quen0n / unitemp-flipperzero Goto Github PK
View Code? Open in Web Editor NEWFlipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more
License: GNU General Public License v3.0
Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more
License: GNU General Public License v3.0
Would be nice to see absolute humidity implemented here.
Here is my working implementation as an example (calculation explained here):
// Calculate absolute humidity - For more info refer to https://github.com/Mywk/FlipperTemperatureSensor/issues/1
// Calculate saturation vapour pressure first
vapour_pressure = (double)6.11 * pow(10, (double)(((double)7.5 * celsius) / ((double)237.3 + celsius)));
// Then the vapour pressure in Pa
vapour_pressure = vapour_pressure * rel_humidity;
// Calculate absolute humidity
abs_humidity = (double)2.16679 * (double)(vapour_pressure / ((double)273.15 + celsius));
Since we're at it, would also be nice to have a simple way of checking the temperature in fahrenheit (e.g. with a button click):
fahrenheit = (celsius * 9 / 5) + 32;
Hello! Your Temp sensors reader app version 1.3 fails to build with the SDK version 0.98.1-rc f7. Please update the app in your repository and create a new pull request to the catalog repository with the updated manifest file.
IMPORTANT: Don’t forget to update the app version and commit version in the manifest file.
Issue even if firmware not upgraded - FW 0.88.0
Hello. I would like it to be possible to enable logging of values with time on the SD card
The BME680 has a gas sensor for measuring VOCs. Perhaps the app could display this figure as well? Currently the implementation is essentially the same as the cheaper BME280 sensor.
Hello, i don't want to download binaries from russian server because of some considerations and would like to build the plugin from source. Could you please provide some informations about the build process (linux) or at least put a link to the already existing documentation.
Many thanks and regards,
Gena
Unitemp will not run on flipper zero since latest update. It gives an error, and not loading, saying-
Preload failed GPIO/unitemp-latest.fap Update application to use with this firmware (ApiTooOld)
Hello!
Your Temp sensors reader app version 1.4
fails to build with the SDK version 0.102.0-rc f7
. Please update the app in your repository and create a new pull request to the catalog repository with the updated manifest file.
IMPORTANT: Don’t forget to update the app version and commit version in the manifest file.
Flipper Team
https://github.com/quen0n/unitemp-flipperzero/blob/master/views/General_view.c#L19 includes unitemp_icons.h, however when building:
applications_user/unitemp-flipperzero/views/General_view.c:19:10: fatal error: unitemp_icons.h: No such file or directory
19 | #include "unitemp_icons.h"
| ^~~~~~~~~~~~~~~~~
compilation terminated.
Looking through this repository I can't find the header file in question. Could it be that it is missing or a mistake happened in a merge? Thanks!
Hello!
Your Temp sensors reader app version 1.4
fails to build with the SDK version 0.97.0-rc f7
. Please update the app in your repository and create a new pull request to the catalog repository with the updated manifest file.
IMPORTANT: Don’t forget to update the app version and commit version in the manifest file.
Flipper Team
Bonsoir, dans apps/GPIO Temp Sensors Reader ne fait pas fonctionner mon DHT11. Le 5v fonctionne, même en essayant divers entrées 2,3,4 .... Mon DHT11 fonctionne parfaitement sur arduino mega.
Good evening, in apps/GPIO Temp Sensors Reader does not work my DHT11. The 5v works, even trying various 2,3,4 inputs.... My DHT11 works perfectly on arduino mega.
Hi All,
i have connected BME280 sensor to Flipper Zero. It shows temperature and humidity fine but for pressure it only shows one value - 734 mm/hg. I have connected that very same sensor to Raspberry Pi and on Pi it shows the correct pressure and it changes as it should. Is it something that can be solved?
Greetings! I am from Flipper Devices team and would like to say thank you for submitting your app to the catalog. We are finalizing API prior to 1.0 release and currently your application cannot be built for latest toolchain. Currently we are testing 0.95.0-rc and app is not being built for that version.
We are currently working on automating the messages from our build server, so this one is manual :)
If you have any questions, just tag me
Hello,
I was wondering if it would be possible to show the pressure at one more precision digit, a.k.a. in hectopascals (with 0, 1 or 2 decimals).
The kPa setting shows the correct pressure, although at very low precision, while hPA shows unreadable measurements (e.g. -350123).
Also, would it be possible to choose whether to show the dewpoint instead of relative humidity? The formula is very straighforward:
alpha = ln(relativeHumidity/100) + 17.625*temperatureC/(243.04+temperatureC)
dewpoint = (243.04×alpha) / (17.625-alpha)
Thank you!
The fractional part of the temperature user interface element (in F) appears to be duplicated in the fractional part of the inHg user interface element. The fractional parts are always the same and update at the same time. (Example, temp F is XX.7 then inHg will be YY.7).
Hello! Your Temp sensors reader app version 1.3 fails to build with the SDK version 0.98.2-rc f7. Please update the app in your repository and create a new pull request to the catalog repository with the updated manifest file.
IMPORTANT: Don’t forget to update the app version and commit version in the manifest file.
Hello!
Your Temp sensors reader app version 1.4
fails to build with the SDK version 0.96.0-rc f7
. Please update the app in your repository and create a new pull request to the catalog repository with the updated manifest file.
IMPORTANT: Don’t forget to update the app version and commit version in the manifest file.
Flipper Team
Getting wrong valeu at hpa pressure of BMP/BME280 sensor. It shows -29890. (At 1012 hpa what it shut be).
Mm Hg,in Hg, kPa looks ok
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.