sbcshop Goto Github PK

roundyfi

RoundyFi is a round LCD display based on ESP-12E along with a compact and stylish 1.28-inch display module of 240×240 resolution, 65K RGB colors, clear and colorful displaying effect, expand its engagement with your project. RoundyFi comes with an embedded GC9A01 Driver and SPI Interface that minimize the required IO pins.

roundypi

RoundyPi is a round LCD display based on RP2040 along with a compact and stylish 1.28-inch display module of 240×240 resolution, 65K RGB colors, clear and colorful displaying effect, expand its engagement with your project. RoundyPi comes with an embedded GC9A01 Driver and SPI Interface that minimize the required IO pins.

rp2040-hat-expansion

rs485-can-hat

RS485 CAN HAT is a multi node communication module, to communicate with devices in a long-range, designed dedicatedly for Raspberry Pi with an operating voltage of 3.3 V, CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230 that is controlled via UART.

sb-rfid-hat

This is a Raspberry Pi RFID HAT Module operating in the 125Khz frequency range. It supports two communication interfaces: UART for RFID and I2C for Oled Display.

sb-serial-expansion-hat

A guide to install and use SB- Serial expansion HAT on Raspberry pi with examples.

sb_serial_servo

SB Serial Servo Code for Serial UART Communication via computer, Raspberry Pi, and Arduino.

sbcshop

sbcshop.gtihub.io

This is introduction to Shop SB Components

scangenie_hardware

The hardware design files for ScanGenie are available on this GitHub.

scangenie_software

This GitHub page offers a step-by-step tutorial for using ScanGenie.

spi-box

Motion Activated Security Camera based on Raspberry Pi 2/3/3B+. User can capture images or videos based on motion and email the captured images/videos.

squary_consoles

Squary Console is the ultimate experience for your SquaryPi and SquaryFi. It is a unique concept to mount any combination of SquaryPi and SquaryFi for an amazing experience.

squary_consoles_hardware

Squary Console is the ultimate experience for your SquaryPi and SquaryFi. It is a unique concept to mount any combination of SquaryPi and SquaryFi for an amazing experience. Squary Consoles are modular yet strong enough to hold any combination of SquaryPi & SquaryFi you can think of.

squaryfi-hardware

SquaryFi is an ESP-12E-based square LCD display that features a compact and appealing 1.54-inch display module.

squaryfi-software

SquaryFi is an ESP-12E-based square LCD display that features a compact and appealing 1.54-inch display module.

squarypi-hardware

SquaryPi is a square LCD display based on the RP2040, with a tiny and attractive 1.54-inch display module with 240x240 pixels resolution. It consist of on board SD Card slot for storing data you want to display, accelerometer, and three user buttons. It includes an inbuilt st7789 Driver and I2C Interface to reduce the number of IO pins required for

squarypi-software

SquaryPi is a square LCD display based on the RP2040, with a tiny and attractive 1.54-inch display module with 240x240 pixels resolution. It consist of on board SD Card slot for storing data you want to display, accelerometer, and three user buttons. It includes an inbuilt st7789 Driver and I2C Interface to reduce the number of IO pins required for

stackypi

StackyPi is a compact and advanced board that is designed with the RP2040 Micro-controller, which provides one set of 2x20 pin headers on which you can connect Raspberry Pi HATs. It means that one can plug HAT designed for Raspberry Pi and run it via the Pico Zero RP2040 that would make the user perform the advanced functions on it.

test_stembit

type_c_breakout

A Type-C breakout board is a hardware component that provides easy access to the pins and functionalities of a USB Type-C connector

uhf-hat-for-raspberrypi-hardware

UHF HAT for Raspberry Pi is an advanced and compact "Ultra High Frequency" RFID reader that consists of powerful RFID technology designing for a broad range of applications in the defense, healthcare system, banks, offices etc. UHF HAT for Raspberry Pi has an onboard ThingMagic® M6E Nano UHF RFID Reader that is JADAK’s smallest embeddable module wi

uhf-hat-for-raspberrypi-software

UHF HAT for Raspberry Pi is an advanced and compact "Ultra High Frequency" RFID reader that consists of powerful RFID technology designing for a broad range of applications in the defense, healthcare system, banks, offices etc. UHF HAT for Raspberry Pi has an onboard ThingMagic® M6E Nano UHF RFID Reader that is JADAK’s smallest embeddable module with ultra-low power consumption and tiny form factor. This RFID reader is ideal for battery operated, low-cost, small form factor portable devices.

uhf_lite_hat_hardware

UHF (Ultra High Frequency) Lite HAT is a radio frequency device that operates in the frequency range of 300 MHz to 3 GHz. UHF modules are commonly used in wireless communication systems, including radio-frequency identification (RFID) systems, Wi-Fi networks, and other short-range wireless communication applications.

uhf_lite_hat_software

UHF (Ultra High Frequency) Lite HAT is a radio frequency device that operates in the frequency range of 300 MHz to 3 GHz. UHF modules are commonly used in wireless communication systems, including radio-frequency identification (RFID) systems, Wi-Fi networks, and other short-range wireless communication applications.

uhf_lite_module

The UHF RFID Lite Module is a highly efficient and reliable RFID technology that is designed to help businesses streamline their inventory management, asset tracking, and supply chain management processes.

uhf_lite_pico_expansion_hardware

The frequency range of the UHF (Ultra High Frequency) Lite Expansion, a radio frequency device, is 300 MHz to 3 GHz. Wireless communication systems, such as radio-frequency identification (RFID) systems, Wi-Fi networks, and other short-range wireless communication applications, frequently employ UHF modules.

uhf_lite_pico_expansion_software

The frequency range of the UHF (Ultra High Frequency) Lite Expansion, a radio frequency device, is 300 MHz to 3 GHz. Wireless communication systems, such as radio-frequency identification (RFID) systems, Wi-Fi networks, and other short-range wireless communication applications, frequently employ UHF modules.

uhf_max_breakout_hardware

UHF MAX Breakout is an advance and compact "Ultra High Frequency" RFID reader that consists of powerful RFID technology designing for a broad range of applications in the defense, healthcare system, banks, offices etc.

uhf_max_breakout_software

UHF MAX Breakout is an advance and compact "Ultra High Frequency" RFID reader that consists of powerful RFID technology designing for a broad range of applications in the defense, healthcare system, banks, offices etc.