puyide / siphon Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/siphon
Automatically exported from code.google.com/p/siphon
Tried to dial 0 for my operator extension. The phone doesn't do anything.
Original issue reported on code.google.com by [email protected]
on 11 Oct 2008 at 4:53
What steps will reproduce the problem?
1. Connect to Freephonie
2. Certificat accepted
3.
What is the expected output? What do you see instead?
Siphon sometimes is Ok, I succeed to call 3 times someone but sometimes
said "registration error time out" or "Invalid URI (PJSIP-Einvaliduri)"
What version of the product are you using? On what operating system?
beta 5 on firmware 2.1
Please provide any additional information below.
I try in 2 different place. I will try other places
Original issue reported on code.google.com by [email protected]
on 1 Oct 2008 at 7:02
What steps will reproduce the problem?
1. Run Siphon
2. Click on Contacts
3. Choose a contact, click on the number
What is the expected output? What do you see instead?
The chosen number should be called, but it is NOT.
What version of the product are you using? On what operating system?
Alpha release, 2.4.2008
Please provide any additional information below.
contacts: after selecting a contact the phone number it seems is not sent to
the main app?
Original issue reported on code.google.com by [email protected]
on 3 Apr 2008 at 10:44
The call list doesn't store the calls made or missed.
Original issue reported on code.google.com by [email protected]
on 11 Oct 2008 at 4:53
What steps will reproduce the problem?
1. ipod touch 2.0.2
2. touchmods v1 mic
3. siphon 2.0
What is the expected output? What do you see instead?
very good sound but the person i'm calling can't hear me
What version of the product are you using? On what operating system?
Please provide any additional information below.
i think that the input used by the touchmods mic isn't supported anymore on
ipod touch 2.0.x
Original issue reported on code.google.com by [email protected]
on 9 Sep 2008 at 11:23
Hi,
I am running the latest version of siphon on FW1.1.3. I have configured my
TPAD (VOIP) settings on the siphon-settings menu. But everytime i launch
siphon, it opens up and then automatically closes again. And if i turn on
the log, i am not sure where the log file is stored. Pls advise.
Original issue reported on code.google.com by [email protected]
on 10 Jun 2008 at 6:15
What steps will reproduce the problem?
1. when you make or receive a call, the sound of callee is weak. It's not
important in a building but in the street you don't hear anything.
What is the expected output? What do you see instead?
I'd like it's possible to increase the sound level with iphone button or
slider for ipod (double click on home button)
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 2 Apr 2008 at 8:08
Siphon v1.2 doesn´t get calls-in. I tried with freedigits and nothing
happened. If you can help me with this contact me to
[email protected]
regards,
Tadeo Klappenbach
Original issue reported on code.google.com by [email protected]
on 1 Jun 2008 at 1:55
What steps will reproduce the problem?
1. Call asterisk extension numbers
2.
3.
What is the expected output? What do you see instead?
Make a phone call using the internal iPhone Mic.
The Mic seems to be on mute.
What version of the product are you using? On what operating system?
1.9.9 on firmware 1.1.3
Original issue reported on code.google.com by [email protected]
on 28 Jul 2008 at 3:58
What steps will reproduce the problem?
1. Open Siphon
2. GO back to the springboard
3. Receive a call, with daemon mode in operation
What is the expected output? What do you see instead?
Is some kind of signal supposed to pop out when receiving a call and out of
the program. The only time I can actually know someone is calling me, is
when I am in the program. The daemon mode is not of much use if this is the
case.
What version of the product are you using? On what operating system?
1.99 on 1.14
Please provide any additional information below.
Just tell me if this is normal, and if you have a plan to correct this. It
would be useful if a pop-up would open when receiving a call, whereever you
are on your ipod.
Original issue reported on code.google.com by [email protected]
on 25 Jul 2008 at 3:05
What steps will reproduce the problem?
1. Open Contacts Tab
2. Click The + sign to add a new contact
What is the expected output? What do you see instead?
I am pretty sure it switches to the Contacts.app, or for some reason the
navigation tabs along the bottom are missing.
What version of the product are you using? On what operating system?
Siphon 1.7.9.1, firmware 1.1.4
Please provide any additional information below.
Not much more info than that.
Oh, and why is there always a call icon in the status bar? Could you make
it go away when you exit the application in future versions, or make a
"quit" feature and then it will go away?
Original issue reported on code.google.com by [email protected]
on 21 Jun 2008 at 2:20
when calling another sip extension, I don't hear any ringback in the
iphone. The display just says "calling" until the other side answers the
call.
Original issue reported on code.google.com by [email protected]
on 23 Sep 2008 at 5:49
I downloaded code for siphone . but i am facing problem how to compile the
code . What settings is required for the compile the code . Anyone knows
please help me out .
Original issue reported on code.google.com by [email protected]
on 18 Jul 2008 at 2:29
What steps will reproduce the problem?
1. call out voice in ok voice out broken up
2. call in voice in ok voice out ok but accompanied by rhythmic noise
3.
What is the expected output? What do you see instead?
reasonable clear sound
What version of the product are you using? On what operating system?
1.9.9
Please provide any additional information below.
iPod Touch 16 GB firmware 1.1.4, Touchmods headset
Original issue reported on code.google.com by [email protected]
on 23 Jun 2008 at 10:08
Siphon works great on my 3G with 2.0.2
At the beginning, my calls didn't work and a screen appeared directly
with "appel termine" but after I retry and then all was fine.
I haven't try with the earphones yet but the sound quality is really
great !
There's some lags (when I open the contacts...) but I suppose they are due
to the FW 2.0x so, I'll try again this week end with 2.1
But there is just a real problem for me, when my calls are finished, the
app stay on the screen "appel termine", so I need to close and open it
again. And also, I don't have a dial tone at all, but maybe its normal via
SIP.
So, excellent sound, GREAT App !
Can't wait for its launch on the AppStore !
Original issue reported on code.google.com by [email protected]
on 10 Sep 2008 at 3:49
1. Installation of the beta version for iphone 2.0 / 3G
2. Configuration with freephonie setting
3. Dial the number
4. Push the button call
The number disappears and no phone call happens.
Original issue reported on code.google.com by [email protected]
on 9 Sep 2008 at 9:30
What steps will reproduce the problem?
1. Configure Siphon settings for use with a Gizmo5 account
2. Open Siphon
3. Attempt to make a call
What is the expected output? What do you see instead?
The number should begin dialing, instead the number disappears from the display
and nothing
else happens
What version of the product are you using? On what operating system?
1.9.9 on iPod Touch 1.1.4 JB
Please provide any additional information below.
Currently, the only solution to the problem is to open mobile safari and
navigate to the Gizmo
proxy: proxy01.sipphone.com. After that, calls work on that Wi-Fi network, but
if you go to a
new Wi-Fi network, in which case you have to do the same thing. This may have
already been
posted, but this has been a consistent inconvenience for me personally.
Original issue reported on code.google.com by [email protected]
on 24 Jun 2008 at 4:40
What steps will reproduce the problem?
1. Tap the contacts tab
2. Try to select the last contact on the list
3.
What is the expected output? What do you see instead?
expect to be able to select the contact, instead the contact is covered by tabs
What version of the product are you using? On what operating system?
iPod touch 8gb running JB 1.1.4
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 16 Jun 2008 at 6:49
What steps will reproduce the problem?
1. Update to Siphon 1.2
2. Go to Settings, and configure to register with a Asterisk PBX
What is the expected output? What do you see instead?
I expected registration to succeed, but it doesn't :-) The attached
capture shows that Siphon successfully replied to the 401 Asterisk sent,
and received a 200 OK.
What version of the product are you using? On what operating system?
Siphon 1.2 on a iPhone with firmware 1.1.4
Asterisk 1.2.26 on Linux
Please provide any additional information below.
See the attached capture file. The 200 OK is packet #10. Does Siphon
expect any header to be set to something else ?
Original issue reported on code.google.com by [email protected]
on 4 Mar 2008 at 4:35
Attachments:
I used beta4 and called my freeswitch ivr demo (ext 5000 on a standard
freeswitch install). Hitting the buttons to select an option was ignored
by freeswitch.
How is dtmf transmitted? Is it only inband or rfc2833?
Original issue reported on code.google.com by [email protected]
on 23 Sep 2008 at 5:46
What steps will reproduce the problem?
1. Installation of Beta 3 OK
2. error on opening Siphon (IMG 0010)
3. In the Siphon Setup, the Time out was 1800 (IMG 0011)
3 I changed it for 3600 (IMG 0012)
It works perfectly after that
I feel that the sound level was much higher than previously (as higher than in
a normal call)
Original issue reported on code.google.com by [email protected]
on 13 Sep 2008 at 8:47
Attachments:
Some providers require both.
Original issue reported on code.google.com by [email protected]
on 12 Jun 2008 at 3:59
Keypad doesn't work during a call.
iphone firmware 2.1
Original issue reported on code.google.com by [email protected]
on 11 Oct 2008 at 4:51
What steps will reproduce the problem?
1. Install last Siphon build
2. Configure Asterisk sip.conf (normal way, no special parameter, work fine
with other SIP/GSM phones) and configure Siphon "panel"
3. Launch Siphon, wait 10sec and see Siphon crash and iphone return to
SpringBoard
What is the expected output? What do you see instead?
Having Siphon Dial interface
What version of the product are you using? On what operating system?
Siphon.app.20080519.zip
Please provide any additional information below.
Asterisk work perfectly fine with other Wifi/GSM phones !!
Original issue reported on code.google.com by [email protected]
on 20 May 2008 at 3:11
Attachments:
What steps will reproduce the problem?
1. After Instal of Siphone over installer I have the Preverences of iPod
Touch on my iphone
2. It doesn´t help to uninstall Siphone.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
the newest of yesterday
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 12 Jun 2008 at 9:07
What steps will reproduce the problem?
1. Setup to login to Gizmo SIP account
Username: <sip_number>
Password: <password>
Proxy: proxy01.sipphone.com:5060
Domain: proxy01.sipphone.com
STUN: stun01.sipphone.com:3478
2. Setup GrandCentral to forward to Gizmo SIP #
3. Answer PhoneCall
What is the expected output? What do you see instead?
When GrandCentral connects the call, it plays a message, asking you to
press 1 to connect, 2 to send to voicemail, etc. When I press those
numbers on my iPhone, it doesn't recognize them. This works on a
GrandStream 2000 SIP Phone that I have, same configuration, I believe it's
just a difference in the way it handles DTMF, my GrandStream is set to send
DTMF via RTP (RFC2833).
What version of the product are you using? On what operating system?
1.9.4 from free.fr repo. iPhone 1.1.4
Original issue reported on code.google.com by [email protected]
on 4 Jun 2008 at 7:57
firmware 1.1.4
NAT, verified to be working and port-forwarded correctly to the right
addresses, with two
terminals stacked atop running tcpdump on different ethernet devices
pbx.gplhost.com server
The phone doesn't seem to record audio at all, and sends very few if any RTP
packets back
to the server.
How can I debug this issue?
Original issue reported on code.google.com by [email protected]
on 17 Sep 2008 at 9:01
Essentially, calls made from Siphon with the same settings as my hardware
phones have echo
cancellation issues.
I hear and sound fine on the iPhone, but remote parties hear a lot of echo.
It's mostly when the calls
are sent outside of the IP PBX in the big bad world. Call within our network
(LAN) display some echo
cancellation issues, but not the massive amount (you can fully hear yourself)
when talking to outside
callers.
I'm not sure how to debug this one. We use an Asterisk 1.4 / FreePBX 4.2 based
setup (PBX in a
Flash) and our hardware phones have no echo cancellation issues.
Other than that the calls sound great and Siphon works really well. Even when
the phone auto-
locks.
Original issue reported on code.google.com by [email protected]
on 10 Oct 2008 at 8:29
What steps will reproduce the problem?
1. first call a local landline (tested in Austria)
2. go to Contacts inside Siphon and try to "call" an email address by
simply choosing it from contacts.
What is the expected output? What do you see instead?
siphon calls the last called number, and meanwhile opens the mail app.
it should NOT call anything.
What version of the product are you using? On what operating system?
- just tested it with Siphon v.1.94 on a 114 iPhone:
Please provide any additional information below.
-
Original issue reported on code.google.com by [email protected]
on 14 Jun 2008 at 9:49
I translated the three files in italian, I hope that can be useful for you.
Original issue reported on code.google.com by [email protected]
on 14 Sep 2008 at 12:06
Attachments:
What steps will reproduce the problem?
1. I put the 2 files into the itunes
2. I started the synchronization
3. The backup ran without problem
4. Syphon was downloaded into iPhone
5. At the end of thedownload, my phone restarted and remaines in an endless
started procedure
6.I am restoring my phone
7. further information in a few hours
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
iPhone 2G
2.0.2 french
jailbreak, deSIMlocked
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 8 Sep 2008 at 10:38
At launch, the program send an errror : "Invalid value or argument(PJ_EINVAL)"
it's reproducible. (version ...hmm need to add one, date 10 sept 2008 ;-) )
Original issue reported on code.google.com by [email protected]
on 10 Sep 2008 at 7:35
Attachments:
What steps will reproduce the problem?
1. 8GB IPhone v1.1.4
2. Touchmods MIC
3. Body Glove 2.5 MM stereo headset with Mic, comes with 4 conductor 2.5MM
to 3.5MM adapter for use on Iphone (as stated by the packaging)
4. Configured to work with my TrixBox 2.5 system
What is the expected output? What do you see instead?
Two way audio during a call expected (of course) and I can hear them but
they cannot hear me.
What version of the product are you using? On what operating system?
I've tried 1.9.4 and 1.9.7 both from touchmods and from sip.free.fr
On a 8GB v1.1.4 Iphone (unlocked and jailbroke using ziphone's tools) I'll
try to get everything to compile 1.99 but at the moment I am not aware of
any binary's.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 15 Aug 2008 at 2:25
What steps will reproduce the problem?
1. Launch Siphon 1.9.7, and AddressBook empty
2. Receive a call
3. Siphon Crash
Siphon crahes immediately after pressing the "call" button if there is
no entry in the the AddressBook for the dialed number!!!
Thanks to Ruediger
Original issue reported on code.google.com by [email protected]
on 9 Jun 2008 at 6:55
The icon of the Siphon application in itunes on MacOSX isn't the Siphon
Icon. The Icon displayed is the default icon for app.
Original issue reported on code.google.com by [email protected]
on 29 Sep 2008 at 5:22
It will be great if you can define several account and select one by
default to call.
Original issue reported on code.google.com by [email protected]
on 10 Oct 2008 at 8:44
after my first bad experience (ID 26), I remove some ringtones and some
applications and try to reinstall Siphon.
No problems during the installation
Everything seems to work well
Setup of the SIP provider
Dialing a number
using the address book
registering a new favorite
I try my original earphone and my shure earphone with the adapor and microphone
for iphone
The only problem I get is the desynchronization of my iPhone headset. I just
have to reset it.
For the audio level, it is much better than with the first version.
Original issue reported on code.google.com by [email protected]
on 9 Sep 2008 at 11:12
What steps will reproduce the problem?
1. select settings/siphon
2. tap on one of the fields.
3. after your entry, the keyboard remains, there is no "done"
This does not affect usability, but it is a little annoying. You can get
rid of the keyboard by going to the previous screen.
Original issue reported on code.google.com by [email protected]
on 9 Sep 2008 at 7:17
After associating bluetooth to the 3G phone, try to make a call via siphon,
the audio is only through the phone, not the headset/handsfree device
Original issue reported on code.google.com by [email protected]
on 9 Sep 2008 at 7:19
What steps will reproduce the problem?
1. No Steps needed
What is the expected output? What do you see instead?
This is more a change request for beeing able to configure username and
authoization name different.
Example:
Username is user part of SIP URI: oetzi5678
Auth.name is used in SIP header Authorization: oetzi8765
What version of the product are you using? On what operating system?
iphone 1.1.4
Please provide any additional information below.
Example REGISTER with Username different Authorization name:
REGISTER sip:registrar.sip.com SIP/2.0
Via: SIP/2.0/UDP 192.0.2.4:5060;branch=z9hG4bKnashds7
Max-Forwards: 70
To: Bob <sip:[email protected]>
From: Bob <sip:[email protected]>;tag=456248
Call-ID: 843817637684230@998sdasdh09
CSeq: 1826 REGISTER
Contact: <sip:[email protected]>
Authorization: Digest
username="oetzi8765",realm="sip.com",nonce="dcd98b7102dd2f0e8b11d0f600bfb0c
093",uri="sip:[email protected]",qop=auth,nc=00000001,cnonce="0a4f113b",resp
onse="6629fae49393a05397450978507c4ef1",opaque="5ccc069c403ebaf9f0171e9517f
40e41"
Expires: 3600
Content-Length: 0
Thanks in advance
oetzi5678
Original issue reported on code.google.com by [email protected]
on 4 Jul 2008 at 9:19
What version of the product are you using? On what operating system?
Siphon 2 beta2 on iPhone 2.0.2
Siphon works fine and with a great sound (little echo on the other side
though). I've also tried Siphon through a VPN connexion (IPSec) and it
works also fine.
I have no more error e800001 when installing.
Would be nice to have history working and perhaps version number in the
welcome screen.
Original issue reported on code.google.com by [email protected]
on 11 Sep 2008 at 8:00
What steps will reproduce the problem?
1. Register SIP client in SIP proxy
2. SIP proxy send SIP-401 Unauthorized including "domain value" in WWW-
Authenticate header
3. SIP client ignore SIP-401 messages
What is the expected output? What do you see instead?
Client should challange authentication and implement SIP registration
What version of the product are you using? On what operating system?
1.2 with iphone Os 1.1.3
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 22 Apr 2008 at 8:11
Attachments:
What steps will reproduce the problem?
Not available yet
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
iPhone 3G; OS:2.0
Please provide any additional information below.
When is Siphon available for the new iPhone 3G? I really want to get it
running on my phone.
Original issue reported on code.google.com by [email protected]
on 30 Jul 2008 at 11:00
My address book has 1 800 MY APPLE as the number for Apple, Inc. The phone
dials just 1800 and
not the rest. An api to translate the letters to numbers would solve this.
/b
Original issue reported on code.google.com by [email protected]
on 11 Oct 2008 at 4:55
When the micro is activated, the CPU activity increases to 80-100%.
The process that uses CPU is mediaserverd.
Original issue reported on code.google.com by [email protected]
on 3 Apr 2008 at 9:16
What steps will reproduce the problem?
1. Make a call
2. Hang up before the cnx
3. Crash -sometimes-
CrashReporter :
Incident Identifier: 9543CCC9-4F34-4D6F-BBF7-E75B20E007ED
CrashReporter Key: 6d2816514632b7f2371e344a75f6e14bff98c20b
Process: Siphon [911]
Path: /var/mobile/Applications/90FD0E59-CD49-446A-B4A9-
4F2479904592/Siphon.app/Siphon
Identifier: Siphon
Version: ??? (???)
Code Type: ARM (Native)
Parent Process: launchd [1]
Date/Time: 2008-09-09 02:24:11.246 +0200
OS Version: iPhone OS 2.1 (5F116)
Report Version: 103
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x00000000, 0x00000000
Crashed Thread: 0
Thread 0 Crashed:
0 libSystem.B.dylib 0x31446cf0 __kill + 8
1 libSystem.B.dylib 0x31446cde kill + 4
2 libSystem.B.dylib 0x31446cd2 raise + 10
3 libSystem.B.dylib 0x314614b4 abort + 36
4 libSystem.B.dylib 0x3144bfdc __assert_rtn + 60
5 Siphon 0x000bd7f0 0x1000 + 772080
6 Siphon 0x00005354 0x1000 + 17236
7 Foundation 0x306949f4 __NSFireTimer + 132
8 CoreFoundation 0x30269dc8 CFRunLoopRunSpecific + 2642
9 CoreFoundation 0x30269360 CFRunLoopRunInMode + 44
10 GraphicsServices 0x315506bc GSEventRunModal + 268
11 UIKit 0x30a564dc -[UIApplication _run] + 480
12 UIKit 0x30a5fad4 UIApplicationMain + 1132
13 Siphon 0x00002c0c 0x1000 + 7180
14 Siphon 0x0000202c 0x1000 + 4140
Thread 1:
0 libSystem.B.dylib 0x31454b3c mach_msg_trap + 20
1 libSystem.B.dylib 0x31451c08 mach_msg + 60
2 CoreFoundation 0x30269788 CFRunLoopRunSpecific + 1042
3 CoreFoundation 0x30269360 CFRunLoopRunInMode + 44
4 WebCore 0x32b3117c RunWebThread + 340
5 libSystem.B.dylib 0x3144a81e _pthread_body + 34
Thread 2:
0 libSystem.B.dylib 0x31454b3c mach_msg_trap + 20
1 libSystem.B.dylib 0x31451c08 mach_msg + 60
2 GraphicsServices 0x315531a8 EventReceiveThread + 504
3 libSystem.B.dylib 0x3144a81e _pthread_body + 34
Thread 3:
0 libSystem.B.dylib 0x3140612c select$DARWIN_EXTSN + 20
1 libSystem.B.dylib 0x313e9bd2 select + 34
2 Siphon 0x0000f088 0x1000 + 57480
3 Siphon 0x0000c228 0x1000 + 45608
4 Siphon 0x0004ebf8 0x1000 + 318456
5 Siphon 0x00007278 0x1000 + 25208
6 libSystem.B.dylib 0x3144a81e _pthread_body + 34
Thread 4:
0 libSystem.B.dylib 0x3140612c select$DARWIN_EXTSN + 20
1 libSystem.B.dylib 0x313e9bd2 select + 34
2 Siphon 0x0000f088 0x1000 + 57480
3 Siphon 0x0000c228 0x1000 + 45608
4 Siphon 0x0007d674 0x1000 + 509556
5 Siphon 0x000c3bc0 0x1000 + 797632
6 Siphon 0x000c17f8 0x1000 + 788472
7 Siphon 0x00007278 0x1000 + 25208
8 libSystem.B.dylib 0x3144a81e _pthread_body + 34
Thread 5:
0 libSystem.B.dylib 0x31454b3c mach_msg_trap + 20
1 libSystem.B.dylib 0x31451c08 mach_msg + 60
2 CoreFoundation 0x30269788 CFRunLoopRunSpecific + 1042
3 CoreFoundation 0x30269360 CFRunLoopRunInMode + 44
4 AudioToolbox 0x3486c7c8 GenericRunLoopThread::RunLoop() +
44
5 AudioToolbox 0x34870d30 TRunLoop<AQClient>::Entry(void*)
+ 160
6 AudioToolbox 0x34825878 CAPThread::Entry(CAPThread*) + 208
7 libSystem.B.dylib 0x3144a81e _pthread_body + 34
Thread 0 crashed with ARM Thread State:
r0: 0x00000000 r1: 0x00000000 r2: 0x00000001 r3: 0x393e7b24
r4: 0x00000006 r5: 0x000e6134 r6: 0x00000f03 r7: 0x2ffff0f0
r8: 0x002cd090 r9: 0x3941d6d0 r10: 0x00206ca0 r11: 0x00000f03
ip: 0x00000025 sp: 0x2ffff0f0 lr: 0x31446ce5 pc: 0x31446cf0
cpsr: 0x000f0010
Original issue reported on code.google.com by [email protected]
on 10 Sep 2008 at 7:46
What steps will reproduce the problem?
1. Install Settings (but do NOT fill out anything related to the SIP account)
2. Start Siphon (will ask you to fill out the Settings)
3. Go back to Settings, fill everything correctly
4. Restart Siphon
What is the expected output? What do you see instead?
Siphon should run without a problem, instead, half of the screen is till
overlapped with the
warning screen asking for filling the Settings page out.
What version of the product are you using? On what operating system?
Alpha version from 1.4.2008
Please provide any additional information below.
that "settings scrteenshot" is present on the top halve of the appliation,
below the contacts and dial buttons are active, it seems i can also connect to
sip server,
but the upper halve of the Keypad (and Contacts list) is overlapped with that
white settings
screenshot.
Original issue reported on code.google.com by [email protected]
on 2 Apr 2008 at 8:55
Does Siphon support sip number format ?
How to enter this type of number ?
Does contact support this format ?
Contact.app iphone doesn't display @ . : for a sip number created in
contact.app on macOSX and
can't be used by Siphon - Contact.app on macOSX display all caracter.
Original issue reported on code.google.com by [email protected]
on 29 Sep 2008 at 10:11
What steps will reproduce the problem?
1. Send a REGISTER to a Sip Server
2. Receive a 401 Response from Sip Server with modified "sent-by" parameter
on the header field
3. Siphon does not send REGISTER with Authentication
What is the expected output? What do you see instead?
Siphon is discarding this message and outputs:
09:25:09.588 sip_endpoint.c Processing incoming message: Response msg
401/REGISTER/cseq=57128 (rdata0x83d264)
09:25:09.589 sip_endpoint.c Dropping response Response msg
401/REGISTER/cseq=57128 (rdata0x83d264) from 213.5.43.134:5060 because
sent-by is mismatch
It should send another REGISTER with Authentication.
What version of the product are you using? On what operating system?
Siphone 1.9.9
Please provide any additional information below.
This is probably related to http://trac.pjsip.org/repos/ticket/352. The sip
service provider is sip.i-call.gr in Greece. I cannot register my username
with the server due to this.
The following is showing the different Via header on the 401 received (when
running kphone - kde's sip client)
--------------------------------
REGISTER sip:i-call.gr SIP/2.0
Via: SIP/2.0/UDP 192.168.1.20;branch=z9hG4bK43C71C60
CSeq: 1797 REGISTER
...
...
SipClient: Received: 10:48:25.054
---------------------------------
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 192.168.1.20:58631;branch=z9hG4bK43C71C60;rport=58630
CSeq: 1797 REGISTER
...
...
Server: Altec Telecoms SIP Proxy
Content-Length: 0
Original issue reported on code.google.com by [email protected]
on 25 Jun 2008 at 7:49
What steps will reproduce the problem?
1.Siphon not open
What is the expected output? What do you see instead?
Ringing
"The number or the call access is'nt connected"
What version of the product are you using? On what operating system?
Beta 5
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 29 Sep 2008 at 6:39
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.