OpenSCAD library of various objects to use in Raspberry Pi-based projects

This is a simple library of objects that I designed to assist myself in creating various projects based on the Raspberry Pi. The main goal is to have a realistic representation of the size of the overall assemble, to aid in building a suitable case for the projects. I used the same OpenSCAD software to design 3D-printed or laser-cut cases.

One of the first goal where I used this library, was to design a case for a little Media Hub, based on the Raspberry Pi. The case is designed to be made of Medium-density fibreboard (MDF) with laser cutting.

See the img/README.md file for a gallery of snapshot images.

• Raspberry Pi Model B v.2
• Raspberry Pi Model A+ rev.1.1
• Raspberry Pi 3 Model B v.1.2

• 1602A LCD panel 16x2 characters
• SainSmart Two-relays module
• Keyes Two-relays module
• PCD8544 LCD module, blue PCB, pins below
• PCD8544 LCD module, red PCB, pins above
• GPS u-blox NEO-6
• GYBMEP: BME280 pressure, humidity and temperature sensor
• GY-521: MPU-6050 Accelerometer and Gyroscope
• GY-273: QMC5883L 3-Axis Magnetic Sensor
• X835 SupTronics 3.5 SATA HDD shield for the Raspberry Pi

• Coaxial power plug 5.0 mm
• Coaxial power plug socket, with 2.1 mm pin
• Mini push button
• Metal momentary push switch 8 mm
• Matrix of 2.54 mm dupont female connectors
• Matrix of 2.54 mm female connectors
• Matrix of 2.54 mm pins
• Pin header, 2.54 mm, right angle, low profile
• Pin header, 2.54 mm, right angle, high profile
• USB male Type-A connector
• USB male Micro-B connector

• USB external hard disk 2.5" (Toshiba)
• SATA 3.5 inches hard disk
• UBS 2.0 hub 7 ports, Amazon Basics
• UBS 3.0 hub 4 ports, Amazon Basics (WARNING: does not work with the Raspberry Pi, VIA Labs chip, USB ID 2109:2811)
• UGREEN USB Audio Adapter
• Nano WiFi USB dongle by Edimax