ups3's Introduction

ups3

This repository is a fork from the original Raspberry Pi UPS HAT V3 repository with the focus of making it compatible with python3.

Owners email contact: [email protected]

Test

This project has been tested on a Raspberry Pi 4 (Buster) system.

Setup (Raspberry Pi)

git clone https://github.com/geekworm-com/ups3.git

cd ups3

chmod +x *.sh *.py

sudo ./install.sh

           ┌────────────────────┤ UPS V3 Setting ├────────────────────┐
           │ Select the appropriate options:                          │
           │                                                          │
           │                 1 UPS GPIO [ 18 ]                        │
           │                 2 LED Brightness [ 10% ]                 │
           │                 3 Poweoff power [ <5% ]                  │
           │                 4 Auto run script [ enabled ]            │
           │                 5 Safe shutdown [ enabled ]              │
           │                 6 Apply Settings                         │
           │                 7 Remove                                 │
           │                 8 Exit                                   │
           │                                                          │
           │                                                          │
           │                                                          │
           │                                                          │
           │                          <Ok>                            │
           │                                                          │
           └──────────────────────────────────────────────────────────┘

View Status:

sudo python status.py or sudo python status.py -t

View logs:

cat /var/log/smartups.log

Recommend Projects