shuirna / electricsleep Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/electricsleep
Automatically exported from code.google.com/p/electricsleep
What steps will reproduce the problem?
1. Install on HTC Incredible
2. Run calibration wizard
3. Press button to standby when prompted
What is the expected output? What do you see instead?
Phone wakes up after 10 seconds, but prompt to press button remains with no way
to continue. Kill app, retry, same. No apparent way to proceed.
What version of the product are you using? On what operating system?
Please provide any additional information below.
Possibly problem with Widget Locker app? Possible that problem occurs when net
connection exists but signal is too weak?
Interesting idea, but gave up after second attempt.
Original issue reported on code.google.com by nate%[email protected]
on 19 Dec 2010 at 5:48
What steps will reproduce the problem?
1. Go to settings
2. Look under calibration
3.
What is the expected output? What do you see instead?
Expect to be able to select either deep or light sleep. Both selections are
dim and inaccessible
What version of the product are you using? On what operating system?
Couldn't find version number..beta. Android 2.2 on motorola droid x.
Please provide any additional information below.
First used automatic calibration (it set itself to 0.0 and 7.5. After sleeping
all night I woke on my own 10 minutes b4 alarm was set to go off. I, moved to
see if the alarm would go off.. No. then picked up and shook the clock...Did
not go off. Re-calibrated (0.0 and 0.01) alarm went off at the slightest
movement. Need to be able to find the happy medium.
Original issue reported on code.google.com by [email protected]
on 1 Nov 2010 at 10:52
Hi,
Could it be possible to have so example of normal graphing?
It could help people to configure electricsleep.
I have personally problems to get good results, it is either too much sensible
or not enough (linked to the fact I sleep on a futon) and it would help me to
compare my results with "normal" one in order to be sure they are ok.
Also, could you add some docs about the options, for example for the sensor
delays thing, I really don't understand its meaning...!
Thank you
Original issue reported on code.google.com by [email protected]
on 11 Dec 2010 at 10:45
What steps will reproduce the problem?
1. Enable any alarm
2. Wait for it to go off
3.
What is the expected output? What do you see instead?
There's no sound, plus buggy.
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 26 Oct 2010 at 4:29
What steps will reproduce the problem?
1. Set up and run overnight
2. (had to pick up phone to make alarm sound - cal 0.18 manually set) dismissed
alarm
3. Entered a comment & tried to save record.
What is the expected output? What do you see instead?
Expected the sleep information to be Saved (as in previous versions) but no
history was was recorded. (the phone just alarmed again while writing this -
see previous issue report).
What version of the product are you using? On what operating system?
0.4.0 - first use. Droid x, android 2.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 7 Dec 2010 at 11:41
In analysis after saving, the time to fall asleep is recorded as the same as
the duration.
Droid x android 2.2
ES v0.5.2 beta
Original issue reported on code.google.com by [email protected]
on 17 Dec 2010 at 12:01
What steps will reproduce the problem?
1. Recognising movement during sleep, although phone is on bed & I know I'm
waking up during the night, no difference is recorded on the graph.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
HTC Desire,
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 4 Nov 2010 at 5:36
Suggest adding the capability to edit note after the session has been saved. I
have wanted to make changes after the save action several times.
Thanks
Original issue reported on code.google.com by [email protected]
on 17 Dec 2010 at 12:10
What steps will reproduce the problem?
1. Select non alarm mode
2. Start "sleep"
3. Try to change mode to alarm
can't change your mind and then select alarm. Get "not bound to" alarm
message. Sometimes force stop message (app then starts right back up, and
still cannot make it use the alarm, or stop monitoring. Must cycle power.
What is the expected output? What do you see instead?
Expect a way to stop the current action (alarm our monitoring) without having
to cycle power.
What version of the product are you using? On what operating system?
Beta 0.3.0 droid 2.2 droid x
Please provide any additional information below.
First had the problem when I tried to change the calibration level after the
sleep mode had started (graph was maxing out, wanted to increase the
sensitivity). Got the force stop write then also as I changed the level - but
not every time.
Original issue reported on code.google.com by [email protected]
on 13 Nov 2010 at 6:23
What steps will reproduce the problem?
1. Run accelerometer calibration - my results on Nexus One = 600/1100
2. Go into settings -> calibration
3. Manual sensitivity sliders are pegged at the max, as they only go up to 200.
What is the expected output? What do you see instead?
Manual accelerometer calibration calibration should allow much larger values. Up to, say, 2000 seems reasonable based on very quick playing around with the calibration wizard.
The current maximum of 200 on both of these sliders is not sufficient to be able to tweak the values created by the wizard.
What version of the product are you using? On what operating system?
- 0.1.1 beta, installed 26/10/10
- Nexus One, Android 2.2.1 - Froyo build FRG83.
Other Suggestions:
- The max values of the sliders could be ranged dynamically, based on the current setting/wizard results, allowing for variation between devices and not losing accurate adjustment.
- Deep Sleep slider could use a smaller range than the Light Sleep one.
Original issue reported on code.google.com by [email protected]
on 27 Oct 2010 at 10:13
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
It should show a graph that should show some stats but it shows me that I had
light sleep all night
What version of the product are you using? On what operating system?
Htc desire hd europe nonbranded rooted android 2.2
Please provide any additional information below.
It doesent work
Original issue reported on code.google.com by [email protected]
on 7 Dec 2010 at 12:09
Since updating to the latest version, it seems the graphics have gone a bit
crazy.
Running under MIUI 12-3 on a Nexus One.
Screenshot : http://db.tt/zwrTfQY
Original issue reported on code.google.com by [email protected]
on 11 Dec 2010 at 10:16
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
It should show a graph that should show some stats but it shows me that I had
light sleep all night
What version of the product are you using? On what operating system?
Htc desire hd europe nonbranded rooted android 2.2
Please provide any additional information below.
It doesent work
Original issue reported on code.google.com by [email protected]
on 7 Dec 2010 at 12:09
suggest a capability to export the historical information into a.csv format
file (along with any calibration information, alarm settings and comments-if
that feature is implemented)
Original issue reported on code.google.com by [email protected]
on 4 Dec 2010 at 3:55
What steps will reproduce the problem?
1. Enable Force Screen On in the Setting Menu
2. Activate Alarm (monitoring then starts and the screen goes dim)
3. Touch Screen becomes unresponsive.
What is the expected output? What do you see instead?
Once the alarm is activated, there's no way of undimming the screen to see the
program of the monitoring. The only way I figured to turn the screen back on is
pressing the Home button which takes me out of the app but once I go back to
Electricsleep the screen goes dim again.
I wanted a way to undim the screen so I can monitor the progress of my sleep.
Would it be possible to add a feature such that tapping the screen would
momentarily turn the screen back on? As I write this out, I also realize that I
have no way of canceling the alarm once the screen goes because the screen does
respond to me.
What version of the product are you using? On what operating system?
I'm using the latest version of ElectricSleep available in the Market. I have
Froyo on a myTouch 4G.
Please provide any additional information below.
Thank you so much for your time.
Original issue reported on code.google.com by [email protected]
on 17 Dec 2010 at 3:58
Hi,
All is in the title, here is a use case for it:
When I take a nap, I would like to be able to say to the app: "wake me up
after one cycle".
Is it relevant (in terms of sleep)? Is it possible (in terms of code)?
Thank you very much!
Original issue reported on code.google.com by [email protected]
on 30 Nov 2010 at 12:41
What steps will reproduce the problem?
1. run program thru night and can view log
2. instruct to save history
3. fails to save history because says data period too short despite the fact it
is 7 hours
What is the expected output? What do you see instead?
file saved, history analyzed
What version of the product are you using? On what operating system?
Current downloaded version, a droid x, android 2.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 18 Dec 2010 at 12:43
1. Set screen brightness to the minimum possible (using AdjBrightness or
CyanogenMod)
2. Set the phone to never sleep using KeepAwake or something
3. Run ElectricSleep for a night
My phone is found dead in the morning. This may be considered expected, but
just keeping the phone on without running ElectricSleep, or running another
similar program like Smart Alarm Clock or Sleep As A Droid doesn't cause so
drastic power drainage.
Version 0.2.1 beta.
Original issue reported on code.google.com by [email protected]
on 3 Nov 2010 at 2:14
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
I expect a chart with ups& downs bit its usually only a
Slightly graded slope or a flat line for the whole night.
What version of the product are you using? On what operating system?
Using on an HTC incredible, Android v.2.2 operating system
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 19 Nov 2010 at 7:02
Is it possible to make a zoom function on the graphs? because sometimes when i
sleep for over 12 hours it's hard to see the smaller differences.
Original issue reported on code.google.com by [email protected]
on 6 Dec 2010 at 2:03
i have several different sleep environments and would love to be able to store
multiple sleep location calibrations rather than having to recalibrate or
reenter new settings.
Original issue reported on code.google.com by [email protected]
on 11 Nov 2010 at 11:02
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
The app won't quit...no option
Original issue reported on code.google.com by [email protected]
on 13 Dec 2010 at 1:48
Android devices implement how they update accelerometer changes in different
ways. The current implementation of ElectricSleep does not work for all types
of Android devices.
Original issue reported on code.google.com by [email protected]
on 28 Oct 2010 at 7:01
What steps will reproduce the problem?
1. The output needs to have a consistent time frame, for example 3am 4am 5am,
not something like 3:11 4:56 6:21.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Latest one on 2.2 froyo moto droid
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 14 Nov 2010 at 9:19
suggest you add sensitivity level information to the analysis screen.
I have been trying to home in on the optimum level for my phone and environment.
Original issue reported on code.google.com by [email protected]
on 17 Dec 2010 at 12:06
What steps will reproduce the problem?
1. Ran a sleep analysis all night.
2. After sleeping, the graph showed a lot of data.
3. Save the sleep data and attempt to view it in my History.
What is the expected output? What do you see instead?
I expected to see a graph with a bar or line graph. Instead, I see a graph with
no data. There is no green line showing the data I saw before.
What version of the product are you using? On what operating system?
Motorola Droid 1 running Froyo.
Please provide any additional information below.
I like the idea of this app, but it seems too broken to use on my phone. I'd
like to help improve this.
Original issue reported on code.google.com by [email protected]
on 1 Dec 2010 at 9:46
What steps will reproduce the problem?
1. Sleep
2. Wake-up
3. Rate and Save the chart
4. Visualise it (the screen appears by itself after saving)
5. Go back with return key
What is the expected output? What do you see instead?
Should go back to the introductory screen, but instead stays blocked on a
"saving sleep" message on top of the rating screen.
What version of the product are you using? On what operating system?
0.3.1, Android 2.2
Please provide any additional information below.
Thank you for this wonderful app, I have been using it for 2 days, so I didn't
completely benefited of it yet, but I presage that it would really be helpful
:)))
Original issue reported on code.google.com by [email protected]
on 30 Nov 2010 at 12:11
What steps will reproduce the problem?
1. Use htc desire w. Froyo
2. Start.monitoring sleep
3. View sleep
What is the expected output? What do you see instead?
A proportional graph instead of the one I registered.
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 18 Nov 2010 at 11:06
Hi,
First of all, I love this app. I have been using both electric sleep and sleep bot these days. I am also a user of Gentle Alarm, which is also a really good app. It now integrates with sleep bot perfectly. So I think your app should not reinvent the wheel and just integrate with sleep bot as well. One tracks the sleep movement one tracks the daily sleep. I saw it on their blog that they allow other apps to do it. Will donate if nice integration is done.
Thanks,
John
Original issue reported on code.google.com by [email protected]
on 9 Dec 2010 at 7:10
What steps will reproduce the problem?
1. Set alarm
2. Have the alarm go off because of moment
3. Select "dismiss" (not snooze)
What is the expected output? What do you see instead?
Expect Alarm is dismissed for the day.
Alarm goes off again at the preset time.
What version of the product are you using? On what operating system?
Beta-most recent dod droid 2.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 5 Nov 2010 at 10:57
What steps will reproduce the problem?
1. Record sleep
2. Press save
3. Try to see history
What is the expected output? What do you see instead?
Says no history
What version of the product are you using? On what operating system?
Bets
Please provide any additional information below.
Droid x
Original issue reported on code.google.com by [email protected]
on 12 Dec 2010 at 2:40
When I report an issue the form asks about version. I can't find the version
number in the app.
Original issue reported on code.google.com by [email protected]
on 7 Dec 2010 at 12:44
Why is electricsleep only available for Android 2.2?
Original issue reported on code.google.com by [email protected]
on 10 Dec 2010 at 12:01
What steps will reproduce the problem?
1. Sleep with alarm
2. Dimiss it, begin to save sleep
3.
What is the expected output? What do you see instead?
Save sleep without alarm, instead the alarm pops up again
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 16 Dec 2010 at 4:39
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 13 Nov 2010 at 1:37
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 18 Dec 2010 at 12:33
What steps will reproduce the problem?
1. One or two nights of sleep. My case one.
2. Reinstalling does the same.
3. That's all I can think of
What is the expected output? What do you see instead?
The expected outcome was to see the sleep history graph to be showing the
actual light sleep patterns etc. The actual outcome however is the graph
increases largely throughout the night and not showing sleep patterns.
What version of the product are you using? On what operating system?
I have the latest version from the android market and run Android 2.2 HTC Hero
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 18 Nov 2010 at 8:36
Suggest adding the ability to attach a comment to a night's history. e.g.
"light on" "fell asleep reading" "sleeping aid", "cold room", "woke up at
3:17".
A 256 character field should be plenty.
Original issue reported on code.google.com by [email protected]
on 4 Dec 2010 at 3:51
What steps will reproduce the problem?
1. Opening the app
2.
3.
What is the expected output? What do you see instead?
A small header bar
What version of the product are you using? On what operating system?
0.51 on miui 0.12.11 on an N1
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 15 Dec 2010 at 10:57
What steps will reproduce the problem?
1. Press sleep
2. Finish sleep, press finish, rate sleep
3. axis of graph shows but no data
What is the expected output? What do you see instead?
I expect to see the results of the sleep, instead I see only axis
What version of the product are you using? On what operating system?
HTC desire
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 10 Nov 2010 at 12:53
What steps will reproduce the problem?
1. don't know how to reproduce, Calibrated b4 going to bed (0.0 and 0.45).
Started sleep action and verified recording and that motion was registering
(good). Slept. Awakened by independent clock radio. Moved..no alarm. Moved
more..no alarm. Picked up phone..alarm after a slight but notable delay (1/2
sec?). Display all green, showing current minute, not all night history.
2. tried to turn down the volume on the very annoying rooster while I tried to
figure out how to get the turn off alarm window only got ring volume..not
media volume
3. Started sleep again in the hope that I would get the alarm off option. I
got a constipated rooster for about a second and then the alarm continued...but
no off option. Did that twice.
4. Tried to turn off the app with "Advanced task killer". The app doesn't
show in the list.
5. Tried to turn off the alarm in the app's settings. Didn't work.
6. Had to turn off phone lost history (my SD card is not working...waiting
for a replacement)
What is the expected output? What do you see instead?
Didn't get the turn off alarm option. Saw sleep history screen for the minute
of waking up. Had to turn off phone to get alarm to stop.
What version of the product are you using? On what operating system?
Beta version, android 2.2 motorola droid X.
Please provide any additional information below.
Woke up in the middle of the night and checked to see that the history was
working...looked reasonable.
Original issue reported on code.google.com by [email protected]
on 2 Nov 2010 at 10:05
Would love to see additional alarm functionality similar to gentle alarm
(snooze limitations and different times between snooze alarms, some type of
test to determine if you ate awake) as well as alarms that are more
personalized like using a playlist or specific sound. Also it is sometimes hard
to see graph details because it is so small; would it be possible to add
zooming functionality to the graphs? Really looking forward to see the
development odd this app! Great work!
Droid incredible with latest electric sleep update.
Original issue reported on code.google.com by [email protected]
on 14 Nov 2010 at 8:56
What steps will reproduce the problem?
1. Set the alarm
2. The alarm goes off
3. Dismiss alarm
What is the expected output? What do you see instead?
I would expect the alarm to stop beeping, but instead the only thing that stops
it is a complete phone restart.
What version of the product are you using? On what operating system?
Most recent, downloaded today. Android 2.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 10 Nov 2010 at 5:16
What steps will reproduce the problem?
1. Enable 'use alarm' in settings
2. Set an alarm and enable it
3. Disable 'use alarm' in settings
What is the expected output? What do you see instead?
Expected: no alarm ever goes off
Actual: enabled alarms go off
What version of the product are you using? On what operating system?
latest beta from market on android 2.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 4 Nov 2010 at 10:51
Suggest you add an calibration data to the graph, as well as a horizontal
threshold line. Perhaps including this information could be optional. As I
try to determine the correct calibration level for my phone/bed it would be
useful.
--Thanks
Original issue reported on code.google.com by [email protected]
on 5 Nov 2010 at 10:50
What steps will reproduce the problem?
1. I will try again tomorrow, but I think the phone is not sinsative enough.
2.
3.
What is the expected output? What do you see instead?
I expected a graph of how I slept and it was blank
What version of the product are you using? On what operating system?
Moto droid, 2.2. Electric sleep downloaded 11/30/10
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 1 Dec 2010 at 2:53
What steps will reproduce the problem?
1. I set my alarm for 8 am.
2. I set the early wake up at 30 minutes
3. I kept snoozing until 9:30 am
What is the expected output? What do you see instead?
I expected the app to record from 1 am to 9:30 am. Instead, the app only
produced a graph from 1 am to 7:40 am. 7:40 am was the first time the alarm
went off. The app said I only slept for six and a half hours when I slept for
about eight and a half.
What version of the product are you using? On what operating system?
Android 2.2 on a myTouch 4g
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 7 Dec 2010 at 2:57
Suggestion.
If you could make it possible for your app to invoke alarms from other
applications. Since I am a really heavy sleeper I have an app with math
problems for alarm clock. If that's not possible, maybe you can add math
functionality in the built in alarm.
Original issue reported on code.google.com by [email protected]
on 28 Oct 2010 at 6:13
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.