings together. For this sake of this tutorial we will write it by hand, but this (as well as many other useful fold functions), are actually included in mpc under the mpcf_*
namespace, such as mpcf_strfold
.
mpc_val_t *strfold(int n, mpc_val_t **xs) {
char *x = calloc(1, 1);
int i;
for (i = 0; i < n; i++) {
x = realloc(x, strlen(x) + strlen(xs[i]) + 1);
strcat(x, xs[i]);
free(xs[i]);
}
return x;
}
We can use this to specify a C identifier, making use of some combinators to say how the basic parsers are combined.
mpc_parser_t *alpha = mpc_or(2, mpc_range('a', 'z'), mpc_range('A', 'Z'));
mpc_parser_t *digit = mpc_range('0', '9');
mpc_parser_t *underscore = mpc_char('_');
mpc_parser_t *ident = mpc_and(2, strfold,
mpc_or(2, alpha, underscore),
mpc_many(strfold, mpc_or(3, alpha, digit, underscore)),
free);
/* Do Some Parsing... */
mpc_delete(ident);
Notice that previous parsers are used as input to new parsers we construct from the combinators. Note that only the final parser ident
must be deleted. When we input a parser into a combinator we should consider it to be part of the output of that combinator.
Because of this we shouldn't create a parser and input it into multiple places, or it will be doubly feed.
Regex Method
There is an easier way to do this than the above method. mpc comes with a handy regex function for constructing parsers using regex syntax. We can specify an identifier using a regex pattern as shown below.
mpc_parser_t *ident = mpc_re("[a-zA-Z_][a-zA-Z_0-9]*");
/* Do Some Parsing... */
mpc_delete(ident);
Library Method
Although if we really wanted to create a parser for C identifiers, a function for creating this parser comes included in mpc along with many other common parsers.
mpc_parser_t *ident = mpc_ident();
/* Do Some Parsing... */
mpc_delete(ident);
Parser References
Building parsers in the above way can have issues with self-reference or cyclic-reference. To overcome this we can separate the construction of parsers into two different steps. Construction and Definition.
mpc_parser_t *mpc_new(const char *name);
This will construct a parser called name
which can then be used as input to others, including itself, without fear of being deleted. Any parser created using mpc_new
is said to be retained. This means it will behave differently to a normal parser when referenced. When deleting a parser that includes a retained parser, the retained parser will not be deleted along with it. To delete a retained parser mpc_delete
must be used on it directly.
A retained parser can then be defined using...
mpc_parser_t *mpc_define(mpc_parser_t *p, mpc_parser_t *a);
This assigns the contents of parser a
to p
, and deletes a
. With this technique parsers can now reference each other, as well as themselves, without trouble.
mpc_parser_t *mpc_undefine(mpc_parser_t *p);
A final step is required. Parsers that reference each other must all be undefined before they are deleted. It is important to do any undefining before deletion. The reason for this is that to delete a parser it must look at each sub-parser that is used by it. If any of these have already been deleted a segfault is unavoidable - even if they were retained beforehand.
void mpc_cleanup(int n, ...);
To ease the task of undefining and then deleting parsers mpc_cleanup
can be used. It takes n
parsers as input, and undefines them all, before deleting them all.
Note: mpc may have separate stages for construction and definition, but it still does not detect left-recursive grammars. These will go into an infinite loop when they attempt to parse input, and so should specified instead in right-recursive form instead.
Library Reference
Common Parsers
mpc_soi;
Matches only the start of input, returnsNULL
mpc_eoi;
Matches only the end of input, returnsNULL
mpc_whitespace
Matches any whitespace character" \f\n\r\t\v"
mpc_whitespaces
Matches zero or more whitespace charactersmpc_blank
Matches whitespaces and frees the result, returnsNULL
mpc_newline
Matches'\n'
mpc_tab
Matches'\t'
mpc_escape
Matches a backslash followed by any charactermpc_digit
Matches any character in the range'0'
-'9'
mpc_hexdigit
Matches any character in the range'0'
-'9'
as well as'A'
-'F'
and'a'
-'f'
mpc_octdigit
Matches any character in the range'0'
-'7'
mpc_digits
Matches one or more digitmpc_hexdigits
Matches one or more hexdigitmpc_octdigits
Matches one or more octdigitmpc_lower
Matches and lower case charactermpc_upper
Matches any upper case charactermpc_alpha
Matches and alphabet charactermpc_underscore
Matches'_'
mpc_alphanum
Matches any alphabet character, underscore or digitmpc_int
Matches digits and returns anint*
mpc_hex
Matches hexdigits and returns anint*
mpc_oct
Matches octdigits and returns anint*
mpc_number
Matchesmpc_int
,mpc_hex
ormpc_oct
mpc_real
Matches some floating point number as a stringmpc_float
Matches some floating point number and returns afloat*
mpc_char_lit
Matches some character literal surrounded by'
mpc_string_lit
Matches some string literal surrounded by"
mpc_regex_lit
Matches some regex literal surrounded by/
mpc_ident
Matches a C style identifier
Useful Parsers
mpc_startswith(mpc_parser_t *a);
Matches the start of input followed bya
mpc_endswith(mpc_parser_t *a, mpc_dtor_t da);
Matchesa
followed by the end of inputmpc_whole(mpc_parser_t *a, mpc_dtor_t da);
Matches the start of input,a
, and the end of inputmpc_stripl(mpc_parser_t *a);
Matchesa
striping any whitespace to the leftmpc_stripr(mpc_parser_t *a);
Matchesa
striping any whitespace to the rightmpc_strip(mpc_parser_t *a);
Matchesa
striping any surrounding whitespacempc_tok(mpc_parser_t *a);
Matchesa
and strips any trailing whitespacempc_sym(const char *s);
Matches strings
and strips any trailing whitespacempc_total(mpc_parser_t *a, mpc_dtor_t da);
Matches the whitespace strippeda
, enclosed in the start and end of inputmpc_between(mpc_parser_t *a, mpc_dtor_t ad, const char *o, const char *c);
Matchesa
between stringso
andc
mpc_parens(mpc_parser_t *a, mpc_dtor_t ad);
Matchesa
between"("
and")"
mpc_braces(mpc_parser_t *a, mpc_dtor_t ad);
Matchesa
between"<"
and">"
mpc_brackets(mpc_parser_t *a, mpc_dtor_t ad);
Matchesa
between"{"
and"}"
mpc_squares(mpc_parser_t *a, mpc_dtor_t ad);
Matchesa
between"["
and"]"
mpc_tok_between(mpc_parser_t *a, mpc_dtor_t ad, const char *o, const char *c);
Matchesa
betweeno
andc
, whereo
andc
have their trailing whitespace striped.mpc_tok_parens(mpc_parser_t *a, mpc_dtor_t ad);
Matchesa
between trailing whitespace stripped"("
and")"
mpc_tok_braces(mpc_parser_t *a, mpc_dtor_t ad);
Matchesa
between trailing whitespace stripped"<"
and">"
mpc_tok_brackets(mpc_parser_t *a, mpc_dtor_t ad);
Matchesa
between trailing whitespace stripped"{"
and"}"
mpc_tok_squares(mpc_parser_t *a, mpc_dtor_t ad);
Matchesa
between trailing whitespace stripped"["
and"]"
Apply Functions
void mpcf_dtor_null(mpc_val_t *x);
Empty destructor. Does nothingmpc_val_t *mpcf_ctor_null(void);
ReturnsNULL
mpc_val_t *mpcf_ctor_str(void);
Returns""
mpc_val_t *mpcf_free(mpc_val_t *x);
Freesx
and returnsNULL
mpc_val_t *mpcf_int(mpc_val_t *x);
Converts a decimal stringx
to anint*
mpc_val_t *mpcf_hex(mpc_val_t *x);
Converts a hex stringx
to anint*
mpc_val_t *mpcf_oct(mpc_val_t *x);
Converts a oct stringx
to anint*
mpc_val_t *mpcf_float(mpc_val_t *x);
Converts a stringx
to afloat*
mpc_val_t *mpcf_escape(mpc_val_t *x);
Converts a stringx
to an escaped versionmpc_val_t *mpcf_escape_regex(mpc_val_t *x);
Converts a regexx
to an escaped versionmpc_val_t *mpcf_escape_string_raw(mpc_val_t *x);
Converts a raw stringx
to an escaped versionmpc_val_t *mpcf_escape_char_raw(mpc_val_t *x);
Converts a raw characterx
to an escaped versionmpc_val_t *mpcf_unescape(mpc_val_t *x);
Converts a stringx
to an unescaped versionmpc_val_t *mpcf_unescape_regex(mpc_val_t *x);
Converts a regexx
to an unescaped versionmpc_val_t *mpcf_unescape_string_raw(mpc_val_t *x);
Converts a raw stringx
to an unescaped versionmpc_val_t *mpcf_unescape_char_raw(mpc_val_t *x);
Converts a raw characterx
to an unescaped version
Fold Functions
mpc_val_t *mpcf_null(int n, mpc_val_t** xs);
ReturnsNULL
mpc_val_t *mpcf_fst(int n, mpc_val_t** xs);
Returns first element ofxs
mpc_val_t *mpcf_snd(int n, mpc_val_t** xs);
Returns second element ofxs
mpc_val_t *mpcf_trd(int n, mpc_val_t** xs);
Returns third element ofxs
mpc_val_t *mpcf_fst_free(int n, mpc_val_t** xs);
Returns first element ofxs
and callsfree
on othersmpc_val_t *mpcf_snd_free(int n, mpc_val_t** xs);
Returns second element ofxs
and callsfree
on othersmpc_val_t *mpcf_trd_free(int n, mpc_val_t** xs);
Returns third element ofxs
and callsfree
on othersmpc_val_t *mpcf_strfold(int n, mpc_val_t** xs);
Concatenates allxs
together as strings and returns resultmpc_val_t *mpcf_maths(int n, mpc_val_t** xs);
Examines second argument as string to see which operator it is, then operators on first and third argument as if they areint*
.
Case Study - Maths Language
Combinator Approach
Passing around all these function pointers might seem clumsy, but having parsers be type-generic is important as it lets users define their own ouput types for parsers. For example we could design our own syntax tree type to use. We can also use this method to do some specific house-keeping or data processing in the parsing phase.
As an example of this power, we can specify a simple maths grammar, that ouputs int *
, and computes the result of the expression as it goes along.
We start with a fold function that will fold two int *
into a new int *
based on some char *
operator.
mpc_val_t *fold_maths(int n, mpc_val_t **xs) {
int **vs = (int**)xs;
if (strcmp(xs[1], "*") == 0) { *vs[0] *= *vs[2]; }
if (strcmp(xs[1], "/") == 0) { *vs[0] /= *vs[2]; }
if (strcmp(xs[1], "%") == 0) { *vs[0] %= *vs[2]; }
if (strcmp(xs[1], "+") == 0) { *vs[0] += *vs[2]; }
if (strcmp(xs[1], "-") == 0) { *vs[0] -= *vs[2]; }
free(xs[1]); free(xs[2]);
return xs[0];
}
And then we use this to specify a basic grammar, which folds together any results.
mpc_parser_t *Expr = mpc_new("expr");
mpc_parser_t *Factor = mpc_new("factor");
mpc_parser_t *Term = mpc_new("term");
mpc_parser_t *Maths = mpc_new("maths");
mpc_define(Expr, mpc_or(2,
mpc_and(3, fold_maths,
Factor, mpc_oneof("*/"), Factor,
free, free),
Factor
));
mpc_define(Factor, mpc_or(2,
mpc_and(3, fold_maths,
Term, mpc_oneof("+-"), Term,
free, free),
Term
));
mpc_define(Term, mpc_or(2, mpc_int(), mpc_parens(Expr, free)));
mpc_define(Maths, mpc_whole(Expr, free));
/* Do Some Parsing... */
mpc_delete(Maths);
If we supply this function with something like (4*2)+5
, we can expect it to output 13
.
Language Approach
It is possible to avoid passing in and around all those function pointers, if you don't care what type is output by mpc. For this, a generic Abstract Syntax Tree type mpc_ast_t
is included in mpc. The combinator functions which act on this don't need information on how to destruct or fold instances of the result as they know it will be a mpc_ast_t
. So there are a number of combinator functions which work specifically (and only) on parsers that return this type. They reside under mpca_*
.
Doing things via this method means that all the data processing must take place after the parsing. In many instances this is no problem or even preferable.
It also allows for one more trick. As all the fold and destructor functions are implicit, the user can simply specify the grammar of the language in some nice way and the system can try to build a parser for the AST type from this alone. For this there are a few functions supplied which take in a string, and output a parser. The format for these grammars is simple and familiar to those who have used parser generators before. It looks something like this.
number "number" : /[0-9]+/ ;
expression : <product> (('+' | '-') <product>)* ;
product : <value> (('*' | '/') <value>)* ;
value : <number> | '(' <expression> ')' ;
maths : /^/ <expression> /$/ ;
String literals are surrounded in double quotes "
. Character literals in single quotes '
and regex literals in slashes /
. References to other parsers are surrounded in braces <>
and referred to by name.
Parts specified one after another are parsed in order (like mpc_and
), while parts separated by a pipe |
are alternatives (like mpc_or
). Parenthesis ()
are used to specify precedence. *
can be used to mean zero or more of. +
for one or more of. ?
for zero or one of. !
for negation. And a number inside braces {5}
to means so many counts of.
Rules are specified by rule name, optionally followed by an expected string, followed by a colon :
, followed by the definition, and ending in a semicolon ;
. The flags variable is a set of flags MPC_LANG_DEFAULT
, MPC_LANG_PREDICTIVE
, or MPC_LANG_WHITESPACE_SENSITIVE
. For specifying if the language is predictive or whitespace sensitive.
Like with the regular expressions, this user input is parsed by existing parts of the mpc library. It provides one of the more powerful features of the library.
mpc_parser_t *mpca_grammar(int flags, const char *grammar, ...);
This takes in some single right hand side of a rule, as well as a list of any of the parsers it refers to, and outputs a parser that does exactly what is specified by the rule.
mpc_err_t* mpca_lang(int flags, const char *lang, ...);
This takes in a full language (zero or more rules) as well as any parsers referred to by either the right or left hand sides. Any parsers specified on the left hand side of any rule will be assigned a parser equivalent to what is specified on the right. On valid user input this returns NULL
, while if there are any errors in the user input it will return an instance of mpc_err_t
describing the issues.
mpc_err_t* mpca_lang_file(int flags, FILE* f, ...);
This reads in the contents of file f
and inputs it into mpca_lang
.
mpc_err_t* mpca_lang_contents(int flags, const char *filename, ...);
This opens and reads in the contents of the file given by filename
and passes it to mpca_lang
.
Error Reporting
mpc provides some automatic generation of error messages. These can be enhanced by the user, with use of mpc_expect
, but many of the defaults should provide both useful and readable. An example of an error message might look something like this:
<test>:0:3: error: expected one or more of 'a' or 'd' at 'k'
Limitations & FAQ
Does this support Unicode?
mpc Only supports ASCII. Sorry! I welcome contributions as making the library support Unicode is non-trivial.
Backtracking and Left Recursion
mpc supports backtracking, but will not completely backtrack up a parse tree if it encounters some success on the path it is going. To demonstrate this behaviour examine the following erroneous grammar, intended to parse either a C style identifier, or a C style function call.
factor : <ident>
| <ident> '(' <expr>? (',' <expr>)* ')' ;
This grammar will never correctly parse a function call because it will always first succeed parsing the initial identifier. At this point it will encounter the parenthesis of the function call, give up, and throw an error. It will not backtrack far enough, to attempt the next potential option, which would have succeeded.
The solution to this is to always structure grammars with the most specific clause first, and more general clauses afterwards. This is the natural technique used for avoiding left-recursive grammars, so is a good habit to get into anyway.
factor : <ident> '(' <expr>? (',' <expr>)* ')'
| <ident> ;
An alternative, and better option is to remove the ambiguity by factoring out the first identifier completely. This is better because it removes any need for backtracking at all!
factor : <ident> ('(' <expr>? (',' <expr>)* ')')? ;
How can I avoid the maximum string literal length?
Some compilers limit the maximum length of string literals. If you have a huge language string in the source file to be passed into mpca_lang
you might encounter this. The ANSI standard says that 509 is the maximum length allowed for a string literal. Most compilers support greater than this. Visual Studio supports up to 2048 characters, while gcc allocates memory dynamically and so has no real limit.
There are a couple of ways to overcome this issue if it arises. You could instead use mpca_lang_contents
and load the language from file or you could use a string literal for each line and let the preprocessor automatically concatenate them together, avoiding the limit. The final option is to upgrade your compiler. In C99 this limit has been increased to 4095.