• Build of a custom Linux distribution from source (e.g. Gentoo install).
• The procedure takes several hours to complete.
• The RAM usage will be as high as 4GiB per each core of your CPU.
• The build will take around 32GiB of your storage.

The requirements for the build are listed in a Dockerfile located in the root of this repository. Docker image build using the Dockerfiles is used for CI build.

git clone [email protected]:prusa3d/Prusa-Firmware-SL1.git
git tag -a -m "My custom build" my_custom_build
git submodule init
git submodule update

cd keys
sh gen_certs.sh # Skip this if you already have the keys
sh deploy_certs.sh
cd ..

source ./oe-init-build-env
bitbake sla-dev-image # other targets are sla-update-bundle, sla-bootstrap

• With bmaptool

  bmaptool copy tmp/deploy/images/prusa64-sl1/sla-dev-image-prusa64-sl1.wic /dev/mmcblkXXX

• With dd

  dd if=tmp/deploy/images/prusa64-sl1/sla-dev-image-prusa64-sl1.wic of=/dev/mmcblkXXX bs=1M

• sla-dev-image: development-enabled μSD image
• sla-bootstrap: μSD image for eMMC bring-up
• sla-update-bundle: OTA & offline update package

A matching (e)SDK installer can be produced alongside an image by adding {+ -c populate_sdk +} or {+ -c populate_sdk_ext +} to the bitbake [target] command.