si0ls / u-boot-orangepi5 Goto Github PK

Hi,

So I previously had been running Ubuntu (on an Orange Pi 5 Plus) from the NVMe drive and for flashing this I booted ubuntu from an SD card and then flashed the firmware.

After that, I am unable to boot from NVMe. Whenever I try to run orangepi-config and choose "Boot from SPI Flash" it says No partitions available on /dev/nvme0n1

How exactly am I supposed to install talos on NVMe? Because I tried dd to flash the talos image to /dev/nvme0n1 and it flashed fine, but when I remove the SD card and reboot, the Pi doesn't turn on (Static Red light)

I then tried running orangepi-config again but it still says no partitions on /dev/nvme0n1. Am I missing something here?

Note that I also have an eMMC card installed. Not sure if that is conflicting with anything or causing issues

I installed the official 2024.07 release (1.1) and do not see my NVME device nor are any Ethernet devices visible. The pci command says there is no such bus.

This is a 32GiB Orange Pi 5 Plus board.