Welcome to the TinyMCE monorepo. For TinyMCE itself look to the modules/tinymce folder.
As TinyMCE transitioned to a modern codebase through 2017 and 2018 many external dependencies were added from previously closed-source projects. This became unweildy to develop, so in June 2019 the decision was made to bring those projects together in a monorepo.
This repo is built with Yarn workspaces and uses publish tooling support from Lerna. NPM is not supported and attempts to use it will fail.
An important feature of this monorepo is the use of TypeScript 3.0 features "project references" and "build mode": https://www.typescriptlang.org/docs/handbook/project-references.html
These are still quite new and some of the tooling is still catching up (e.g. webpack needs tsc -b -w
running in the background).
Most monorepos use a packages
folder to hold the included projects, but we have chosen modules
instead. There are few reasons for this:
- These projects are not extra packages of TinyMCE, they are self contained libraries used as module dependencies for the editor.
- Enough examples exist of projects not using
packages
that we don't think it will be difficult to understand - It tab completes better (
packages
overlaps withpackage.json
)
Install Node.js on your system. Clone this repository on your system
$ git clone https://github.com/tinymce/tinymce.git
yarn
yarn build
This will produce an editor build in modules/tinymce/js
, with distribution zips in modules/tinymce/dist/tinymce_[number].zip
.
yarn dev
This performs compilation steps which webpack requires but are usually once-off. It also runs tsc
to make later commands faster (tsc -b
enforces incremental compilation).
To build the editor in development, use yarn tinymce-grunt
. This will output to the modules/tinymce/js
folder (build
is effectively dev
followed by tinymce-grunt
).
Task names can be included, for example yarn tinymce-grunt bundle
will execute the bundle task. More information on TinyMCE grunt tasks is available in the TinyMCE readme.
There are many top-level helper scripts for TinyMCE and Oxide (the default skin) defined in package.json
.
yarn start
This boots the TinyMCE webpack dev server at http://localhost:3000 and also starts a TypeScript watch process. With this running changes to any .ts
source file in the monorepo (excluding tests) should be reflected in WebPack within a few seconds.
If WebPack later adds supports for TypeScript build mode the background TypeScript watch process won't be necessary which will speed up round trip time.
yarn watch
runs tsc -b -w
for those times when you don't need to iterate in the browser.
yarn tsc
an alias to tsc -b
just in case you forget
yarn tslint
runs tslint
in all projects, with a rule set that is far more strict than most projects were previously subject to. This is a good source of things to improve when bored.
yarn tinymce-grunt
easy access to the TinyMCE grunt commands from the root folder.
yarn oxide-build
yarn oxide-icons-build
These commands build the skin and icons but should not normally be required outside of other development scripts.
yarn oxide-start
will set up a watch and rebuild process for creating custom skins.
If you are working in a single module and don't want to deal with the overheads of whole-monorepo compilation, you can run yarn --focus
from that module's folder to install the latest published versions of monorepo projects in a local node_modules
. For more information see this yarn blog post:
https://yarnpkg.com/blog/2018/05/18/focused-workspaces/
Testing relies on yarn lerna changed
to determine which modules need testing, and a grunt script then separates them into two groups depending on whether they need GUI browser testing or can be tested with phantomjs.
yarn browser-test
yarn phantomjs-test
yarn browser-test-manual
yarn phantomjs-test-manual
Development testing will be adjusted in future so that there's only one manual entry point for ease of development. They are still separate for now because there are two projects that use bedrock route configurations; a route config combination process is required to run them at the same time.
CI builds rely on the ci
and ci-all
package.json scripts, in addition to the above testing scripts, to run type checking and linting before executing the full test suite. A ci-local
package.json script has also been added for convenience to simulate this process in development and then run tests.
It is important that you never hand-edit a package.json
file, particularly the dependency
and version
fields. And we do mean never. Doing so may break the automated scripts. See the publishing
section below for more information.
All dev dependencies are in the project root, so to add or upgrade a specific dependency:
yarn add -D -W <package>
To add a dependency inside a monorepo package:
yarn workspace <fullname> add <othername>
This works whether adding an external dependency or a dependency on another monorepo package.
Note that both names must be the entire scoped name
of the package, not the folder, for example
yarn workspace @tinymce/oxide add @tinymce/oxide-icons-default
We have a CI process set up to publish all changed libraries as patch releases twice a day. This simply describes that process, is is not intended that it be performed manually.
In the future these will likely be automated via the lerna-supported conventional commit specification, for now this is done manually.
In theory minor bumps can be done in the package.json by hand but for consistency we recommend using the lerna tooling for both. yarn lerna version
is the only way to do this without breaking links between packages.
For each changed package choose major, minor or patch as appropriate depending on the flow-on effects of this version change. Afterwards, you must run the git commands below to push the version and related tags correctly.
Changes to minor and major versions are such a rare occurence that this manual process will suffice until we switch to conventional commits. Unfortunately manual version changes mean the next automated build will run all repository tests, since nothing has changed, but that's probably a good idea for serious version changes anyway.
yarn lerna publish patch
This is configured via lerna.json
to exclude TinyMCE. We will not be using lerna to publish TinyMCE itself as it places far greater importance on the version number than library projects.
yarn lerna publish from-package
This is run after publish patch
to catch cases where lerna version
was run manually for a non-patch bump. It compares the source version to the NPM registry and publishes anything that doesn't match.
Lerna's publish process is configured to not git push
in case of failure, so after a successful publish this must be done manually:
git push
git push --tags