This repository is deprecated, please refer to https://github.com/Nase00/gtfo

Host controller for GTFO modules

Note: This configuration is still a work-in-progress and subject to change

Hardware:

• Raspberry Pi 2 Model B v1.1 running JESSIE (other models and distros likely work, but are untested)
• Raspberry Pi-compatible long-range WiFi dongle
• ~1ft ethernet cable
• n number of Particle Photons
• RGB LEDs

1. Setup each device to Particle's cloud service.
2. Load the VoodooSpark firmware onto each board.
3. Load the boards' access tokens and device id's into environment variables.

1. Load Debian JESSIE variant onto Raspiberry Pi.
2. Configure SSH and other desired settings.

Steps 3-5 are optional, follow them if no other reliable WiFi hotspots are available 3. Make certain the Raspiberry Pi has an internet connection working via eth0 4. Install a DHCP server and turn wlan0 into a WiFi access point. 5. Install and run this software via:

git clone https://github.com/Nase00/gtfo-nexus.git
cd gtfo-nexus
node gtfo.js