Latest working macOS: 13.2.1 (22D68)

Current OpenCore: 0.9.0 MOD (binaries)

• CPU: Intel 13900k @ 5.8GHz
  • Cooling:
    • Noctua NH-D15 (with Thermal Grizzly Kryonaut)
    • 6x Noctua Fans around the case for airflow
• Motherboard: Gigabyte Z690 AORUS ELITE AX DDR5
• GPU:
  • AMD Radeon RX 6900 XT (Main)
  • AMD Radeon RX 550 4GB LP (PowerColor Red Dragon - To be used when I switch to 7900XTX or 4090)
• WiFi/Bluetooth: Fenvi T919 with wired antennas
• Ethernet: Realtek RTL8125B PCI Express 2.5 Gigabit Ethernet
• RAM: 64GB @ 5400 MHz DDR5
• NVME SSD:
  • 500GB WD BLACK SN850 Gen.4 NVMe PCIe SSD (macOS)
  • 500GB Samsung 980 PRO Gen.4 NVMe PCIe SSD (Windows)
  • 500GB Kingston A2000 Gen.3 NVMe PCIe SSD (Linux)
• SATA SSD:
  • 4TB Samsung Evo 860 SATA SSD (shared with macOS, Windows and Linux - formatted as exFAT)
• Power Supply: Seasonic Prime PX - 1000W
• PC Case: NZXT H710 (important because front usb ports are mapped)

Full hardware specs and prices on PCPartPicker

SMBIOS: iMacPro1,1

The system triple boots Windows 11 and Ubuntu Mate

Don't be an idiot and use these great tools instead of wasting your time with propertree or other plist editors:

• OpenCore Configurator - easy config.plist management
  • OpenCore Auxiliary Tools - alternative
• Hackintool - debug and map USB ports

Warning

Use the modded OpenCore version to prevent Windows thinking you're running in BootCamp and creating multiple issues around ACPI. Why isn't this the default OC behaviour is beyond me.

1. Make sure to update your BIOS, disable CSM support and secure boot, enable XHCI Hand-off (for Airdrop/Continuity/Sidecar) and enable XMP.
2. Create an macOS Ventura USB-Installer Stick, install OpenCore and copy my EFI folder (how?)
3. Generate a new serial number, motherboard id, ROM (that's your motherboard's mac address without dots) and SMUUID (make sure serial number is invalid in order to iMessage/Facetime to work) (how?)
4. Boot the new macOS partition
5. Copy the EFI to the local disk

Note

Enable HiDPI Display settings by running sudo defaults write /Library/Preferences/com.apple.windowserver.plist DisplayResolutionEnabled -bool true and rebooting the PC

Here are some tips and tricks and the full OpenCore Documentation

• macOS Ventura
• WiFi and Bluetooth + Airdrop + Sidecar + Continuity (OOB via Fenvi T919)
• Audio
• HDMI/DP (with VRR)
  • Note that the RX550 can only output to HDMI
• Most USB ports (Capped at macOS limit of 15)
• Everything iCloud related (Drive, iMessage, Facetime, unlock with Apple Watch, etc)
• Intel Quick Sync (if you enable iGPU in BIOS)
• Temperature monitoring
• Resizable Bar Support (enable Above 4G Decoding in BIOS)
• Shutdown/Reboot/Update to newer macOS builds over time

• Returning from sleep won't wake up the display. You need to re-plug the DP or HDMI cable. This is probably because of the RX550 hack.

Note

The RX550 hack can be disabled by removing the -radcodec boot arg and disabling the 550.aml ACPI patch.

I mapped both USB 3.0 ports and USB-C port of the case (front), all USB 2.0 ports, another 3 USB 3.0 ports (first ones coming down) + USB-C port on motherboard. Create your own mapping on Windows using USBToolBox

This setup beats the Mac Studio 2022 (M1 Ultra 20-core) and the Mac Mini 2023 (M2 Pro) on Xcode compiling time. This hackintosh is the best developer machine possible, even beating M2 Pro Macs.

• Lilu
• Whatevergreen
• AppleALC
• VirtualSMC + SMCProcessor + SMCSuperIO
• CpuTopologyRebuild
• RestrictEvents
• CpuTscSync
• USBPorts (USBToolBox + USBMap)
• NVMeFix
• LucyRTL8125Ethernet

• OpenCanopy
• OpenRuntime
• OpenLinuxBoot (optional)
• OpenHfsPlus (optional)
• AudioDxe (optional, for boot chime)

• Luchina Gabriel
• MaLd0n
• insanelymac
• tonymacx86

Fuck /r/Hackintosh mods for not allowing EFI sharing, forcing people to use propertree and other trash instead of great GUI apps