rakwireless / rak811_loranode Goto Github PK

I'm using the Open Source SDK guide. In the file Commissiong.h, I enter my values Device Address, Network Session Key, App Session Key. Then build project.And flash RAK811 with st-link v2. But I can't connect to the gateway! Нelp please!

Hi, im using LoraWan OTAA in Rak811 Breakout Board. I want to know if its possible to decrease the time to get a Join request. This is my timing:

14:56:17.928 -> Welcome to RAK811.
14:56:17.928 -> Selected LoraWAN 1.0.2 Region: US915
14:56:18.029 -> Waiting for join
14:56:23.484 -> at+recv=3,0,0
14:56:23.484 -> Joined ok!
14:56:23.484 -> Msg: 10 Sending..
14:56:24.876 -> at+recv=2,0,0
14:56:24.876 -> TX_UNCOMFIRMED ok!

So i need wait like 5.5 seconds. It's possible to reduce this? Its a normal timing to get it Rak811?

I have the antenna RX close to me (5 meters outside of the room)

Hello, when i try to connect my loranode, appears the next message: "ERROR: RUI_AT_LORA_INFO_STATUS_JOIN_FAIL 99" how can i debug this? thanks a lot.

I'm using:

• RUI_RAK811_BOOT_Version3_0_2.bin
• RUI_RAK811_V3.0.0.12.H.T_Release.bin

I'm working with the RAK811 and I notice when you set some configuration the module return OK when success but you need to wait about 1 second.
Probably the module is saving the configuration on the flash...
This kinda delay is normal or this issue can be removed?!

Firmware 2.0.3.3 HF is actually LF