Analyzes the section 'LOEWDIN REDUCED ORBITAL POPULATIONS PER MO' in ORCA output files.

ORCA: https://orcaforum.kofo.mpg.de/

Output will be written to 'o-analysis.txt'. Up to four plots will be created. The program needs write permissions in the output folder!

Usage:

(python) orca_orb.py -options ORCA.out

Options are -t, -o, -c, -a, -ncsv (see below).

• Atoms are numbered items, e.g. 0, 1, 2, 3 (which are associated to Elements)
• Elements are elements of the periodic table, e.g. C, N
• Orbital refers to the orbital in the 'LOEWDIN REDUCED ORBITAL POPULATIONS PER MO' section
• Atomic orbitals or AOs are s, p, d, and f orbitals
• Contributions to orbitals (in %) can be contributions from Atoms, a group of Atoms (=Elements) and/or AOs.
• The sum of all contributions of Atoms of the same Element is equal to the contribution of the respective Element to the orbital.
• If a contribution or a sum of contributions is lower than a certain Threshold the contribution may not be included in the output of the program.
• Constraints refer to a selection of analyzed Atom or Element contributions.

O-analysis.txt contains tables that summarize contributions of elements (C, N, O, Fe...), atoms (0, 1, 2 as they appear in the input) and AOs (s, p, d, f) to orbitals listed under 'LOEWDIN REDUCED ORBITAL POPULATIONS PER MO'. In case of spin unrestricted calculations contributions to alpha and beta orbitals are listed separately. All contributions are given in '%'. Example.

To reduce the size of the output a threshold in '%' can be defined (-t or --threshold). Only (summarized) atom (including AOs) contributions higher or equal to the given threshold will be printed. The threshold is not valid for the first (two) tables (element contributions to orbitals) and the bar plot(s).

The bar plot el-cntrb-a.png visualizes the contribution (in %) of elements to orbitals. A given threshold or constraints are not valid for this plot. In case of spin unrestricted calculations respective plots for alpha (...-a.png) and beta (...-b.png) orbitals will be created.

Restarting the program deletes all plots. Example:

The heat map a-cntrb-a.png shows the contribution (in %) of atoms to orbitals. Values are printed if the size of the heat map is not to large. Otherwise different colors indicate high or low contributions. All contribution below the threshold or zero contributions are '0' or have a black color. In case of spin unrestricted calculations respective plots for alpha (...-a.png) and beta (...-b.png) orbitals will be created. Example:

The heat map ao-cntrb-Element/Atom-a.png shows the contribution (in %) of the atomic orbitals (s, p, d, f) of a specific atom in a range of orbitals. The heat map will be created if the -a parameter is invoked with a specific atom number or atom numbers, e.g. -a0 or -a0,1,2. All contribution below the threshold or zero contributions are '0' or have a black color. A heat map for a selected atom might not be created if the contribution of the atom (or the respective AOs) is below a given threshold in the selected orbital range. In case of spin unrestricted calculations respective plots for alpha (...-a.png) and beta (...-b.png) orbitals will be created. Example:

Restarting the program deletes all plots.

A range of orbitals can be defined with the -o (--orbitals) parameter. It should be noted that all orbitals from the ORCA output will be processed first and that the orbital selection is done in a second step. At least one argument is expected after -o. If the -o parameter is not given all orbitals will be included in the analysis.

Examples:

-o3            : processes orbital number 3
-oh or oHOMO   : processes the HOMO
-oh10          : processes all orbitals from HOMO-10 to HOMO+10
-o0-10 or o0:10: processes all orbitals from 0 to 10

Analysis can be constrained to selected elements or atoms using the -c (--constraints) parameter. Elements or atoms not present in the ORCA output file will be ignored without warning. The input is case sensitive and
multiple elements or atoms must be separated by commas (','). Atom and elements constraints cannot be mixed. At least one argument is expected after -c. If the -c parameter is not given, all atoms and elements will be included in the analysis. The constraints are not valid for the first (two) tables (element contributions to orbitals) and the bar plot(s).

Examples:

-cC      : analysis is constrained to carbon atoms
-cC,N    : analysis is constrained to carbon and nitrogen atoms
-cC,N,Zz : analysis is constrained to carbon and nitrogen atoms, 
           since element 'Zz' has not been found in the ORCA output file 
-c1      : analysis is constrained to atom 1
-c1,4,5  : analysis is constrained to atom 1, 4 & 5

-c1,N    : not possible: analysis is constrained to atom 1, N will be ignored
-cC,3    : not possible: analysis is constrained to carbon atoms, 3 will be ignored
-c1N     : not possible: analysis is constrained to atom 1, N will be ignored
-cC3     : not possible: analysis is constrained to carbon atoms, 3 will be ignored

The -a parameter with atom (numbers) as additional argument(s) creates the AOs in orbitals heat maps. If constraints are operative they might interfere with atoms given after -a. So if carbon atoms are excluded from the analysis, a heat map of the AOs of carbon atom 5 (-a5) will not be created. Threshold is effective as well. See the 'Heat map(s)' section for more details. In case of spin unrestricted calculations respective plots for alpha (...-a.png) and beta (...-b.png) orbitals will be created.

Examples:

-a1      : a heat map of the AOs of atom 1 will be created
-a1,4,5  : heat maps of the AOs of atom 1, 4 & 5 will be created

-cCu -a1 : not possible if atom 1 is not copper

In a first step all information listed under 'LOEWDIN REDUCED ORBITAL POPULATIONS PER MO' will be read, and written to a large table. The naming scheme is orca.out.csv. In subsequent analyses the program uses this file which makes analyses much faster. For creating a new CSV file, the option -ncsv can be used.

If you restart a calculation with different parameters you should always use the -ncsv option, otherwise the program uses a previous orca.out.csv which does not agree with the result of the recent calculation.

The plot section crashes without notice if a large number of orbitals (~1000) is processed. Plot artifacts may occur at even lower numbers of orbitals. The text out is not affected.

The program favor an existing orca.out.csv over creating a new one. Besides filenames the program does not check whether the recent ORCA output matches the CSV file. Using the -ncsv option (forces the program to create a new CSV file) solves the issue.

Threshold and constraints are not valid for the first (two) tables (element contributions to orbitals) and the bar plot(s).

Orbitals from HOMO-10 to HOMO+10 with iron contributions >= 5% will be analyzed:

orca_orb.py -t5 -cFe -oh10 my-calc.out

Orbitals from 0 to 10 with contributions of atoms 1 & 3 >= 10% will be analyzed:

orca_orb.py -t10 -c1,3 -o0:10 my-calc.out

All orbitals with contributions from all elements (or all atoms) >= 4.2% will be analyzed:

orca_orb.py -t4.2 my-calc.out

All orbitals with contributions from all elements (or all atoms) >= 5% will be analyzed. Furthermore plots of the contributions from AOs of atom 0 and 1 in all orbitals will be created:

orca_orb.py -t5 -a0,1 my-calc.out

Have fun!