Dumping Sega Cards with the Retron 3-in-1 adapter about cartreader HOT 3 OPEN

Hi,
At the time of writing, the Retron 3-in-1 adapter is not supported to read SEGA Cards. Current code works with SMS / GG carts (and MARK III / SG-1000 ones if you use a Retrofreak adapter instead of Retron) but not the SEGA Cards yet.

I think the only way to dump some of them with OSCR is currently by using an official My Card adapter, plugged into a Mark III slot. picture
With this setup, I've dumped a few EUR and JPN cards. BUT, be warned that it worked for around 50% of the cards I've tested. Many of them are still not well detected.

from cartreader.

I believe @PsyK0p4T dumped some of the cards, but wasn't able to get them all to properly dump. He might have some info to share though!

from cartreader.

Alright, thanks for the quick response! I was just worried I was doing something obviously wrong - of course, it would be great if support could be implemented eventually, but it's good to know that I wasn’t at fault here or anything.

from cartreader.