You need at least version 3.7.3. Refer this link to install GNU Radio https://gnuradio.org/redmine/projects/gnuradio/wiki/InstallingGR

1. gr-spread: https://bitbucket.org/daulpavid/gr-spread

2. gr-cdma: https://github.com/anastas/gr-cdma

3. gr-802.15.4: https://github.com/bastibl/gr-ieee802-15-4

4. gr-802.11: https://github.com/bastibl/gr-ieee802-11

5. gr-foo: https://github.com/bastibl/gr-foo.git

The dependencies and installation intructions are provided in the above links.

• CIG is based and tested on USRP N210 with SBX Daughterboard.
• Raspberry Pi Model B+
• WiFi Dongle: http://www.adafruit.com/product/1030
• XBee Module: http://www.adafruit.com/products/964
• XBee expansion board: http://www.adafruit.com/products/247
• Bluetooth Dongle: https://www.digitec.ch/en/s1/product/asus-usb-bt400-usb-20-network-adapters-630793?tagIds=7
• BLE Dongle: https://www.bluegiga.com/en-US/products/bled112-bluetooth-smart-dongle/

• iPerf: https://iperf.fr/
• l2ping: http://linuxcommand.org/man_pages/l2ping1.html
• Raspbian OS: https://www.raspbian.org/

Contains the grc files which are used as a base for constructing the flowgraphs. The generated python files from the flowgraphs are further edited to configure them according to device specifications.

Contains flow graphs and scripts to record and packpay the behavior of the devices used which are specified above. The RX and TX Gain, Bandwidth and the Sampling rate is configured according to the device specifications. The distance between the device and USRP is 2mts.

Contains the scripts to generate and control the interference of prevalent wireless devices operating in the 2.4GHz ISM band

Run the ./cigusrp.sh to know the devices present and configuartion of the CIG.

Contains the scripts to configure Raspberry Pi as a traffic generator of ZigBee, WiFi, Bluetooth and BLE.

Run ./cig-rpi to configure the Raspberry Pi as a traffic generator