FFTW library has an impressive list of other FFT libraries that FFTW was benchmarked against. Unfortunately, this list has not been updated since about 2005, and the situation has changed. (Update: Steven Johnson showed a new benchmark during JuliaCon 2019. In his hands FFTW runs slightly faster than Intel MKL. In my hands MKL is ~50% faster. Maybe I didn't squeeze all the performance from FFTW.)
FFTW is not the fastest one anymore, but it still has many advantages and it is the reference point for other libraries.
MKL
(Intel Math Kernel Library) FFT is significantly faster.
It's not open-source, but it is freely redistributable.
MKL has fantastic compatibility with FFTW
(no need to change the code, you just link it with MKL instead of fftw3)
and with NumPy (no need to change the code, just do pip install mkl-fft
).
KFR also claims to be faster than FFTW, but I read that in the latest version (3.0) it requires Clang for top performance, so I didn't benchmark it.
FFTS (South) and FFTE (East) are reported to be faster than FFTW, at least in some cases. I'd benchmark them if I had more time.
muFFT
and pffft
seem to have performance comparable to FFTW while being much simpler.
Update: there is also PGFFT in this category.
Libraries that are not vectorized such as KissFFT, meow_fft tend to be slower, but are also worth considering.
PocketFFT
is vectorized only for multi-dimensional transforms (or for doing
multiple 1D transforms). Unlike in other projects, it
uses __attribute__((vector_size(N))
instead of intrinsics.
Which makes it platform independent, but requires GCC or Clang
for vectorization.
I don't plan to use GPU for computations, so I won't try cuFFT, clFFT, fbfft, GLFFT, etc.
First, a quick look at these projects:
Library | License | Since | Language | KLOC | Comments |
---|---|---|---|---|---|
FFTW3 | GPL or $ | 1997 | 100+ | ||
MKL | freeware | 20?? | ? | ||
KFR | GPL or $ | 2016 | C++14 | ~20 | |
FFTS | MIT | 2012 | C | 24 | |
FFTE | custom | 20?? | Fortran | ||
muFFT | MIT | 2015 | C | 2.5 | |
pffft | BSD-like | 2011 | C | 1.5 | |
PGFFT | 2-BSD | 2019 | C++11 | 1.0 | |
KissFFT | 3-BSD | 2003 | C | 0.7+1.1 | 1.1 for tools/ |
meow_fft | 0-BSD | 2017 | C | 1.9 | single header |
pocketfft | 3-BSD | 2010? | C++ | 2.2 | single header |
Note: pocketfft was originally in C, but now the repository has a cpp
branch and I'm migrating my benchmarks to it.
When I was looking for a fast JSON parser all the candidates were in C++, but here it's mostly C.
I'm primarily after 3D complex-to-real and real-to-complex transforms. For me, radices 2 and 3 are a must, 5 is useful, 7+ could also be useful.
r-N means radix-N (radix-4 and 8 are supported anyway as 2^N).
"++" in the "prime" column means the Bluestein's algorithm.
"+/-" for radix-7 means it's only for complex-to-complex transform.
"s" and "d" denote single- and double-precision data.
Library | r-3 | r-4 | r-5 | r-7 | r-8 | prime | 2D | 3D | s | d |
---|---|---|---|---|---|---|---|---|---|---|
FFTW3 | + | + | + | + | + | ++ | + | + | + | + |
MKL | + | + | + | + | + | +? | + | + | + | + |
KFR | + | + | + | + | + | - | - | - | + | + |
FFTS | - | + | - | - | + | ++ | + | + | + | + |
FFTE | + | + | + | - | + | - | + | + | - | + |
muFFT | - | + | - | - | + | - | + | - | + | - |
pffft | + | + | + | - | - | - | - | - | + | - |
PGFFT | - | - | - | - | - | ++ | - | - | - | + |
KissFFT | + | + | + | - | - | + | + | + | + | + |
meow_fft | + | + | + | - | + | + | - | - | + | - |
pocketfft | + | + | + | +/- | - | ++ | + | + | + | + |
Additionally, for pffft compiled with enabled SIMD the fft size must be a multiple of 16 for complex FFTs and 32 for real FFTs.
(let me know if I got anything wrong)
I run all the benchmarks here on i7-5600U CPU.
Just to get an idea, I checked the speed of popular Python libraries
(the underlying FFT implementations are in C/C++/Fortran).
I used only two 3D array sizes, timing forward+inverse 3D
complex-to-complex FFT.
Here are results from the preliminary.py
script on my laptop
(numpy and mkl are the same code before and after pip install mkl-fft
):
lib 120x128x96 416x256x416
numpy 0.196 8.742
mkl 0.009 0.504
scipy 0.106 7.091
pyfftw 0.060 4.442
This is before NumPy switched to PocketFFT. NumPy will use internally PocketFFT from version 1.17, which is not released yet when I'm writing it.
(Update: I'm not planning on updating the results, but it's worth noting
that SciPy also switched to PocketFFT in version 1.4.0.
And added module scipy.fft
with different API than the old scipy.fftpack
.
While NumPy is using PocketFFT in C, SciPy adopted newer version in templated C++.)
MKL is here as fast as in the native benchmark below (3d.cpp
)
while other libraries are slower than the slowest FFT run from C++.
FFTW3 is a couple MB.
PocketFFT (C version) and muFFT are about 80kB.
PocketFFT has more butterflies but muFFT has each in four versions (no-SIMD,
SSE, SSE3 and AVX).
pffft and meow_fft are about 32kB.
pffft has also four versions (no-SIMD, SSE1, AltiVec and NEON),
but only one is compiled.
KissFFT (1D complex-to-complex) is only about 20kB. PGFFT โ a few kB more.
I'm benchmarking primarily lightweight libraries, and FFTW as the reference point. All the benchmarks on this page are:
Run on (4 X 3200 MHz CPU s)
CPU Caches:
L1 Data 32K (x2)
L1 Instruction 32K (x2)
L2 Unified 256K (x2)
L3 Unified 4096K (x1)
complex-to-complex (from running 1d.cpp
compiled with GCC8 -O3)
n=256 n=384 n=480 n=512
fftw3 est. 321 ns 499 ns 1538 ns 663 ns
fftw3 meas. 274 ns 443 ns 883 ns 588 ns
mufft 325 ns n/a n/a 719 ns
pffft 585 ns 1014 ns 1329 ns 1255 ns
fftw3 est. NS 1826 ns 3254 ns 4776 ns 4095 ns
fftw3 meas. NS 1699 ns 2748 ns 3855 ns 3832 ns
mufft NS 1784 ns n/a n/a 4024 ns
pffft NS 1768 ns 2907 ns 4070 ns 3792 ns
pocketfft 1690 ns 3035 ns 3633 ns 4009 ns
meow_fft 2120 ns 4718 ns 5745 ns 4342 ns
kissfft 2536 ns 4929 ns 6030 ns 6553 ns
NS = disabled SIMD
I tested libraries with disabled SIMD (vectorization) because I plan to use FFT in WebAssembly which does not support SIMD instructions yet.
To a first approximation, SSE1 gives 3x speedup, AVX -- 6x.
Notes:
- I didn't compile FFTW3, I used binaries from Ubuntu 18.04
-ffast-math
doesn't seem to make a significant difference- When using Clang 8 instead of GCC, PocketFFT is ~12% faster.
- All libraries are tested with single-precision numbers, except for PocketFFT (C version) which supports only double-precision.
I'm yet to check the accuracy of results.
plan / setup (plan1d.cpp
)
Out of curiosity, I also checked how long it takes to generate a plan:
n=480 n=512
fftw3 est. 17871 ns 9693 ns
fftw3 meas. 31463 ns 25610 ns
mufft n/a 17103 ns
pffft 12763 ns 13730 ns
pocketfft 1267 ns 1274 ns
meow_fft 15092 ns 13878 ns
kissfft 15586 ns 15993 ns
PocketFFT has indeed very fast plan generation.
real-to-complex (1d-r.cpp
)
n=480 n=512
fftw3 est. 766 ns 814 ns
fftw3 meas. 718 ns 681 ns
mufft n/a 511 ns
pffft 634 ns 597 ns
fftw3 est. NS 2442 ns 1921 ns
fftw3 meas. NS 1812 ns 1735 ns
mufft NS n/a 2474 ns
pffft NS 2025 ns 1963 ns
pocketfft 2123 ns 2034 ns
meow_fftt 3591 ns 2660 ns
kissfft 3140 ns 2985 ns
NS = disabled SIMD
Notes:
- The output from different libraries is ordered differently.
- For small sizes (such as the ones above) R2C in FFTW (with SIMD) can be slower than C2C.
complex-to-complex (2d.cpp
)
256x256 480x480
fftw3 est. 1197 us 3002 us
fftw3 meas. 306 us 1497 us
mufft 259 us n/a
pocketfft 543 us 2270 us
fftw3 est. NS 1559 us 5582 us
fftw3 meas. NS 1033 us 4536 us
mufft NS 1092 us n/a
kissfft 1583 us 5766 us
Here, PocketFFT is compiled with SSE1 support only. It is faster when compiled with AVX support. I haven't tried AVX-512.
Here I also tried Intel MKL 2019 through its FFTW interface. No changes in the source code, only the linking command needs to be modified.
complex-to-complex (3d.cpp
)
128x128x320 256x256x256 416x256x416
MKL 38 ms 155 ms 492 ms
fftw3 est. 41 ms 730 ms 1860 ms
fftw3 meas. 39 ms 162 ms 727 ms
pocketfft 79 ms 264 ms 939 ms
fftw3 est. NS 253 ms 987 ms 2016 ms
fftw3 meas. NS 125 ms 443 ms 1476 ms
kissfft 216 ms 785 ms 4235 ms
real-to-complex (3d-r.cpp
)
128x128x320 256x256x256 416x256x416 90x128x120
MKL 17 ms 61 ms 185 ms 4 ms
fftw3 est. 28 ms 219 ms 605 ms 10 ms
fftw3 meas. 27 ms 98 ms 336 ms 7 ms
pocketfft AVX 30 ms 97 ms 311 ms 8 ms
pocketfft SSE 38 ms 126 ms 393 ms 10 ms
fftw3 est. NS 88 ms 285 ms 770 ms 19 ms
fftw3 meas. NS 62 ms 206 ms 715 ms 15 ms
kissfft 112 ms 436 ms 2078 ms 27 ms
PocketFFT compiled with AVX support is as fast as FFTW3.
matrix transpose (transpose.cpp
)
Out of curiosity, I've also checked how long it takes to transpose
a 3D matrix of type complex<float>
.
Only the last transpose is in-place (and it is also tiled).
256x256x256
assign 22 ms
naive zyx 204 ms
naive xzy 89 ms
naive yxz 25 ms
naive zxy 90 ms
naive yzx 202 ms
tiled zxy 49 ms
in-place zxy 91 ms
For my project PocketFFT has the best trade-off between the size, features and performance.
I considered FFTW as a compile-time alternative, but I'd need to change how my data is ordered. The c2r transform in FFTW requires data contiguous in the halved direction. Simply transposing the data before FFT would likely cancel out any performance benefit from using FFTW.
Update: I've been using PocketFFT for almost a year now. I use the cpp branch. It's a perfect fit for my needs.