rogerlz / doron-velta Goto Github PK

In the BOM, it says that "350-400mm length of rail is recommended". What does this mean exactly? Normally rail lengths for printer BOMs are fairly specific: how should this provided range be interpreted?

This is a well done Voron like design so kudos to you, for not being great at CAD I'd say you're doing really well.
This isn't an issue per se but a curiosity. I'm curious as to why you didn't go with magnetic ball arms instead?

Please provide STL files for 3D printing

Can you please add the used power inlet to the bom.
Should be IEC320 C14 inlet if I'm right.

The linked ones are no longer available to buy.

The aluminium bed plate has three small (~2.4mm diameter) holes in it, as highlighted below:

What is the purpose of these holes? According to the CAD model, they don't attach to anything, and they're only big enough for M2 hardware.

Hi Seti here,

I'm just checking fixings and with the feet in the CAD the M5x60 is too short, this needs to be at least an M5x70 to engage properly with the extrusion. I have printed mine, but ripped the model straight from the CAD, so I would assume that the standard Voron v2/Trident feet will have the same issue.

Please provide STL files for 3D printing

Would it be possible to provide these?

The BOM specifies NEMA17s, but doesn't state what length will fit the build.

Do you know of or have any information to make this sensorless for A, B, C?