The following is a guide to getting started with the equipment. It also helps to ensure that the software and the equipment are working as expected. In this tutorial, you can expect a step by step guide on how to:

• Prepare your working environment
• Connect the equipment to your computer and other cables and pipes
• Setting up your Windows system
• Installing the main Software and setting it up
• Run and print the first Test

China Care Medical supplies medical, Lab, and veterinary Equipment in many countries. The company is committed to making quality medical tools more accessible to people while saving them time and money. Customers can order any (available) medical equipment online. ---> order online or get in touch with an approved local facilitator for a free quotation.

In this article, we'll take a closer look at the Biochemistry Analyzer CCL-210, one of the machines I had the privilege of installing in the Republic Democratic of Congo.

We assume some computer literacy and familiarity with medical tools to follow this article, but the author will do his best to be helpful. When it comes to advanced computer concepts or technical concepts, we will try to hold each other's hands and climb the mountain together. However, we won't be teaching how to use a computer or how to hold a mouse.

In simple terms the tools is designed to measure metabolites present in biological samples such as blood or urine.

The tedious part about getting human blood or other body fluid samples for testing is the actual analysis of each sample to test for anomalies. Traditionally, these tests were done manually by a human technologist who carefully examined each sample for results. Over time, however, it became apparent that the task takes too much time and effort, not allowing more than a few samples to be tested and analyzed every day. That is where the Biochemistry Analyzer intervine.

Also Known as a Full Automated Benchtop Clinical Blood Chemistry Biochemistry Analyzer CCL-210, is a tool used to measure the concentration of certain proteins, enzymes, electrolytes, metabolites, or even drugs in the provided samples of urine, blood, serum, plasma, or other body fluids. The machine consists of a tray where the samples are loaded to be tested. To reduce human error, the tool is controlled by a software installed on a computer. You can get a quottation or a fully live explanation of the product by a local representative here or order directly online at www.chinacaremedical.com.

If you're already have one but struggling with installations, you can get in touch with a local technician by filling out this form or just by following this handy how-to guide.

After buying your Full Auto Biochemistry Analyzer, you still need some other devices and setups to get the tool working.

1. Computer has nine-pin serial port and is connected to the Machine 💯✔️
2. The Biochemistry Analyzer has been turned on and The tempture has reached 37 degree 💯✔️
3. Printer ordinary A4, A5 paper printers can be used Successfully connected and installed 💯✔️
4. Pure water (Can be barreled pure water or pure water with pure water mechanism) 💯✔️
5. A waste tank needs to be prepared and waste pipe connected successfully💯✔️
6. Experimental equipment (pipette gun, bullet reservoir) 💯✔️
7. Biochemical reagents on site (Biochemical reagents must be refrigerated at 2-8 degrees) 💯✔️

Make sure that your computer has a nine-pin serial port. We recommend that you do not connect to power source until all the cable connections are done.

Here we're going to setup our Windows system to make it ready for the Biochemistry Analyzer software by:

• Creating or making sure that we have a partition dedicated for our program
• Add the D: drive to Windows Firewall whitelist
• Change the Current System Language to Chinese(simplified) and change the time zone
• Download and copy the Auto Chemistry Analyzer [software] (Auto Chemistry Analyzer-210 (1) (1).rar)
• Copy the software to the :D drive or the drive that is in th firewall whitelisted
• Unzip the file and Run the software

We recommend that you create a dedicated partition for this software. The software won't work if the drive is not in the firewall whitelist. You can deactivate the security of the system or put the system drive (C:) in the whitelist, but that will make your system vulnerable to virus attacks, and we do not recommend doing that. If you already have a D: drive skip this step.

If you do not have a partitioned drive, please watch the tutorial below on how to partition a C: drive and create a D: drive.

Tutorial how to create partitions. how to partition disk in windows 10

From your desktop in the Windows search box type Windows Security select the first result then go to ----> Virus & threat protection ---> Manage settings ----> Under Exclusions type Add or remove exclusions ---> (accept if prompt for admin permission) ---> 'Add an exclusion--->Folder---> Navigate to the drive (partitioned) select it andselect folder` to confirm the entry.

Congratulations, you just made your drive vulnerable 😊

Demo:

Your system might be different from the one in the above example and other screenshots in this tutorial, feel free to search on Google for your particular Operating System.

Unicode is a character encoding standard, developed by the Unicode Consortium, which defines a set of letters, numbers, and symbols that represent almost all of the written languages in the world. Its success in unifying character sets has led to widespread use in the creation of software source.

From your Destop search in the Windows search bar Region ----> Go to Clock and Region ----> Go to Region ---> navigate to Administrator Tab on the top most bar ---> Click on Change System Locale ---> Under Current System Locale, drop down the list and select Chinese (Simplified, China) Click OK and Restart your computer.

Now we're almost there. We need now to put the software in the drive that we just prepared, Unzip it and Run the Program.

Download the software here.

Copy the software to the :D drive or the drive that you just put in the firewall whitelist.

Unzip or extract the file using any .rar or .zip file extrator you can download a free winrar here

Demo:

Make sure that all the cables and pipes are connected from and to the computer.

1. Computer has nine-pin serial port and is connected to the Machine 💯✔️
2. The Biochemistry Analyzer has been turned on and The tempture has reached 37 degree 💯✔️
3. Printer ordinary A4, A5 paper printers can be used Successfully connected and installed 💯✔️
4. Pure water (Can be barreled pure water or pure water with pure water mechanism) 💯✔️
5. A waste tank needs to be prepared and waste pipe connected successfully💯✔️
6. Experimental equipment (pipette gun, bullet reservoir) 💯✔️
7. Biochemical reagents on site (Biochemical reagents must be refrigerated at 2-8 degrees) 💯✔️

Open the folder that you just Extract and double click on the file named MainSoft_V9.2.0.7.exe or MainSoft_V9.2.0.7.

If you followed all the instructions above correctly the software should open up and prompt for password. Enter 123 in the password field and login.

Congratulations! You've just made your Computer ready for your Auto Biochemistry Analyzer software.

Here we have a couple of things that we need to configure before running and printing our first test. Find the Setting Tab and enter the following basic informations:

⚠️ Make sure you press the Modify button to activate the text field. Located at the bottom part of the screen.

• Hospital Info
  • Enter basic information of your Hospital.
• Department Info
  • Enter Basic Information of the related department example: Biochimie.
• Physician Info
  • Enter Basic informatio about the Head Physician of the hospital.

• Password Editor
  • Here is where you get to modify the password of different Users.
  • On the left you get to modify the password of the current user.
  • On the right you get to change the current user (if you have multiple users registered.
• User Management
  • Here is where you get to register New Users. ⚠️ Make sure to press New on the bottom part of the screen to activate the text field
• Permission
  • Here is where you get to control what each registered User is allowed to do.
  • By default the Administrator have the right to do anything on the app.
  • If you want to experiment with the Permission feature, you need to Add an account of under User Management
  • If an account is registered (other then the Administrator account), It will appear here (Permission) on the left in red.
  • To modify the permission of an account or the task a particular user can perform on the App:
    • Highlight the account on the left it should be highlighted in red.
    • Navigate and get familiarised with different permissions.
• Workload Status
  • Once you have some tests setup and they will appear here. for now let us skip this part.

• This where you will configure the sequence of your tests. For now let us skip this part.

• Here is where you get to check if your printer is connected and working.
  • If your printer is connected and installed successfully, it will appear here under Current Printer.
  • If your printer supports only A4 paper format, change the page sizes.
    • Under Report Editor Locate Page Sizes, set it to A4 and Save the changes. ![printting_setting](https://user-images.githubusercontent.com/55901714/164994409-ef9bdd45-6543-4fc3-ac54-5d87e300cac0.gif

Now that you've entered all the basic information and setup your printer, it's time to test if the equipement is working. First we need to enter some data and parameter to let the computer know what kind of test we want to do. For a demo we're going to use Glucose as our reagent for sugar level test.

⚠️ The data that we're going to use are only for testing purpose. This is by no mean a trusted configuration for Glucose test. Feel free to enter your own data if you know what you're doing. Otherwise, seek help from qualified Physician or Laboratory assistant to help you with the measurements and units for different tests.

Navigate to the Reagent Tab on the top most part of your app.

Click on New and fill in the fields as shown bellow.

Navigate to the Calibration Tab on the top most part of your app. Then go to Calib Setup .

On the left under Calib Solution List, click New, enter any number or test as identifier of the calibration and hit Save On your right under Calib. Solution Concentrate click Modify then double click on the concentrate field.

Demo:

Now we need to set the location of the reagent on the to harmonize the flow of the machine. Pay close attention on the number we will select here and how we going to place the reagent and sample on the Wheel.

Navigate to the Status Tab on the top most part of your app. Then go to Reagent Wheel and find on the left side bottom part of the app Reagent Position Setup

Click on Reagent Position Setup highlight our reagent by pressing Gluc on the right located under Reagent info.

Now we're on the final part of our mission. We're going to request the Calibration Test. Navigate to the Samp. Test. Tab on the top most part of your app . Then go to Calibrated Req., highlight our Calib test under Calib. Test List by pressing on it. On left bottom part of the app under Calib Solution check ✔️ the first Calib solution, click on the drop down icon 🔽 and select the calib solution number that you entered on the Calib solution setting (mine is 123).

Demo:

Last but not least. We're going to Run and Print our first Test. Before we proceed let's do this boring but critical check:

1. Computer has nine-pin serial port and is connected to the Machine 💯✔️
2. The Biochemistry Analyzer has been turned on and The tempture has reached 37 degree 💯✔️
3. Printer ordinary A4, A5 paper printers can be used Successfully connected and installed 💯✔️
4. Pure water (Can be barreled pure water or pure water with pure water mechanism) 💯✔️
5. A waste tank needs to be prepared and waste pipe connected successfully💯✔️
6. Experimental equipment (pipette gun, bullet reservoir) 💯✔️
7. Biochemical reagents on site (Biochemical reagents must be refrigerated at 2-8 degrees) 💯✔️

Fill the Triangle shapped bottle with reagent and place it on the wheel number1 as shown on the pic bellow and place the sample tube or cup on the sample wheel number1 as shown bellow.

Navigate to the Run select our test under Test Stand By and run the test by pressing Run located and the bottom right most part of the app.

Once the test has finished, Navigate to the Results Tab . Fill in the patient info, highlight the test under Result Details and print the test