• 中文版本

This Arduino library provides the lua 5.3.6 ( release ) scripting engine for supported devices. This allows dynamic execution of Lua code on the Arduino without having to compile and flash a new firmware.

Supported devices:

• ESP8266
• ESP32/ESP32S2/ESP32C3/ESP32S3
• Arduino Uno R4 Minima/WiFi
• Raspberry Pi Pico/Pico W

Along with the Lua 5.3.6 Core the following Lua standard libraries are included:

• base (print(), tostring(), tonumber(), etc.)
• math
• table (insert(), sort(), remove(), ...)
• string (len(), match(), ...)

After installing the library, some sketch examples are available from the File menu, then Examples and finally under Arduino-Lua. The examples include ExecuteScriptFromSerial which takes a lua script from the serial line and executes it. As an example, the following standard Arduino functions are available in lua scripts as bindings:

• pinMode()
• digitalWrite()
• delay()
• millis()
• print() (only builtin binding)

# Enter the lua script and press Control-D when finished:
print("My first test!")
# Executing script:
My first test!


# Enter the lua script and press Control-D when finished-
print("Current uptime: " .. millis())
# Executing script:
Current uptime: 159926.0


# Enter the lua script and press Control-D when finished:
print("Hello world!")
# Executing script:
Hello world!


# Enter the lua script and press Control-D when finished:
pinLED = 2
period = 500
pinMode(pinLED, OUTPUT)
while(true)
do
  print("LED on")
  digitalWrite(pinLED, LOW)
  delay(period)
  print("LED off")
  digitalWrite(pinLED, HIGH)
  delay(period)
end
# Executing script:
LED on
LED off

ESP8266: Sketch uses 327776 bytes (31%) of program storage space. Maximum is 1044464 bytes. Global variables use 31276 bytes (38%) of dynamic memory, leaving 50644 bytes for local variables. Maximum is 81920 bytes.

ESP32: Sketch uses 310749 bytes (23%) of program storage space. Maximum is 1310720 bytes. Global variables use 15388 bytes (4%) of dynamic memory, leaving 312292 bytes for local variables. Maximum is 327680 bytes.

Arduino Uno R4: Sketch uses 133756 bytes (51%) of program storage space. Maximum is 262144 bytes. Global variables use 2836 bytes (8%) of dynamic memory, leaving 29932 bytes for local variables. Maximum is 32768 bytes.

Raspberry Pi Pico: Sketch uses 124736 bytes (5%) of program storage space. Maximum is 2093056 bytes. Global variables use 10352 bytes (3%) of dynamic memory, leaving 251792 bytes for local variables. Maximum is 262144 bytes.

#include <LuaWrapper.h>

LuaWrapper lua;

void setup() {
  Serial.begin(115200);
  String script = String("print('Hello world!')");
  Serial.println(lua.Lua_dostring(&script));
}

void loop() {

}

ESP8266: Sketch uses 365276 bytes (34%) of program storage space. Maximum is 1044464 bytes. Global variables use 34712 bytes (42%) of dynamic memory, leaving 47208 bytes for local variables. Maximum is 81920 bytes.

ESP32: Sketch uses 309913 bytes (23%) of program storage space. Maximum is 1310720 bytes. Global variables use 15388 bytes (4%) of dynamic memory, leaving 312292 bytes for local variables. Maximum is 327680 bytes.

Lua 5.3 Reference Manual