In "Checkpoint 3: Deploy it!", the hardhat.config.js file instruction does not show the correct explanation for changing to a different network. When changing the network to rinkeby, the correct code should read const defaultNetwork = 'rinkeby';

The image below shows what the current instructions on the site show - const defaultNetwork = 'NETWORKS.rinkeby'; which leads to an error in the console.

Description

Branch: challenge-0-simple-nft

Checkpoint 5: 📜 Contract Verification

When verifying a contract with a newly created API key from etherscan users might encounter the following error when running yarn verify since it can take roughly 5 minutes for the API key to become active.

contract YourCollectible failed to submit : "NOTOK" : "Invalid API Key" [object Object]

Steps to Reproduce

Note: The speed with which you complete these steps will impact the outcome.

1. Create a new API key on etherscan
2. Add the API key to the yarn verify script in packages/hardhat/package.json
3. Run yarn verify (with the --network of your choice)
4. The console logs an "Invalid API Key" error

Resolution

Perhaps a small note could be added to the Contract Verification section explaining that it might take a few minutes for the Etherscan API key to become active.

Can’t automatically merge. Don’t worry, you can still create the pull request.

Occasionally the roll animation will get stuck in the rolling state, and the roll button will stay disabled until page reload.

I got an issue, When I clone 'challenge-1-decentralized-staking' I got yarn error see:

On the Checkpoint 3: 💾 Deploy it! 🛰 of 🚩 Challenge 0: 🎟 Simple NFT Example - TYPESCRIPT

When I'm running the command yarn run generate it throw error:

Error HH100: Network georli doesn't exist

The following block is still appearing in the speedrunethereum.com instructions for Challenge 1, in Checkpoint 5. It is commented out in the github instructions, but is showing as plaintext on SRE.com:

Challenge-7-create-stream needs built out.

I have to update the test code to

        await network.provider.send("evm_increaseTime", [28])

to pass the test, otherwise, it generates error
ProviderError: Error: VM Exception while processing transaction: reverted with panic code 0x11 (Arithmetic operation underflowed or overflowed outside of an unchecked block)
at HttpProvider.request (node_modules/hardhat/src/internal/core/providers/http.ts:49:19)
at GanacheGasMultiplierProvider.request (node_modules/hardhat/src/internal/core/providers/gas-providers.ts:297:34)
at processTicksAndRejections (node:internal/process/task_queues:96:5)

Code error : Failed to verify contract on Etherscan NomicLabsHardhatPluginError: The constru
ctor for contracts/Vendor.sol:Vendor has 1 parameters
but 0 arguments were provided instead.

Fix : await run("verify:verify", {
address: vendor.address,

    constructorArguments: [yourToken.address],
  });

replace contract arguments with constructor arguments

Approval is needed if expected token amount exceeds allowance.

The current logic doesn't take into account the expected token amount. Instead it compares allowance to the ethValuePlusExtra:

)

The expected token amount is
(ethValue.mul(dexTokenBalance).div(dexEthBalance)).add(1),
according to the smart contract logic:

So we don't need ethValuePlusExtra at all, instead we should check for smth like

dexApproval.gte(expectedTokenAmount)

Challenge-3-muti-sig needs to be built out.

Tried installing challenge-1-decentralized-staking using yarn and then using npm, both failed

Yarn install fails.
Looks like it is the missing content at https://codeload.github.com/hugomrdias/concat-stream/tar.gz/057bc7b5d6d8df26c8cf00a3f151b6721a0a8034

Here are some details:

Yarn version:
1.22.19

Node version:
18.17.1

Platform:
linux x64

Trace:
Error: https://codeload.github.com/hugomrdias/concat-stream/tar.gz/057bc7b5d6d8df26c8cf00a3f151b6721a0a8034: Request failed "404 Not Found"
at ResponseError.ExtendableBuiltin (/<local_path>/.nvm/versions/node/v18.17.1/lib/node_modules/yarn/lib/cli.js:696:66)
at new ResponseError (/<local_path>/.nvm/versions/node/v18.17.1/lib/node_modules/yarn/lib/cli.js:802:124)
at Request. (<local_path>/.nvm/versions/node/v18.17.1/lib/node_modules/yarn/lib/cli.js:66215:16)
at Request.emit (node:events:514:28)
at module.exports.Request.onRequestResponse (<local_path>/.nvm/versions/node/v18.17.1/lib/node_modules/yarn/lib/cli.js:141767:10)
at ClientRequest.emit (node:events:514:28)
at HTTPParser.parserOnIncomingClient (node:_http_client:700:27)
at HTTPParser.parserOnHeadersComplete (node:_http_common:119:17)
at TLSSocket.socketOnData (node:_http_client:541:22)
at TLSSocket.emit (node:events:514:28)

npm fails
Here are the details:

/<local_path>/.npm/_logs/2023-08-31T13_14_33_660Z-debug-0.log

npm resolution error report

While resolving: @scaffold-eth/[email protected]
Found: @testing-library/[email protected]
node_modules/@testing-library/dom
dev @testing-library/dom@"^6.12.2" from @scaffold-eth/[email protected]
packages/react-app
@scaffold-eth/[email protected]
node_modules/@scaffold-eth/react-app
workspace packages/react-app from the root project

Could not resolve dependency:
peer @testing-library/dom@">=7.21.4" from @testing-library/[email protected]
node_modules/@testing-library/user-event
@testing-library/user-event@"^12.1.8" from @scaffold-eth/[email protected]
packages/react-app
@scaffold-eth/[email protected]
node_modules/@scaffold-eth/react-app
workspace packages/react-app from the root project

Fix the upstream dependency conflict, or retry
this command with --force or --legacy-peer-deps
to accept an incorrect (and potentially broken) dependency resolution.

Challenge-0-simple-nft needs to be built out.

if you dont enter 0 before the decimal it goes to a white screen.

In the it's a trap section:

is the notCompleted modifier really meant to protect execute and withdraw?
Don't we instead just want to protect stake to prevent more funds from being locked in?
Otherwise this seems to let people add in more funds, but then can't call execute nor withdraw anymore.

Problem

The vscode settings file is pointing to the wrong directory for the solidity node modules, right now it is "solidity.packageDefaultDependenciesDirectory": "packages/hardhat-ts/node_modules". The problem here is that the hardhat-ts folder does not exist.

Possible Solution

change "solidity.packageDefaultDependenciesDirectory": "packages/hardhat-ts/node_modules" to "solidity.packageDefaultDependenciesDirectory": "packages/hardhat/node_modules"

I get this error after run yarn chain and when i run yarn start

• I got this error:

Logger.makeError
/home/arnaud/challenge-1-decentralized-staking/packages/src.ts/index.ts:213
Logger.throwError
/home/arnaud/challenge-1-decentralized-staking/packages/src.ts/index.ts:225
(anonymous function)
/home/arnaud/challenge-1-decentralized-staking/packages/src.ts/index.ts:234
rejected
http://localhost:3000/static/js/0.chunk.js:94577:32
This screen is visible only in development. It will not appear if the app crashes in production.
Open your browser’s developer console to further inspect this error.  Click the 'X' or hit ESC to dismiss this message.```

When you paste an address into the AddressInput you cannot delete and paste another or type one in.

Description

The gitpod environment serves ports at specific urls, instead of on a single served URL. While this usually isn't an issue, because the react application is at a served port 3000, URL requests to a different port URL don't pass a CORs check. This causes breaks in the application when making requests to the localhost chain, making it unusable.

How to Reproduce

1. Navigate to https://gitpod.id/#https://github.com/scaffold-eth/scaffold-eth-challenges/tree/challenge-0-simple-nft
2. When the application and tasks are fully loaded, open the browser preview at port 3000. The application should appear.
3. After a few seconds you should see the error seen in the screenshot below.

Error Information

Access to fetch at 'https://8545-amethyst-condor-919k7bwb.ws-us25.gitpod.io/' from origin 'https://3000-amethyst-condor-919k7bwb.ws-us25.gitpod.io' has been blocked by CORS policy: Response to preflight request doesn't pass access control check: No 'Access-Control-Allow-Origin' header is present on the requested resource. If an opaque response serves your needs, set the request's mode to 'no-cors' to fetch the resource with CORS disabled.

Considerations

• This might be a security hole since the test application now has a public port open. I would recommend allowing it for users that want to get through the challenge, but make it clear its open in the README.
• Is anyone really supporting gitpod?

When trying yarn surge windows users will get this error.

Easy fix is for them to remove cp from the surge script in package.json under react-app.

"surge": "cp build/index.html build/200.html && surge ./build"

When minting NFTs in Challenge 0, the frontend throws an error when attempting to mint any more than 8 NFTs. Error: ×
Unhandled Rejection (HTTPError): Too Many Requests.

I'm a newbie and I hope to learn more, thanks for your answers.

There is an error in Challenge 5.
First of all, there was a path mistake for useLookupAddress import in AddressInput.jsx, which I believe to have fixed in #58 (comment)

But even after this fix, clicking on either of the two wallets in the frontend results in:

Hello, I recently followed the steps on this repository to run the Ethereum app for the NFT challenge. My problem comes after I run the command yarn start.
From the terminal, there is no error message, and the localhost page GUI loads successfully. However, after about 5 seconds, it crashes and shows me the following error:

Even after the error, the terminal does not show anything wrong, but if I run yarn deploy from another window, it fails because it cannot connect to the network localhost.

It is worth noting that I run this code successfully just about 1 or two weeks ago. I did not change anything. I simply ran the same commands. I'm using Ubuntu 20.04 and Firefox. Additionally, I am not very familiar with internet communication protocols, which seem to be the problem here.
Is there a simple thing that I should pay attention to? It is confusing to me because this was working before and now it is not. Thanks for the help in advance.

Challenge-4-oracle needs built out.

people usually use metasask for transaction, so better to add network on your metamask, you can use this config to connect with metamask

yarn deploy fails on node 17.4.0.

Here is the upstream issue NomicFoundation/hardhat#2239

Maybe it's worth adding a warning?

https://speedrunethereum.com/challenge/simple-nft-example

I'm finishing up what's in this tutorial. But when I run the ‘yarn start ’command, it reports an error.

What I should do to solve this error?
Thanks.

Description

Branch: challenge-0-simple-nft

⚔️ Side Quests > 🐟 Open Sea

The user interface on the Open Sea collections page has been updated. The instructions and screenshots in the side quest no longer correspond with what is shown on the Open Sea website.

Steps to Reproduce

1. Navigate to the opensea collections screen as instructed in the side quest
2. Click the vertical ellipsis
3. Validate that the "Import an existing smart contract" option is no longer available

Resolution

The side quest instructions and screenshots to create a collection for an existing smart contract on Open Sea should be updated to correspond with the new user interface.

Challenge-6-nft-marketplace needs built out.

Occasionally the app will crash and require the user to refresh the browser.

To recreate the Error:

Spin up challenge-0-simple-nft with yarn, wait, and the app should crash.

Error message:

Unhandled Rejection (Error): call revert exception (method="getReserves()", errorArgs=null, errorName=null, errorSignature=null, reason=null, code=CALL_EXCEPTION, version=abi/5.4.0)

Logger.makeError
/Users/mojo/projects/eth/challenge-0-simple-nft/packages/src.ts/index.ts:213
Logger.throwError
/Users/mojo/projects/eth/challenge-0-simple-nft/packages/src.ts/index.ts:225
Interface.decodeFunctionResult
/Users/mojo/projects/eth/challenge-0-simple-nft/packages/src.ts/interface.ts:425
422 | const value = values[index];
423 | if (param.indexed) {
424 | if (param.type === "string") {
> 425 | topics.push(id(value));
| ^ 426 | }
427 | else if (param.type === "bytes") {
428 | topics.push(keccak256(value));
View compiled
Contract.
/Users/mojo/projects/eth/challenge-0-simple-nft/packages/src.ts/index.ts:332
fulfilled
http://localhost:3000/static/js/0.chunk.js:78806:24

Checkpoint 2: 🖨 Minting
✏️ Mint some NFTs! Click the MINT NFT button in the YourCollectables tab. When press MINT NFT Button this error occur :

Transaction Error
Cannot read property 'gasPrice' of undefined

During node install of challenge-0-simple-nft got error:

warning Error running install script for optional dependency: "/home/devl/gitcoin/scaffold-directory/challenge-0-simple-nft/node_modules/keytar: Command failed. Exit code: 1 Command: prebuild-install || node-gyp rebuild Arguments: Directory: /home/devl/gitcoin/scaffold-directory/challenge-0-simple-nft/node_modules/keytar Output: prebuild-install WARN install No prebuilt binaries found (target=16.13.1 runtime=node arch=x64 libc= platform=linux)

Node 16.13.1 Ubuntu 18.04.4

An optional dependency, but was a concern.

Installing Ubuntu module libsecret-1-dev apparently solves it.

[4/4] Building fresh packages...
[-/21] ⠁ waiting...
[15/21] ⠁ ursa-optional
[16/21] ⠁ keytar
[-/21] ⠁ waiting...
warning Error running install script for optional dependency: "/root/challenge-1-decentralized-staking/node_modules/keytar: Command failed.
Exit code: 1
Command: prebuild-install || node-gyp rebuild
Arguments:
Directory: /root/challenge-1-decentralized-staking/node_modules/keytar
Output:
prebuild-install WARN install No prebuilt binaries found (target=16.17.0 runtime=node arch=x64 libc= platform=linux)
gyp info it worked if it ends with ok
gyp info using [email protected]
gyp info using [email protected] | linux | x64
gyp info find Python using Python version 3.7.3 found at "/usr/bin/python3"
gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args '/usr/local/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args 'binding.gyp',
gyp info spawn args '-f',
gyp info spawn args 'make',
gyp info spawn args '-I',
gyp info spawn args '/root/challenge-1-decentralized-staking/node_modules/keytar/build/config.gypi',
gyp info spawn args '-I',
gyp info spawn args '/usr/local/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',
gyp info spawn args '-I',
gyp info spawn args '/root/.cache/node-gyp/16.17.0/include/node/common.gypi',
gyp info spawn args '-Dlibrary=shared_library',
gyp info spawn args '-Dvisibility=default',
gyp info spawn args '-Dnode_root_dir=/root/.cache/node-gyp/16.17.0',
gyp info spawn args '-Dnode_gyp_dir=/usr/local/lib/node_modules/npm/node_modules/node-gyp',
gyp info spawn args '-Dnode_lib_file=/root/.cache/node-gyp/16.17.0/<(target_arch)/node.lib',
gyp info spawn args '-Dmodule_root_dir=/root/challenge-1-decentralized-staking/node_modules/keytar',
gyp info spawn args '-Dnode_engine=v8',
gyp info spawn args '--depth=.',
gyp info spawn args '--no-parallel',
gyp info spawn args '--generator-output',
gyp info spawn args 'build',
gyp info spawn args '-Goutput_dir=.'
gyp info spawn args ]
/bin/sh: 1: pkg-config: not found
gyp: Call to 'pkg-config --cflags libsecret-1' returned exit status 127 while in binding.gyp. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: gyp failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:284:16)
gyp ERR! stack at ChildProcess.emit (node:events:513:28)
gyp ERR! stack at Process.ChildProcess._handle.onexit (node:internal/child_process:291:12)
gyp ERR! System Linux 4.19.0-20-amd64
gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /root/challenge-1-decentralized-staking/node_modules/keytar
success Saved lockfile.
Done in 399.39s.

$ hardhat run scripts/publish.js
✅ Published contracts to the subgraph package.
Done in 6.05s.
gitpod /workspace/scaffold-eth-challenges (challenge-0-simple-nft) $ yarn start
yarn run v1.22.19
$ yarn workspace @scaffold-eth/react-app start
warning package.json: No license field
$ node ./scripts/create_contracts.js
$ react-scripts --openssl-legacy-provider start
/home/gitpod/.nvm/versions/node/v16.19.0/bin/node: bad option: --openssl-legacy-provider
error Command failed with exit code 9.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.
error Command failed.
Exit code: 9
Command: /home/gitpod/.nvm/versions/node/v16.19.0/bin/node
Arguments: /home/gitpod/.nvm/versions/node/v16.19.0/lib/node_modules/yarn/lib/cli.js start
Directory: /workspace/scaffold-eth-challenges/packages/react-app
Output:

info Visit https://yarnpkg.com/en/docs/cli/workspace for documentation about this command.
error Command failed with exit code 9.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.

I wasn't able to get through the first checkpoint with this error.

I tired on VS code on my machine and with gitpod.io

I was doint the challenge-2 and following the instructions. I came to transfer ownership step and uncommented the code at this line. I have provided my frontend address but somehow it's giving me this error:

yarn run v1.22.19
$ yarn workspace @scaffold-eth/hardhat deploy --reset
$ hardhat deploy --export-all ../react-app/src/contracts/hardhat_contracts.json --reset
Nothing to compile
deploying "YourToken" (tx: 0xe5375d58ee48aa8b33b3b97b79d503eb3d7a3c92b90ac312a2d386209a16ff1b)...: deployed at 0x5FbDB2315678afecb367f032d93F642f64180aa3 with 637479 gas
deploying "Vendor" (tx: 0x2df0779ea222307500ecc0e0201255f2bf84c3f53e9810c588b3aeb5b3b92ec0)...: deployed at 0xe7f1725E7734CE288F8367e1Bb143E90bb3F0512 with 331303 gas

 🏵  Sending all 1000 tokens to the vendor...


    ✅ confirming...


 🤹  Sending ownership to frontend address...

An unexpected error occurred:

Error: ERROR processing /home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/deploy/01_deploy_vendor.js:
TypeError: vendor.transferOwnership is not a function
    at Object.module.exports [as func] (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/deploy/01_deploy_vendor.js:33:45)
    at processTicksAndRejections (node:internal/process/task_queues:96:5)
    at DeploymentsManager.executeDeployScripts (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat-deploy/src/DeploymentsManager.ts:1055:22)
    at DeploymentsManager.runDeploy (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat-deploy/src/DeploymentsManager.ts:891:5)
    at Environment._runTaskDefinition (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat/src/internal/core/runtime-environment.ts:217:14)
    at Environment.run (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat/src/internal/core/runtime-environment.ts:129:14)
    at SimpleTaskDefinition.action (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat-deploy/src/index.ts:528:32)
    at Environment._runTaskDefinition (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat/src/internal/core/runtime-environment.ts:217:14)
    at Environment.run (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat/src/internal/core/runtime-environment.ts:129:14)
    at SimpleTaskDefinition.action (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat-deploy/src/index.ts:605:5)
    at DeploymentsManager.executeDeployScripts (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat-deploy/src/DeploymentsManager.ts:1058:19)
    at processTicksAndRejections (node:internal/process/task_queues:96:5)
    at DeploymentsManager.runDeploy (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat-deploy/src/DeploymentsManager.ts:891:5)
    at Environment._runTaskDefinition (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat/src/internal/core/runtime-environment.ts:217:14)
    at Environment.run (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat/src/internal/core/runtime-environment.ts:129:14)
    at SimpleTaskDefinition.action (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat-deploy/src/index.ts:528:32)
    at Environment._runTaskDefinition (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat/src/internal/core/runtime-environment.ts:217:14)
    at Environment.run (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat/src/internal/core/runtime-environment.ts:129:14)
    at SimpleTaskDefinition.action (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat-deploy/src/index.ts:605:5)
    at Environment._runTaskDefinition (/home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat/node_modules/hardhat/src/internal/core/runtime-environment.ts:217:14)
error Command failed with exit code 1.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.
error Command failed.
Exit code: 1
Command: /usr/bin/node
Arguments: /usr/lib/node_modules/yarn/lib/cli.js deploy --reset
Directory: /home/rishabh/Documents/practice/solidity-practice/challenge-2-token-vendor/packages/hardhat
Output:

info Visit https://yarnpkg.com/en/docs/cli/workspace for documentation about this command.
error Command failed with exit code 1.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.

I am struggling for two days to solve this issue but can't find any solution. May anyone look into this what's the issue. The Vendor contract is inheriting Ownable from openzepplin.

Challenge 0 - Update screenshot in checkpoint 4 to include the MINT NFT button.

Getting error message, when I run npx hardhat run script/deploy.js --network goerli

Terminal error response:Error HH100: Network goerli doesn't exist

For more info go to https://hardhat.org/HH100 or run Hardhat with --show-stack-traces

require("@nomicfoundation/hardhat-toolbox");
require("dotenv").config();
require("@nomiclabs/hardhat-ethers");

/** @type import('hardhat/config').HardhatUserConfig */

module.exports = {
solidity: "0.8.7",
Network:{
hardhat: {
Goerli: {
url: process.env.RPC_URL,
account: [process.env.PRIVATE_KEY],
},
},
},
etherscan: {
apiKey: process.env.ETHERSCAN_KEY,
},
};

The it("Should not call DiceGame for a roll greater than 2") test is missing an await in front an expect assertion.
Without it, when it fails, the test has a race condition that makes it look another test is causing the failure.

File location is: challenge-3-dice-game/packages/hardhat/test/challenge_3.js)

Fix needs to be:
await expect(riggedRoll.riggedRoll()).to.reverted;

I am getting this error when I run yarn deploy. I tried different solutions but not working.
does anyone also having this issue?

TypeError: ethers.getContract is not a function

There is a bug at line 114 where the the call to stake is being made from the owner signer instead of secondAccount.

This line needs to be :

const stakeResult = await stakerContract.connect(secondAccount).stake({value: ethers.utils.parseEther("0.001")});

Without this change, the test case cannot pass since secondAccount's balance never changes and the assertion of equality on line 144 will never be true.

NOTE: This entire test case probably needs to be redone due to changes in the withdraw method signature included in #88. If withdraw is intended to work without specifying an address, the comparison on line 144 will have to account not only for the difference in the stake being returned after the call to withdraw but also the gas used in calling the transaction. The withdraw method would also have to be called on the contract returned from stakerContract.connect(secondAccount) also.

Text in the completeDisplay div (app.jsx:283) isn't readable when using dark mode (white on light green).

Instructions to verify the contracts on Etherscan exist in both checkpoint 5 and checkpoint 7. Instructions should be removed from the bottom of checkpoint 5.