printersforants / mini-aftersherpa Goto Github PK

The newly updated Dragonfly cowling does not with with the standard screws (standard screws are m2.5x6)
The counterbore holes are not deep enough.
The counterbore needs to be ±1.5-2mm deeper in order to fit it.

Since the Revo voron cold mount is out on market it will be very nice to have a mount for it.

I’ve looked everywhere and no one has a carriage for that works with the Orbiter 2 and the hartk MGN9 on x Rail. Any way we can make this happen?

Hey, this isn't an issue but I was just wondering if you've got a duct which supports an orbiter v2 and/or E3D Revo Voron hotend?

Cheers,

RC

Hi
I might be wrong but I do not think the CAD Model for Mini-AS_TBG-Lite_Mounting_Adapter.stl has been uploaded
I would like to modify it to support the Hextrudort, this extruder uses the same bolt pattern but can not have the vertical plate.

Hi, I was quite happy when I saw you have that Hotends supported. I wanted to add support for https://github.com/zruncho3d/ZeroClick but unfortunatelly the CAD file does not include the support for that both hotends.

Could you update that?

The Sherpa micro adapter has a offset for the screws and filament path. Please test it before just uploading it to your github. Print out the sherpa micro housing_core and test the fit. Please fix the stl.

Hey,

i've opened every file 3 times now but I can't find the slide in mount for the V6 hotend. Am I just not finding it or is the file not uploadet?
Could you please check wether or not is is somewhere or upload the file.

BR,
Niklas

I use E3D V6 Bowden Heatsink and Orbiter v2.
Among the E3D V6 heatsinks, the 'Bowden' method has a collet.
If a heat sink for 'direct' use is used, the existing modeling is suitable.

I like the bimetal heatbreak.
some bimetal heatbreak products require a tube on top.
And it looks like you need a tube at the bottom of the Orbiter's filament guide.
So... the collet of the heatsink is an important existence.
The upper face of the body needs to protrude 3mm for the collet.
I personally tweaked the file you shared and found that a 3mm extrusion is the optimal height.

Please add a modified model for those who use a similar combination to me.

Hey,

is it Possible, that you add VZ Hextrudort Support with MGN9C rails and Umbilical Mod? That would be sick.

Do any of these cowling fit this hotend?

Hey,

im currently building a micron and I'd like to use 3010 fans for the hotend (Revo Voron). Is there any current mod? Is this a good idea?

Love this design. I'm currently converting a few of my printers to use the bambulabs hotend. Here's my design to fix a bambu on the mini-aftersherpa...

https://www.printables.com/model/562983-mini-aftersherpa-toolhead-design-for-bambulabs-hot.

Converted one Voron 0.1 so far - it's working well.

Is it possible to add the orbiter v2 Voron REVO adapter RGB NeoPixels mounts?

https://github.com/PrintersForAnts/Mini-AfterSherpa/blob/main/STL/Mini_AfterSherpa/Orbiter_V2_Toolhead_ONE-OFFS/Revo_Voron/Mini_AS_Revo_Voron_Orbiter_V2.stl

is it possible to somehow use a goliath hotend with this toolhead? i quite like it and would like to use my orbiter v2.0 and my goliath

I want to try the Sherpa Micro but it can't be mounted on the Mini-AfterSherpa.

Pretty please, with sugar on top?

Is it possible for us to get a cheaper toolhead for the dual gear extruder
(https://www.aliexpress.com/item/1005004186141062.html?spm=a2g0s.8937518.0.0.7bce2e0eNiz8Sc)
STEP link:https://drive.google.com/file/d/1v-6GjKYjTAMbKDbH-zMa1W4OttgJUjJe/view?usp=sharing

Hi! First, thanks for sharing this awesome design! I'm currently trying to get this to work with a Sherpa Mini and a Dragonfly BMO. While trying to mount the hotend I noticed that this doesn't work with the stock M2.5x8 bolts that come with the hotend.

The mounting holes of the Dragonfly aren't as deep as on the holes on the Dragon. They're only about 2.8mm deep going only through the first "floor" of the heatsink. So when trying to mount it, the screws can't be screwed all the way in. The counterbore on the Dragonfly holes is too deep.

The counterbore could be decreased by a few millimetres on the Dragonfly holes. However, on the version with with the guilder hole the guilder screw would then collide with the head of the mounting bolt because it now sits higher.

I've attached a section view that highlights the issue (the red part on the screw).

Here's what it would look like with 2.3mm less counterbore depth:

The TBG-Lite extruder is an alternative to the LGX lite extruder, with a slightly lower price and weight, and similar large drive gears.
I was wondering whether adding support for it to the Mini-AfterSherpa is possible and/or planned.

Trianglelab has released STEP files of the extruder which should help (can be found here).
Link to extruder

Hey,
thank you for this awesome project!

One question. Is it possible to mount this on the Voron 0.0, because everywere theres only written "V0.1".
If older versions would be supported to, i would expect just a V0 if it supports both.

Thanks you!