smartboxchannel Goto Github PK

efekta_eon29wz

Indoor climate sensor EFEKTA_eON29wz with e-ink display

efekta_iaq

efekta_iaq_s

efekta_pixel_air

efekta_pixelaq

efekta_water_leak_sensor

efekta_wireless_touch_switch

efetta_th-02

embedded-sht

Embedded SHT Drivers for Sensirion Temperature and Humidity Sensors - Download the Zip Package from the Release Page

eon-aqsens_213_v2_ed3-efektalab

Wireless, battery-operated Mini air quality and weather station. Air quality, temperature, humidity, pressure, weather forecast. Designed on the RF52810, nRF52811, nRF52832, nRF52833, nRF52840 wireless radio modules. The temperature, humidity and pressure sensor BME280, temperature and pressure sensor BMP280, temperature and humidity sensor SHTC3, light sensor MAX44009, air quality sensor SGP40 is used The device is powered by CR2477 battery. Consumption when transmitting data is 8mA, in sleep mode is 325uA-35uA (see datasheet SGP40).

eon-indoor_climate_sensor_290-efektalab

New arduino project. Wireless weather mini station with electronic ink display 2.9 inches (GDEH029A1 OR GDEM029T94), very low power consumption,compact size, housing with magnets. The device can use si7020 / 21, sht20 / 21, HTU20/21D or BME280 sensors. Use the MINEW MS50SFA RF module with nRF52832 chips, or the EBYTE E73 module with nRF52840 and nRF52833 chips.

eon-indoor_climate_sensor_efekta_eon29wz

It's a fully assembled and programmed compact wireless devices, atmospheric pressure, temperature, humidity, weather forecaster, illumination, charts with 2.9" e-paper display, resolution of 296 x 128 pixels. The device has an industrial look, at least I wanted to achieve this. The sensor has good energy efficiency. Powered by CC2530 chip (Zigbee).

epdiy

EPDiy is a driver board for affordable e-Paper (or E-ink) displays.

esp8266_htu21d

ESP8266 Driver for Measurement Specialties HTU21D i2c Temperature and Relative Humidity Sensor

gdew0102i4f

good-display-software

Good-Display

htu21d_generic_c_driver

Generic C driver for the HTU2xD(F) sensor

htu21dlibrary

lazyrolls

light_sensors_stm32

BH1750, MAX44009 and TEMT6000 light sensors STM32 libraries

lis2dw12

Arduino library to support the LIS2DW12 3D accelerometer

lorapaper

LoraPaper Arduino Library

majordomo-zigbee2mqtt

max44009

Arduino library for the MAX44009 luxmeter chip

micro-multi-temperature-sensor-with-accelerometr

My new device, made specifically for the case with Aliexpress (33 * 33 * 10). The device is based on nRF52810, nRF52811, nRF52832 chips. BLE and ESB communication protocol. The sensor is a multi temperature sensor, it is possible to install sensors SI7020, SI7021, SHT20, SHT21, HTU21D, BME280, LMT01, TMP117, HDC2080. It is also possible to install an accelerometer LIS2DW12, LIS2DH12. Powered by CR2032 battery.

motion

DIY Zigbee CC2530 Motion sensor (AM312/ AM412/ BS312/ BS412), Temperature /Humidity /Pressure sensor (BME280), Ambient Light sensor (BH1750), Magnet sensor, Light Dependent resistor (LDR)

motion_bme280spi_bh1750_epd29

motion_bme280spi_bh1750_epd29

motion_bme280spi_magnet_ldr_bh1750

DIY Zigbee CC2530 Motion sensor (AM312), Temperature /Humidity /Pressure sensor (BME280), Ambient Light sensor (BH1750), Magnet sensor, Light Dependent resistor (LDR)

mysensors

MySensors library and examples

nrf52_soilsensor