Giter VIP home page Giter VIP logo

Comments (17)

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
hi. Hard to say, do other extensions like SBSettings work? 
Anyway, lease try to re-install/update MobileSubstrate using Cydia
There was a problem with it last week. Please report back here. Best Matthais

Original comment by [email protected] on 27 Jun 2010 at 6:17

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
SBSettings does work, I can use it successfully to control wifi, ssh, and 
veency.

One thing I have noticed is that after a complete power cycle my iPad is very 
unresponsive. Swiping between pages hangs and it takes away for presses to be 
recognized. SSHing into the iPad and doing 'sudo launchctl unload 
/System/Library/LaunchDaemons/com.apple.BTServer.plist' stops this and brings 
back the normal responsiveness. Once I've done this I can usually run BTStack 
GPS at least once before getting the "Bluetooth not accessible" message.

I'll try reinstalling MobileSubstrate today and get back to you on if it fixes 
it.



Original comment by [email protected] on 28 Jun 2010 at 1:43

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
what's the verdict? did it help?

Original comment by [email protected] on 3 Jul 2010 at 6:57

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
Unfortunately reinstalling sbsettings did not work.  My bluetooth is still 
showing as unavailable but it is active as other devices can detect my iPad. 
BTStack GPS does work when activated but regular bluetooth does not work and I 
cannot disable it either.

What logs can I get for you that would help you diagnose the problem?

Original comment by [email protected] on 12 Jul 2010 at 5:32

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
Before we check the logs, please try the following (slightly updated) version 
of BTstack. http://dl.dropbox.com/u/5138628/BTstack-0.2-799.deb In that, 
BTstack shuts down Apple Bluetooth server when it quits, this helps getting 
Apple's BT activated again. Do you know how to install the .deb? 

Original comment by [email protected] on 13 Jul 2010 at 6:45

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
I'm familiar with .debs and I've downloaded and installed it. It did have an 
error, listed below, but completed install. I do not have my gps available at 
the moment but I'll test everything out tonight and get back to you.

/var/lib/dpkg/tmp.ci/extrainst_: line 5: ldid: command not found.

Original comment by [email protected] on 13 Jul 2010 at 7:46

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
strange that the deb would complain about a missing ldid on OS 3.2. ldid is 
crucial for 4.0, but irrelevant for 3.2. Your problems actually are not 
relevant to the GPS itself, it's more switching between Apple's Bluetooth Stack 
and mine. I'm curious too.. :)

Original comment by [email protected] on 13 Jul 2010 at 7:58

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
Well it appeared to work initially but playing around last night with iBluever 
and BTStack GPS (man I wish I could use them together) it appeared again.

Right now if I power cycle my iPad on start it's slow and hangs until I use 
launchctl to unload BTServer. Also until I unload BTServer neither BTStack GPS 
or iBluever will run. Once I stop BTServer I can run either but when they are 
off my bluetooth still shows as up to other devices and it shows as unavailable 
under Settings.

Very weird.

Original comment by [email protected] on 16 Jul 2010 at 4:35

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
can you try uninstalling iBluever and see if switching between BTstack and 
Apple's Bluetooth work at least?

Original comment by [email protected] on 15 Aug 2010 at 2:29

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
I have the same problem on iPod touch. 

Original comment by [email protected] on 18 Aug 2010 at 4:39

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
My bluetooth is working fine. 
But BTStack GPS still says 'Bluetooth is not accessible'.
Actually it is, but BTStack GPS thinks it itsn't.

Original comment by [email protected] on 29 Aug 2010 at 10:45

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
OMFG... I'm so stupid!!! ; )

I was running Apple's bluetooth while opening BTStack GPS.
And that won't work of course. Forgive my bad.

Original comment by [email protected] on 29 Aug 2010 at 11:34

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
I had exactly the same issue. Feel dumb :) The program interface is very 
minimal, no help, no intro, just a message "Bluetooth not accessible". I 
suggest as a quick fix some help would be useful for paid application. As 
permanent fix it'd be nice to automatically deactivate Apple's stack upon 
BTStack launch and activate reverse back when external GPS is not available or 
upon program exit. 

Original comment by [email protected] on 9 Oct 2010 at 3:24

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
Hi. The BTstack apps do turn off Apple's Bluetooth but In the last BTstack 
Package, this got disabled by accident. Will be fixed in the next BTstack 
update.

Original comment by [email protected] on 9 Oct 2010 at 2:54

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
Due to the install of bt stack over-riding the ipad or devices bluetooth - all 
you need to do is turn off bluetooth in the setting menu of the device and then 
activate the bt stack mouse app.

it will search then select the mouse by tapping the screen on the item and it 
will work.

i spent nearly a entire morning trying to find this out and i couldn't believe 
it when it worked.

Original comment by [email protected] on 20 Nov 2010 at 10:35

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
Since the December 2010 update of BTstack, Apple's Bluetooth is properly turned 
off. It will also provide a new manual switch app/prefs bundle to select: off, 
iOS Bluetooth, or BTstack.

Original comment by [email protected] on 2 Apr 2011 at 4:40

  • Changed state: Fixed

from btstack.

GoogleCodeExporter avatar GoogleCodeExporter commented on September 27, 2024
hi guys srry to interrupt but whenever i turn on btstick on my ipad 2 ios 7 is 
makes the Bluetooth unavailable plz help.

Original comment by [email protected] on 28 Apr 2014 at 12:12

from btstack.

Related Issues (20)

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.